I will take you to see the secrets of using elephant glue to repair. or various uses inside the house to get good results, satisfactory, including testing the strength of the elephant glue as well, let's see how to stick it, how to stick it easily and strong as well. Hello, welcome . to Daddy's Tips channel. Let 's see how to fix it. Wood first We normally see three types of damage. One is broken or broken wood, two is damaged grooves on the wood, three is holes on the wood. The elephant glue I use is Aron Alpha brand . I will know this brand very well. Because he is the number one glue in Japan. His distinguishing feature is that it adheres quickly and dries quickly. There will be both water-based and gel-based formulas, which I will use differently. 3 grams of water-based glue will cost around 26 baht, while gel-based glue 3 will also cost around 35 baht. I, in the first case, is if the wood splits apart but the cracks are still connected. If in this case we can fix it by cleaning the surface thoroughly first. and then use elephant glue to pump water droplets onto the surface One drop of this, we can cover an area the size of a ten-baht coin. For water-based elephant glue, when we put the work pieces together, we won't move anymore. And then wait about 6 to 10 seconds. And then we can release our hands, which here is that we don't have to use a lot of glue. If it happens that we drip a lot of glue It will take longer than me. for repair A chair like this, I might use a gel formula instead. Because I can paste it vertically. Using the right amount of glue will make it easy to attach, fast and strong. As for if it is a crack on the wood or the compressed board. We can also use this water-based glue to drop into the groove. Because the water-based glue will have flowing properties. It fills in the groove and then we squeeze it together or we can use a heavy object over it. If the damage is a wide groove like this Then use wood dust together with elephant glue. By sprinkling wood dust to fill the groove first and then we use the water-based elephant glue to drop it into the groove. The water-based elephant glue will flow down and mix with the wood dust and will solidify in the groove. And after that, we can use sandpaper to scrub it off. and then we paint it down We will get a smooth surface. The same way we can do it with the screw holes on the wood as well. For example, I would drill a screw hole and then insert the screw into the wood. for my drawer like this If talking about alon alfa's elephant glue, water-based formula, it will have less viscosity than other brands of water-based elephant glue. The lower the viscosity, the easier it will be to do this job. because it will penetrate deeper than me After sanding it, it will get the floor. That is smooth with the surface of the wood. Most of the plastic utensils or toys, I would use a gel-based glue instead because the gel-based glue won't flow when we stick it. Down here, it will be at the intersection point, and then we will be able to join the pieces together. And if it happens that we splice it and it's still not in the position of the gel formula glue, it won't dry immediately, we can still move the workpiece straight first, then when we move the workpiece straight and then we hold it still. Still for about two minutes, the pieces will stick together. And using gel-based elephant glue is similar to using water-based elephant glue. is that we don't use a lot of glue and we just score at some points and that's enough, then we join together. The part that is used or that the toy looks like a stick. If it's broken up We will notice that the area where it breaks is very small. Therefore, we glue only this one, it may not be strong. Here I suggest that we should strengthen it. For example, the anchor here is the base of the lamp, I use a plastic rod to add it. where we use gel formula elephant glue In order to score it, then attach a plastic sheet to it. This time we stick to all four sides. And this time we have to wait a while for it to dry. We were able to use it. Here we can see that we can hammer it into the ground. And for the toys that are broken here It will be noticed that the surface area is very small. But here, there will be a difficult point, which is that the surface is uneven, so we will use cotton pads together with water-based elephant glue to strengthen it. This is some thin sheets, because when we put it down, the glue can penetrate through the workpiece. The cotton will then be attached to the workpiece and will make the cotton solid to strengthen another layer . like this bench We can plug the hole by using cloth tape to stick it on one side first. And then we use baking powder, baking soda, baking powder to fill the holes on one side. and then cut it to make it smooth and even And after that, we put water-based elephant glue into it and wait for it to harden. Then after it's completely hardened, we use sandpaper to polish it again. We will be able to close the hole. And it's quite strong as well. Notice that when we use it with flour, baking soda or cotton wool, we will change to use water-based elephant glue instead because the gel-based elephant glue will It has a high viscosity, it will be harder to mix with the material. \n And the third thing is to stick to rubber objects. When attaching shoes, the secret to sticking them strong is that we have to clean all the dust, oil stains, old glue stains first, and then we add a small amount of gel formula elephant glue. Yes, then we are opposite each other, which we can adhere to the same principle, which is the glue to the area, about the ten baht coin. Well, the position is still not straight, we are still able to Can move straight. After being straight, then we keep it still for about two minutes. In this case, it will be very convenient to repair the shoes urgently. No need to wait for the glue to dry twenty four modules. \n The fourth