Hello, friends. In 17, I hung the door
in his forest hut that build in a deaf deserted
forest in northern Karelian rocks and it's time
tell about its production in more detail. The design of the door on the heels
quite traditional but despite being on your
Main channel I try publish videos from the original
idea this door seemed to me worthy of the main channel. A little explanation about
my project is a hut for those for the first time on my
channel - from the 14th year in your I arrange summer vacation
parking in the northern deaf forest where there are no roads and people. Summer north white nights
and for such a vacation you can a lot of time. And in five years I managed something. Made a massive fire
wood furniture from trunks fallen trees, cleared
and flooded creek even organized wooden ladder in the dam
from the aspen fork, for rain protection collected
hybrid tent table and bed of poles and PET tapes of
bottles for organizing all-season wooden warehouse
crafts and blanks built dome of the twigs of mountain ash,
bird cherry and stretch film. Cleared from the windfall
territory built from him a hut. The trees were gigantic,
because a log house of such irrational large logs. Logs laid in okhlop
and fastened with dowels. The roof represents
crate of massive block waterproofing and insulation
from turf. And of course it was done
a lot of things that are not horrible in frame ... although in frame
a lot and links to these projects I will leave in the description for this
video. But back to the door saga
on the thrust bearings. Back in the 15th year in the manufacture
I prepared the first crown bore
and the second hole in the lintel I drilled already the 16th year
To install the door all ready, you have to make the door. So need boards. I sawed the boards back in the 15th
year You could see them in my
video about the simplest sawmill from chainsaw two boards
and screws, but the length of the tire I was not allowed then
make wide choors. I want to make a door of
two huge scaffolds for if you make a door of three
scam, the mating area will be three times more
and as a result, work will be three times more. So I need more
wide choors. To solve this problem
i bought a more powerful saw with the extended tire made
forest gripe and engaged regrinding chain saw
from 30 to 10 degrees. This is important for manufacturers.
saws recommend sawing logs along a chain with an angle
attacks from 5 to 10 degrees. In addition, I prepared in advance
for new more powerful saws fixture by
type Logosol or ALASKAN MKIII. But with a trial cut
saw the logs on the boards I realized that by this device I
scaffolding of the desired width is not I will drink Even when trying to dissolve
on the boards the log is thirty centimeters in diameter
Saw MC260 just did not cope. Once with a chainsaw attachment
work is not done, it means head off No sooner said than done. It's time to go, but to
it was easier to carry a tool supplies, cameras and tripods
I made almost in good time traditional ponyagu of
pine riveting rod bird cherry and all the same pet
ribbons from a plastic bottle. Taking the opportunity yet
just recommend to get so ponyagoy. Last year I noticed
half a kilometer from the parking lot century old stump
pines, then we go there way. I collected the tool in my
Pyagu and went to look for the coveted stump. Drop vertically standing
stump is not felling trees I can easily cope with it
even me. In the place where the hurricane broke
century pine and at the root wood of course rotted,
but the rest of the tree quite dry and wood
very very dense. I dropped the stump by all the rules
first from the side where decided to drop the barrel sawed
wedge and then from the opposite sides but taller 100 millimeters
on the trunk, made a drink almost to the middle of the trunk. Well, dropping a stump
In this propil a wedge. This is one of the most common.
and safe ways to dump not a problem tree. Trees with asymmetric
crown, inclined or tense trees fall harder. Stump I dropped on in advance
prepared lags. Prepare them in advance
it was important for the log though and dry but heavy and lift
I wouldn't have it all happened. In my hut two door
opening, which means you need to prepare material on two doors,
so I carved out of it hemp two blocks on boards
long at the door with a decent allowance. A lot - not enough, and shorten
always easier to put on. While I was preparing the site,
and marked on the hemp cuts several times let
rain and I protected from moisture wood with glassine. I was very surprised by New
saw that and before that sawed to the floor strength, and now
did begin to stall. But you have to do it, therefore
i secured my homemade large bracket churbak on
logs and began to cut those most non woody forest
resources about which made changes to article 32, 33
Forest Code and which for some reason everyone calls
brushwood. On the topic of collection permission
brushwood much speculation and misinformation and maybe
I'll write about this article or take a video. Dry wood
northern pine has its own the name is kelo. And I must admit that such
deserved wood highly appreciated. First wood is northern
the pines themselves are very dense and firm. Besides wood kelo
dried hard and reset internal stresses
over the years and in natural conditions change summer
heat and winter cold. Logs and choors from Kelo not
burst at dying give minimal shrinkage
and when processing oil glow pleasant honey
color. The kelo core is very hard
and always bright but noticeable darker living wood
and sapwood has gray pigment. This characteristic color gave
wood sapwood fungus, who lived in it while wood
not completely dried up. Many have a prejudice
against wood painted so fungus however practice
showed that in addition to decorative effect, dead fungus
no wood on kelo no action. Many, including me,
even like striped pattern on the board kelo. We immediately see that the board is gray
ancient and tree for its life has seen a lot. By the way, all the resin in wood
Kelo crystallized and because the instrument
it has to be processed whet more often. Despite all the difficulties
with a mc 260 saw with a task i still managed. Cut with the tip of the saw flywheel
movements are much more productive than with the nozzle. This confirms the fact
that on the cut narrow board using the nozzle on the tire
it took me three full gas tanks, and to cut one wide
heels with their toes method i spent in two
times less fuel and three times less time. But the topic of cutting chainsaw
logs on the boards too extensive and apparently this
the topic will have to mount separate video with all
tricks and secrets of this interesting activities. The last slab finished
can visually check its geometry and if the workpiece
control department will be held quality, proceed to
transfer the scaffold closer to the hut. It seems to me that geometry
planes and roughness in tolerance, then you can
put a glove on your shoulder put the block on top
and go. How do you guess by
ways i was happy that wood Kelo is dry and relatively
easy Paradox - light wood,
and the scaffold is heavy. I was also warmed by the thought
about how lucky I was that stump was practically
on the path that I laid in past years and i don't
need to climb through the rocks and wade through the thicket. This is a great luck on the road.
