woodturning - Swamp Stick Vase

the piece of swamp stick pretty interesting [Music] okay so we're gonna mix some of this alcohol ink in a stream as the color it's kind of a blue and put that in both of these and then some interference blue okay so my mold is just number two HDPE garbage anyways but I'm gonna use it for mold I cut the top off so that I can get that piece of wood in there and this is just to kind of hold it round so once it comes out to the cooker over there I'm gonna pour this should be pretty close and put some of this one in and then some of this one in and then it's more of that one in and then whatever else I can get in but anyways I said a stream on alcohol inks and interference blue total boat there's a 20% off promo code in the description below for anybody wanting to use a total boat products so far good stuff it's hot it's hot it's fine it's not really hot it's just kind of warm I know I had it in there I'm gonna do like so and then we're going to obviously keep it down so don't flow it out the plan is to pour this in and pressurize it and see how it goes probably need that stick up all the way to do I really like to aim your premium stuff look at that it's kind of cool Levine who here it goes I might not have enough I was guessing how much I had here then I probably got to make some more I won't force you to watch that trying to escape definitely gonna need some more a little bit anyways go meet you not much I am gonna need more they got me to about there okay now that I'm making an absolute mess I probably made too much but I'll put it in candy moves or something if I did better safe than sorry who didn't get the tape ready first I need your foot on that when you all hold that down for a second and one around the mall just in case those ones decide they don't like to stay there and into the pressure pot it's pretty heavy and hot already okay well I was worried with us how does this thing was that this was gonna be all over inside that bucket but it stayed in there and it looks pretty clear well I can't tell what is down in there looked like there might be some air there was a lot to pour so we'll see [Music] [Music] [Music] I've drilled my to 1/8 or 1/4 inch hole in here I'll just flip this around put the smaller Chuck on it so I can hold on to it here get the bottom shape now what I want to do is I want more of the voids that were in this swamp stick to come through and I kind of want it to look like a trees don't do wide at the base like the trunk and then come out like where the canopy would be so it's gonna be narrow in the center I'm hoping that more of the voids come out there's quite a few in there they can't see you know you can see this one here's one and then there's one there so that's what we're gonna do get just turn around and we'll be back in a second [Music] [Music] [Music] [Music] [Music] I really live with that you get our worse [Music] [Music] [Music] [Music] [Music] ok I got a couple spots I still got to get from the inside I'm not gonna be able to get that one but there there there there there I'm trying to get out I just changed over from the negative rake to the normal cutter because I think to negative rake is bouncing off the wood it's making things difficult [Music] okay we're gonna wipe this down with some denatured alcohol best I can yeah we'll give us some lacquer and then I'll mix up some resin a little bit in the bottom then we'll paint the edges and let it run down and seal this I don't know if you notice when I wipe this down with denatured alcohol it screwed it up dull to finish that's what you use to clean clean up this total boat and it actually didn't mess with the finish so I resented this again and here we are go so I'm gonna spray the inside once I'm gonna do two coats on the outside we'll let that dry right so I had to clean this up with lacquer thinner get all that lacquer off because none of it stuck apparently the oils in the Yorkshire grit or whatever effected that finish also so off that came now you can see I took it out of the inside also all the scratches in there those should go away when I seal this with resin so that it will hold water but the interference colors are kind of cool I like them mix up a little bit of resin all I need a little bit because I don't want to feel too much in down there paint all the surfaces all the way around then let it run back down to the bottom self leveling and that should hide all that all the scratches in that with the resin and then also seal this so that it will hold water okay see the little line hot right so that's where we're at and the plan is to pour some of this into layer make sure all surfaces are covered all the way up to the rim here and then set it down and leave it alone I don't want a whole lot in there but I need enough to do all this now it appears that they have covered it all well there you go there's how she turned out it didn't turn out too bad yeah it's the inside it's not really actually kind of like it of my swamp stick these I tried to make it look like a tree what you know how it is if you like it like it sure it if you have him subscribe she's crying I don't know what else to say I'm running out of ideas but I've come up with something I didn't sign it I don't really have a whole lot of space to sign on her so I didn't do it I ran into quite a few issues I got it done there it is I like it we'll put some pictures up and hopefully see you all next week [Music]

Channel: The Pohl Barn Productions

Views: 2,643,760

Rating: 4.8540516 out of 5

Keywords: wood turning, wood working, hybrid, bowl turning, resin, epoxy resin, epoxy vase, hybrid vase, mitten made, michigan maker, resin art, vase turning, wood and resin, total boat, jamestown distributors

Id: DHG1YdNFYbc

Length: 19min 26sec (1166 seconds)

Published: Thu Jan 24 2019

Reddit Comments

[u/fisher0111]

Ok buddy I’ve been watching your videos on YouTube and I have an idea I would absolutely love for you to do I’m only beginning and am learning as I go I’ve learned a ton from you and nickZ. Thank you for all your videos please send me a message if your up for one heck of a challenge.... well I think it would be an awesome piece to do