thing is to use a layer of glue to repair ceramics or stucco, such as a broken display plate or a broken cup holder. Must consider the surface that we will stick first, whether it is a smooth or rough surface, which if it is a smooth surface that can be joined together, we can use it as a water-based glue or a gel-based formula. Yes, I use a little glue. Points to the cutting point and then opposite the work pieces. The glue will dry very quickly, it will only take About five to thirty seconds. But if at the broken point is the point that supports the weight, we may leave it for a while, let us be sure first and then we can use it for real. As for if it's a stucco or a broken clay pot like this. We will notice that the surface of it is rough and it may be porous. If it was a surface like this, it would be more suitable for pumping gel glue. And it can be easily attached and strong as well. and then able to use the same method of sticking, in that we use a small amount of glue and attach it a little distance apart, for the experiment, I use gel-based elephant glue This is to attach a large plant pot. I can drop the glue on the surface. All of the surfaces will use one gel glue. Well, when I'm done splicing it in, I leave it for a while. About thirty minutes later. I came to try to test to see if the crack spot is strong or not. Here I noticed that I lifted the plant pot in the spot where it didn't break. Pick it up and try shaking it. At the broken point, it doesn't fall down. But I still wonder if it will be really strong or not. So I switched over and grabbed where it broke and tried to lift it up and down. The results showed that it was able to survive. It shows that it's strong and can be used right away. And if it is a statue, such as this statue of the frescoes, it used to be broken at the neck at this point before. The rain uses the elephant glue formula to repair it, which has been repaired for almost a year. And then through the sun and through the rain, it's still good. And the fifth thing is to use elephant glue to fix things that have metal parts, such as this dipper that I use to scoop cement. The handle comes off because the screw is rusty and then it's broken. In this case, we can fix it very easily by inserting the handle into the metal part and using elephant glue to pump the water into the joint groove. It's different. When we drop, we will notice that it will seep into the groove, then we will chase down the glue. It is all the welding points and then leave it for a while. Here, it will stick tightly and then very strong. Now I work assemble the wood. For example, I will connect the table like this. Yes, I will use these two angle irons to join with the wooden legs in order to attach Keep the wood, which if we use the method of shooting screws into it, we may be able to make the position of the wood move. In this way, we can use elephant glue to pump water to help. We can get it by which we can use glue. Water formula for sticking wood together first. Then after that, we put the angle steel to join and then use the elephant glue to pump the water to put it in. which here we use a small amount is enough Just holding the position for it to stay is enough. We can do this because elephant glue pumps oil to stick firmly and dry very quickly. And after that we can shoot screws as usual. Then after we fix the screws, we may use elephant glue to pump water to drop into the joint to increase strength again. When we stick to the position, it will do. Our work looks good and it's strong too. \n\n Next, I'll test the strength of the glue. I first tested it with water-based elephant glue. Two drops of elephants glue to the workpiece and then opposite the wall and then timer. For the elephant glue, we hold it still, with the strength. Lightly press on the work piece. From the test, it only takes about six seconds. After that, I can hang a water bottle of about three kilos or more. Next, I tested with the gel glue. I was a small amount of glue at the second point behind the work. With this gel formula, we can still move the workpiece, here I am constantly moving the workpiece to see when it dries. It appears that it is dry, it takes about one minute forty seconds. After that, I can hang a bottle of three kilograms or more as well. But the test results are not fixed. Depending on the surface, the amount of glue and the temperature at that place as well, from what I have tested, sometimes the gel-based glue takes only thirty-four seconds to stick firmly. After the glue dries, it will It's stuck, which I tried to test by hanging a bottle of water overnight and it's still stuck. In summary, elephant glue is a glue that sticks firmly and dries quickly. I have been using Aron Alpha for a long time because he is the number one glue in Japan and he is the first. First of all, I made gel-based elephant glue. Opening is easy, just twist the lid. No need to use a needle to poke at all for alon elephant glue. alphaสูตรน้ํานะครับก็จะใช้ได้ดีกับวัสดุผิวเรียบแล้วก็ช่องเล็กเล็กที่น้ําสามารถที่จะแทรกซึมเข้าไปได้ดีนะครับผมแล้วเราก็สามารถใช้ร่วมกับพวกฝุ่นแป้งเบกกิ้งโซดา ฝุ่นไม้ในการที่จะไปอุดร่องรอยความเสียหายต่างต่างนะครับแล้วเราก็สามารถที่จะขัดเรียบแล้วก็จะแต่งสีได้นะครับผมแล้วก็กาวช้าง alon alpha สูตรเจลมันก็จะใช้ง่ายไม่ซึมไม่ไหลเยิ้มนะครับแล้วก็สามารถที่จะขยับชิ้นงานได้ก่อนที่กาวจะแห้งแข็งตัวนะครับผมและด้วยความที่กาวมันไม่ไหลนะครับเราสามารถที่จะใช้ติดวัสดุกับผนังได้ง่ายนะครับผมจะเหมาะกับพื้นผิวขรุขระหรือว่าพื้นผิวที่มีรูพรุนนะครับซึ่งถ้าเกิดว่าเทียบราคากับกาวเจลยี่ห้ออื่นอื่นเนี้ยก็ถือว่าราคาไม่แพงนะครับและถ้าถามว่ากาว alon alfa เนี้ยจะหาได้จากไหนบ้างนะครับ แล้วก็จะหาได้จากร้าน Maxvalu Lawson108 SUN108 Fujisuper Foodland Tsuruha ร้านค้าทั่วไปแล้วก็ทางช่องทางออนไลน์นะครับ ซึ่งผมก็จะใส่ เอาไว้ที่ ใต้คลิป แล้วก็จะปักหมุดไว้ที่ ด้วยนะครับผม และถ้าเพื่อนเพื่อนชอบคลิปนี้ก็อย่าลืมกด กดแชร์กด ช่อง Daddy's Tips ด้วยนะครับ วันนี้ไปก่อนนะครับผม พบกันใหม่คลิปหน้านะครับ สวัสดีครับ
