TRY THIS HACK IF YOUR BLADES WONT COME ON!

what's up guys more medic one here and how are y'all doing today let me know in the comments how hot it is where you're at unseasonably hot here for almost the first of september i've got sweat rolling in my eyes my eyes are burning but anyway hey i'm not at one of my facilities and uh i want to show you a hack now i say hack this does not destroy anything because the part you're gonna replace is the part that we're gonna hack what i've got and let me show you is a john deere z track it's a 925 with the seven iron 60 inch deck and let me climb up here and the issue is the blades won't come on whenever you engage it so let's get it cranked up [Music] as we can tell our blades aren't coming on nine times out of ten it's going to be your blade clutch but your your switch for the blade clutch and uh let me show you a little hack they can drill you a hole right in the center get you a little bit of wd-40 and squirt right down in that hole that water displacer formula 40 is gonna go down into that switch and the terminals and it's going to lubricate everything a little bit i know this is not a lubricant it's more of a water displacer but check this out we're going to get the compressed air and blow that out and i guarantee it's going to work all right so now when we did that i can feel the detent and that switch is working a whole lot better what happens is as dirt grass debris gets all up in this switch and the detent doesn't work and it won't allow the switch to fully pull on so i mean it needs a new switch but let's just try it and see if it did any good [Laughter] [Music] [Laughter] [Music] all right guys hey if you found this hack useful let me know and uh guys we'll catch you on the next one have a great day

Channel: THEMOWERMEDIC1

Views: 34,961

Keywords:

Id: 1Wg7paRqV8A

Length: 3min 49sec (229 seconds)

Published: Tue Aug 31 2021