TOP 10 BEST SCOOTER PRANKS FOR FRIENDS!

Truth be told it actually has been a little bit since we've been here. We've been so limited with the rain lately that Neither woz. Nor I could really go outside and do really anything because I want to be able to pump out some quality videos So because of that firsthand, I'd like to apologize for not posting for the last few days Especially to a lot of new subscribers you guys know that I don't do that But it's been kind of a letdown lately with the whole weather situation, especially because I live in California not right Although today's video is going to be definitely eventful because we are without a doubt we're gonna go ride today But we figured that we would start the day off the right way Okay, so we're over here at the zone today now what we're gonna be doing today is a little bit different than some of the things that we've done in the past is something That's kind of informational But not necessarily in a good way for everybody What we're gonna be doing is room you showing you guys all kinds of different pranks that you guys can pull on your friends now My target is here. So we just be kind of quiet today Before we move on to all that stuff I have a clip that I've been trying to get on the roll in like the big side of the rollin For the past like 15 minutes, so we're gonna take this all in to the skate park and see if I can get it It's gonna be a 70 up to the top of the big roll Wow, well the scary things happen all week, let's not do that again Oh All right mission accomplished now we got to go find Steve scoot And destroy it without actually destroying it. Oh, I'm glad that's over though. All right So what we're gonna be talking about are a few pranks that you guys can do to your friends scooters Now these are all pretty friendly pranks that I'm doing all my best friend Steve I know he's not gonna be super mad at me when I do them Because they're not super harmful If you guys aren't gonna take any of the ones that could actually affect your buddy's scooter in the long run make sure that you either have spare parts for him or something Prank number one a lot of people in the scooter community ride Plastic barns one prank that you can do to your friends is you can remove that Plastic bar end and show up a whole bunch of bolts on the inside of their bars any bolt that you use will work I'm personally gonna use some clamp bolts that I found inside of the workshop here at scooters own Basically what this is gonna do is it's gonna create a super-loud tingey kind of noise that nobody likes to hear on their scooter although if you're gonna do this prank make sure that the barns are in working condition if you take the bar out and they snap you're gonna Be in trouble and your friends probably not gonna be too happy Prank number two that you can do on some of your other scooter friends Actually might make them kind of happy as long as you let them keep where your actual ingredient is this prank Involves any kind of coin that you can find the idea is simple all you have to do for this prank is take your friends Bars off of their scooter and take one coin you can put multiple coins in the bars if you want But I personally have found that the least amount of coins is a little bit better because it doesn't make a huge amount of noise And it's a sound that might sound familiar if you have like a wheel loose or something So it actually does get your friends scratching their head once you take your friends bars off their scooter All you have to do is throw this penny or quarter or nickel or dime whatever you decide to use Inside of the actual down tube of the bar Once the coin is inside of the bars put the bars back on the scooter tighten everything up just like nothing ever happened When you drop the scooter It'll sound like they have a clamp bolt wheel bolt something like that loose and they will have no idea what to do Until you tell them that you put this coin inside of their bars Now the next prank is something that we pretty much have all done to somebody but for those of you that have not done this To somebody here you go. It's a pretty simple one all that. This prank is is changing your buddy's alignment Completely off now before you do this one, please Make sure that this person is not about to drop into a ramp or something like that It's all good. If you guys are doing it and you're just riding flat or something in your front yard Probably not the best idea if you're gonna do it when you guys are at the skate park But if you are gonna do it just make sure that your boy is not about to go do something crazy pretty simple Everybody knows you need an Allen wrench either a five or a six depending on what clamp that this person has Loosen that clamp up you guys can put it to 90 degrees You can put it to 45 degrees as much as you guys want to do it You can even just put it off a little tiny bit Just to make it to where there kind of ski whomp you wouldn't they're riding either way This is a very very friendly prank that you can do on your friends And usually they don't get too upset when you actually do this because it's an easy fix But again, make sure that you're not gonna do it to somebody it's at the skate park and about to do something really really gnarly or Stupid because then you look like a jerk and pranks are never fun if you look like the jerk Prank number four has to do with