cheered me up and gave strength. If I took the first board
on the shoulder then the rest i carried putting them on the bow
your ponyaga It is very comfortable, weight evenly
distributed over the shoulders and carry such a complex load
even cross country very comfortably. Ponyaga me in the next
once pleased! I planned the second block
dissolve on boards for second door later but plans
It was not destined to come true. More chainsaw in the morning
did not start. Look at her CPG. In the service I was told that
I poured into the saw wrong gasoline but explain why
on the same gasoline regularly my work worked in parallel
180 saw in the service I do not could Now on the saw MC 260 burned
the second CPG and I conclude that it’s definitely not gasoline
maybe the point is that Saw made in Brazil. But get upset of time
no, you need to do a workbench and even the whole forest workshop. I made a workbench from an inverted
with the root of the tree. If you remember, I sawed
from it a croaker and two boards and got a steady horizontal
plane. Wonderful workbench. Over the workbench pulled awning
who gave me Olya and got an all-weather workshop. In the manufacture of the door
on the heels, first In fact, I sawed out the dippers themselves. This is a rational decision
so i will get rid of allowances and I will not continue to roll
in the forest workshop extra weight on the already heavy
bloody. For this, I have marked on
blackboard the contours of the door and myself thrust bearing. Markup took me
a lot of time to go wrong I could not afford
for spare scaffold at me No, and without a work saw to take
her nowhere. Made strictly according to the markup
several cuts and chipped on the fibers all the excess. And of course I corrected the contours.
heels with chisel. Scaffold with thrust bearings has become
noticeably lighter. On the board are two thrust bearings,
so this procedure had to repeat twice. With the second board, it's simple,
there is no thrust bearing on it, so you can saw off this
board immediately to size of height door but with threshold
and the porch that I did two years ago. In the 17th year, I'm with me in the forest
took a plane. Joiner's planer it
can not be named, but for carpentry works it is quite suitable. To align the plate
would need manual jointer but he is very cumbersome
and heavy because this since I didn't take it with me. It seems to me that for the forest
huts come off the board processed even sherhebel. Notice board
pine kelo quite dry, natural moisture board
so just do not otstrogaesh plane I think planing with a plane
the most carpentry of all joinery work. You can now have a rectangular
in the cross section of the thrust bearing round out verge and give it shape
cylinder and help me in this layout and all that
same hacksaw and chisel with with a hammer. Note the thrust bearings
I have a diameter of 52 millimeters and the board is at least 80 millimeters,
and in order to closed the door did not see through even when
this door opened as far as possible the thrust bearing
need to move closely to the inner edge of the door
and of course it is important to arrange Both thrust bearings are symmetrical. Thrust bearings prepared
you can proceed to the organization connection of two blocks. I decided to seal the two docks
in the traditional way - on two cross-beams. And for greater reliability
cross beams I decided to embed in the body of the block in swallow
tail. Easy to say yes not fast
to do. To do this, cut out
and plan two crossbars with isosceles geometry
trapezium in cross section and whole four grooves in two boards
with the same section. In the 18th year I forged myself
big carpenter chisel. She weighs more than a kilogram,
cutting edge width it is more than 60 mm and long
she is more than half a meter maybe You saw her on my instagram
or on the live channel. So, this is a chisel I
would choose a groove under the swallow tail is three times faster
and the surface would be treated cleaner, but in the 17th year I had to
do a little carpentry chisel Notice the slanting
sides of the trapezoid at the swallow's the tail I did not form
chisel, and immediately saw. For this I did
not vertically and at 90 degrees to the surface of the board, and under
acute angle. This cut is usually done
with the saw, but as showed practice, and the usual
Saw such a groove choose not difficult. If you listen,
you will hear raindrops on the awning. It's raining outside, but mine
in the workshop is dry and comfortable, can proceed to primary
fitting the groove to the crossbar. I used the lapping method
and the spots served as lighthouses from the embers of the fire. This way you can achieve
maximum tight connection. It is only necessary to drive systematically
groove cross bar deeper and deeper and cut off from the surface
groove stains from the embers. It is quite painstaking
partly meditative discount, requiring decent sharpening
tool. And what is characteristic of this work
it was not necessary to do. So tight fit
cross stitching street door boards not
obligatory however hunting more bondage and if I like that
lesson for something like that would not do everything so that
then did not have to redo it. Especially on the street goes
rain that bothers me do other things. When the chisel bored me,
I picked up a plane and gave one of the faces
scaffolding with cylindrical bearings form. It is necessary that the door
tight, without gaps got up to your seat
closed and while turning freely
around its axis. This is a crucial moment
if you do too much, then there will be a gap, and if
leave corners and ledges then the door will not open. The rain is over, you can
try on the finished sash in the doorway. So it's time to carry blanks
