129 Series Hot Tap Pipe Plug System

stop your pipeline flow without depressurizing your pipe with the Petersons line stop plugging system this outworks begin by simply using an existing nozzle or installing a tapping saddle and valve and make the hot tap as usual next install the peterson plug into the insertion system launch cylinder then attach the peterson plug insertion system to the valve open the valve push the plug into place with the insertion system inflation ramp and attach an inflation pressure source to the inflation system inflation ramp inflate the plug to stop the flow when the job is done deflate the plug and pull the plug back into the launch tube of the Pedersen installation system turn off the valve and remove the installation system which can be used again and again accommodating almost any size pressure chemical or temperature which is one of the reasons why Peterson has remained a leader in the pipe line and wastewater industries for over a century

Channel: Petersen Products

Views: 35,156

Rating: 4.8762889 out of 5

Keywords: Hot Tap, Pipe Plug, 129 series, pipe plugs, pipe stopper, pipe stoppers, stopple, line stop, live tap, hot tapper

Id: yHXML-Itshs

Length: 1min 30sec (90 seconds)

Published: Thu Jan 10 2013