grips. Now. This prank is only gonna work for a certain grips it might not work for every single one, but Regardless it would be funny. This one's a pretty harmless prank So this is not something you have to like wash out for it's not gonna matter if you guys are in a skate park riding something in particular Sometimes they might not even notice it so that might work out for both of you guys Grips that this might work out pretty well on our grips that have large ends. For example the NV TPR grips This grip is pretty close on this side as it is to this side Although this side does have a small incline as you can see right here. So Usually people would ride this particular grip with a small side on the inside of their hand So you take the grip and you take it off of their bars and you flip it over So this way they have a small incline on their index finger some people like it A lot of people don't it could be something funny It could be something that people might not notice at all and sometime that's even funnier Although if you are doing this prank, it might take a little bit of work You might need some water or an air compressor to get your grips off and don't forget if your boy does get pissed You're the one that has to put the ghost back on so don't torture yourself Next prank on the list takes a little bit of work, but it's definitely worth it ever be risers decks right side up Obviously, but have you ever tried to write a deck upside down? It is possible it is annoying but it works this doesn't take as long as you would think but it is a little bit more time-consuming than turning grips around for this prank What you're gonna do is you're gonna start off by ticking off the entire front end of the scoop That includes the fork the head set the bars and the compression. You're gonna flip everything on the front end upside down You're gonna put everything back in exactly as you did when it was right-side up So be careful not to put the headset bearings and upside down. Otherwise, it's gonna ruin the bearings Once you've got the front end put on completely correctly Just slide the bars on exactly like you would as if it were right-side up for the rear end of the scoot you're gonna have to take the brake off or you can leave it on if You know for a fact that you guys aren't gonna ride it if you're gonna leave that brake on and you do decide to ride It it's gonna scrape the top of the brake. It's gonna ruin it So make sure if you want this to be a full-on pranking you want the person to actually ride the skuas a joke Gotta take that break off this prank almost always puts a smile on somebody's face But remember again If you're pulling the prank and your buddy doesn't get a kick out of it You other person that has to put it all back together exactly how you got it So if it was down before and when you put it all back together, it is not dialed tight Whatever you want to call it. You done goofed. You gotta fix it. See your responsibility. You're the prankster Don't be an annoying prankster be a good one Next Frank is one that does get looked over a lot even though it is done a lot at the same time It's pretty simple Everybody loves writing their name on their friends scooters Whether it's on the bars, whether it's on the grip tape whether it's on the grips whether it's on the deck wheels Whatever it is people love doing it, and I'm in that class. I'm not excluding myself at all I'm definitely a part of that group me personally I like doing it where it's gonna be seen the most and I usually do it with a sharpie because it's a little tough to Get off it's not impossible to get off. It's definitely not fully permanent when it comes to doing it on something metal But again, it's something that's annoying and it's something that's funny. You guys can also draw all kinds of pictures if you want I don't really try to get too graphic with mine personally, but I know a lot of people like to draw elephants It's a crappy elephant I know next one up on the list is something that I can't actually show you on Steve's scooter because he doesn't actually Run one of these but it has to do with a headset cap This little prank is probably not something that your friends are gonna notice very quickly But maybe way later on down the line when everybody's just kind of sitting down on the ledge or something like that hanging out It's something that they might look down and realize that something is not right for this prank All you're gonna do is slide the bars off the scooter remove the hits that cap and simply turn it upside down and push it back on to the actual fork or Shim that its installed on although when you are installing the bars make sure you don't push the clamp down super super hard on the bottom of the headset cap reason being it has a Small lip on the outside of the headset cap and if that headset cap lit is bent you're gonna have a problem Next prank is something that maybe not everybody wants to do but it's something that I would do to Steve because I have more bars to give him if I Decide to do it so if you guys are gonna do this prank, please make sure that you're even you're either buying this person new bars or Well, it's pretty much it. Make sure you buy them new bars. Maybe they have a birthday coming up or something like that You've already planned on getting the new ones that is when this prank is acceptable If you are not doing that don't do