Using Phantom 4 RTK BaseStation to mark points.

rustle again with Arkansas drone solutions I'm outside with my phantom for RTK remote and base station and I've been marking a few points in my yard just to see how it works I will back up and show you how I connected and was able to mark points so the first thing you want to do is boot up both your remote and your base station you can see three three green dots here one flashing three flashing lights indicates that you're in the correct mode which is mode three you want to have three green lights to show you're connected and everything's good to go so on the remote you click on plan that will take you into walk with hands tilt and handheld RTK and you can see I have a fixed position I've already set it up so I'm good to go I know everything works you must have a Wi-Fi connection or a hotspot and be connected to your custom RTK network of our assuming you know how to do that if not you can contact me or watch a youtube video on how to connect with your customer key k network so what we want to do here is back up and show you how connected so I'm gonna dlink my base station so I'll click on the DJI I'll back out of that and click on the quadcopter symbol then DRT k and then I'm gonna click on the linking again and so it's gonna ask you you want to click on handheld stick walk with Network RT k ok it's gonna want to make sure you have a good connection to keep answering the questions then when it's ready to link what you want to do is go up here on your remote or your base station and press the far left button it will flash beep at you and turn green and then you know your link and you'll have a successful linking on your remote and then you just click then close that out then you want to click on handheld stick again just to make sure everything's good back out of it then you will go to plan on your remote then walk with handheld RTK and you can see I have a single message up here that needs to be fixed my accuracy says it's sixty two point seven inches right now so I'm going to have to wait a few minutes until I get a fixed position initially when I said it set it up it took me about 10 minutes to get to that fixed position don't know if it was my iPhone my hot spot not a good signal to the Coors network that I'm on or what it was but I'm going to wait for it to come up and then I'll get back to you ok I'm back I forgot one step so since I disconnected my base station and basically reset everything we'll have to go in and tell it to connect to my custom Network again so you click on the RTK and then service type you want custom network and you can see that I have network RTK successful and you can see my information on both screens here from the custom network and the entailed RTK and I've got a fixed position so I'm ready to mark 4 ok I'm going to start my points let me start over here let me cancel that so I'm gonna click on set point current coordinate I'm gonna click on the screen just for convenience we'll say p1 position 1 and save it now I'm ready to move to the second point so we'll walk over here again you can hit situ or just put the button on the screen and we call it P to save it then I'll move up let's zoom down a little bit see to position three and you can name it whatever you need to and then I'll move over and do my fourth position okay just gave me a message that my precision precision is accuracies off that must be due to my network signal from my iphone I'm in a bad cell area so I'm gonna mark my fourth position I lost my accuracy for a second then I got my signal back so I'm going to click on c2 again name it position four save now I want to save the whole project I'm going to call it yard to okay so I've saved those positions you can see them on the map it worked like it's supposed to so I will show you how to export those points here in a minute okay so now you have your points saved you have a SD card slot on the side of your phantom for RTK remote you'll need to have a SD card in it then you click on the three lines on your screen go down to the bottom where it shows a picture of SD card you'll have the option to export and held the RTK point task it'll click on it and then there's yard yard - so I'm gonna export it and it saves it to your SD card you take it out and save it as a text file and you can use it from there that is how you export

Channel: Arkansas Drone Solutions

Views: 11,458

Rating: 5 out of 5

Keywords: Arkansas Drone Solutions, DJI Phantom 4 RTK Dongle, ZTE MF833V

Id: TB6n4H-EFPk

Length: 6min 10sec (370 seconds)

Published: Wed Jan 15 2020