TimberTech Cortex® Hidden Fastening System Install

cortex hidden fastening system is designed exclusively for timber tech deck planks timber tech cortex provides a discreet hidden fastening solution for perimeter boards and stairs pair timber Tech's cortex with timber Tech's concealed lock hidden fasteners for complete fastener free finish cortex provides a perfect color match to any timber tag decking cortex hidden fastening system comes with 224 screws 300 plugs and 2 setting tools everything needed for approximately 100 linear feet of decking pre-drill the deck plank with a 5/32 inch drill bit to create the proper pilot hole pre drilling is required when installing cortex fasteners less than one inch from the end and one inch from the edge of a timber tech deck plank next load the setting tool into the drill chuck drive screws at a medium to high speed until the setting tool disengages at the proper level below the deck surface installed to deck screws into decking at each joist maximum spacing between each row of screws should not exceed 16 inches on center the cord hole must be free of debris or moisture place plugs into the cord hole use a smooth hammer head to gently tap flush with the deck surface with cortex your fastener free finish is now complete

Channel: TimberTech

Views: 64,715

Rating: 4.8947368 out of 5

Keywords: Cortex, Final, 720p, TimberTech, Decking, Fasteners

Id: aJF7J5IFn64

Length: 1min 51sec (111 seconds)

Published: Thu Jan 17 2013