this because it's pretty jacked up. Let's take you back here come with me This prank is gonna miniaturize your friends scooter now again, I can't stress this enough Don't do this unless you have more bars that are either better or exactly the same as the ones that you're giving your friend now basically What you're gonna do for this is it's pretty self-explanatory makes you guys have a saw of some sort whether it's a chop saw or a hacksaw or something along the lines of that to where you can actually cut the bars both width and Height and just miniaturize your friends scooter Now these bars in particular are titanium bars, so they are very expensive. But I have more titanium bars that I could give Steve It's up to you how much you want to actually do this if you want to do it a lot Awesome, if you want to just do it a little bit just mess with them a little bit It's up to you. And if you decide to tell your friends why right away also up to you, but again, Don't do it. Unless you have more bars for your boy or girl To go now This one is a pretty simple one very it's very close to when you were putting the grips upside down slash backwards Whatever you want to call it on your friend scooter But this time we're gonna put both grips on the very inside of the scooter Now this is something that could be very very inconvenient If you're at a skate park or if you're at a place that essentially just doesn't have the correct ingredients Materials whatever you want to call that to put the grips back outside of the actual bar. So again you're doing this prank It's something you have to fix to do something that actually makes sense, but I got an air compressor so Steve Your bars are now the same width as mine If you have an air compressor, this is something that can be fixed very very quickly is you have a bottle of water It's also something that you can use to make this a very very easy fix if you do decide to do it it shouldn't take you more than was How long does that take me to actually get the grips on and fix them total of like what 20 seconds? Yeah So, yeah, if that so again, it's a friendly one Although the next one not so friendly we saved the absolute best for last I've worked at a scooter store for a very long time where I did and I did have a couple of run-ins with This problem in particular and let me tell you something even if somebody is not even my scooter It was annoying when they walked in and told me what the issue was I was for lack of a better word pissed Everybody knows that putting grips on you use an air compressor you use hairspray You can use water you can even use spit if you need to. Sometimes you have to let that stuff dry although One thing that you can put on your friend's scooter that will make it slippery for pretty much forever so you guys can go grab a bottle of dish soap or This stuff right here if you grab wd-40 and you spray it in there. Oh my god It's so slippery for a long long time. Does it dry eventually? Yes soap is probably something it's gonna be a little bit slippery or for a little bit longer If you do decide to go with soap I Recommend either usually dawn. They don't have dawn soap here or some kind of like a hand soap like soft soap or something like that This this is like some kind of hand cleaner that they have here Although this stuff has like kind of like some gritty stuff in there. So it might not work quite as well So if you guys have hand soap or something like that at your house Just put some of that on the inside of your friends grips and watch how everything spins like crazy It'll spin literally better than my headset which has a lot of grease on the inside Oh, you can put grease in there grease never dries you're screwed. Well put grease in there. That's up to you But again, if you do any of these pranks you have to fix it, so don't be a bad prankster don't be the one that straight up annoying and just not fun to mess around with and Don't basically shoot yourself in the foot and lose a friend again This is something that you're gonna want to pick the right person to do these kinds of things with Somebody that has a good sense of humor and submit it doesn't get mad super easily Steve He's got a great sense of humor, and he doesn't get mad really at all So I could do all this stuff to his scooter if I wanted to and we would totally still be friends So don't lose your friends over these it's all for fun and games. And if you are the one that gets pranked Be a good prank twofer. So thank you guys so much for watching Hope you guys enjoyed today's video If you guys found any interest in any of these pranks that I've told you about today Please let me know in the comments below what your favorite one was, but until next time we're out here. Thanks again

Channel: Raymond Warner

Views: 520,724

Rating: 4.8284025 out of 5

Keywords: raymond warner, raymond, warner, sports, action sports, scooter, scooters, rdub, TOP 10 BEST SCOOTER PRANKS FOR FRIENDS, scooter pranks, prank, pranks, pranks 2019, best pranks, prankster, scooter parts, best prank, pranking girls, pranking boys, pranking, skatepark, skate park, skate, scooter skatepark, skatepark scooter, scooter fail, scooter fails, fail, fails, 720, roll in, scooter zone, r dub, scooter edit, scooter video, bike videos, kickless, gh5, friends, friendly, friend pranks

Id: cRzBC-IqQOQ

Length: 16min 38sec (998 seconds)

Published: Wed Feb 06 2019