door to the hut. Subjective sensations
Plaha during processing lost half of your
weight. At least carry them
it became twice easier. I tried on the sash a few
once and customized and porch and sash many times but
it was a nice job. I have not seen live before
doors on the heel pads and I myself was curious
what happens even intermediate result me cool
pleased. Each time removing and installing
I liked the sash and fitting the design itself
more and more. In the massive door on the heels
reliability is felt and thoroughness. When you see the door on the heels
immediately realize that in the hut people are living with wood, not
any idiot In order to fully
try on the hinge on the heels should be raised
lintel, and yet on lintel lies okhlopen and the whole roof. And my roof is very
and very heavy. Crate from sawn
in half logs plus thermal insulation from wet sod transform
this task in rigging work As you already understood, this
I solved the problem with set of wedges. Wedges need strong because
I carved them out of the most resinous knots that are just
could find. The stronger and harder the wedge,
the more weight that they can be raised. But I probably already tired you
your comments because I suggest to look intermediate
fitting in silence. Frankly, I'm so
the little sash pleased, I even thought why
would not make the second door of the two wings, as in the saloon
from westerns ... Friends want to give small
explanations why in the hut two doors and why doors
open outwards. Indeed in the locality
where overnight can satiate snow meter, doors often
make them open inside. Otherwise there is a risk that the door
snowing and she doesn't will open from the inside. And be locked in your
home until spring nobody wants. But my door opens
out how do you think why? A quick tip by
fire safety regulations the doors must come off
out but I was guided other considerations. Two doors in this hut because
that these doors are planned as exits to balconies. One door to the south balcony
the second to the north. I just lift the hut
and put the bottom six more crowns and then the present
izba will be an attic. Of course this is a joke, or not? Now what can we do?
to door assembly by others words to compound two
block in a single design. The construction should not
be no gaps mean need to organize
sheet piling. It is for these purposes that I
took a sheet pouch with him. With this tool
you can easily and quickly choose neat longitudinal
grooves in the ends of two boards. I hold the tongue in my hands
first time and work them I liked it very much,
even more than a plane. The structure of the groove
very similar to a plane, only the knife dowel much
already plus the sheet pp is side stop that together
with sole provides reliable positioning
knife on the board. If you do not change the setting
side stop and plank two grooves in two different boards,
then the grooves will inevitably turn out Equally away from the side
face pressed side stop In the selected groove, you need to score
lamellas, in this case these are such flat dowels. Lamels I made from homemade
shingles. Shingles it's poked out of the log
small board this is shingles. With shackle fasteners on my
improvised workbench from the log I was tormented. When I planned yet
in the winter this operation then represented her myself differently, but in place
I began to experience difficulties. Shingle thin and resist
it doesn't work and in the screw or nail rest
I do not want him as in such I'll definitely ruin the case
scraper. I feel sorry for the scraper
then to forge him off it took me too much
time and effort so to risk. Clamp with screed
with a ratchet me at all I gave and I firmly decided
what will I gather next year this carpentry fixture
under the name Shaving Horse. His Russian name is to me
I do not know, so I call his horse is pedal. If you know more appropriate
name write it please in the comments. If my horse is pedal
you are interested, then I I will mount about it separate
video. I can only say that in the 17th
I have this horse very much was missing. But back to the door on the thrust bearings. Make the right amount
lamellae turned out to be harder and longer than I thought. So having processed shingles
braille and filed it on the lamella I prepared
all design elements doors to assembly. It remains only to collect all
together. It is necessary to score in the slots from under
the tongue of the lamella, and in the groove dovetail cross member. By and large this is the moment.
truths if I got it wrong somewhere then either cross warp
in the slots either do not match grooves and slats and rally
the boards fail and then all have to redo
re-saw the log on boards to cut out thrust bearings
and further on the list. But I was lucky and all the grooves
appeared in their places and the door was able to assemble
without gaps. It remains to fix the cross
on wooden dowels, plan not enough marks on the plane
clean hands and tools and of course trim the door
on height. Log cabin with seasonal changes
humidity breathes and washes still sit down Therefore, it is necessary above and below
leave a small door the gap - the so-called deformation
gap. It remains to repeat
already known actions - lift the lintel,
insert thrust bearings into the grooves and lower the lintel on
a place. All door installed and
no bear inside her will not squeeze out. Yes, and I have a round window
also bear resistant. It seems to me that all these
actions no longer require explanations, therefore, shut up
and leave you alone with sounds of wildlife
and working tool. You had a lawyer Egorov,
thank you for sharing mine video with friends and let
good people look good video.
