This Saw will put Milwaukee out of business!

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
we're northern we settled on the clutch and Dillon our point about it a clutch let's pray on soft Oh so we could have went several ways with this but I think this is gonna fit our needs really well that's what it is alright guys we're back to the middle I got Dale Derry with me from built something cool and I'm gonna be doing the tool unboxing kind of a rare thing but we got a tool it's in a box we're going to take it out of the box there's really something to be said for a song that actually comes preassembled I really like this it's good to go we don't have to pull legs on it or worry about flimsy legs a table top setup and that's really gonna be nice for being portable I can move it to the blacksmith shop I can move it over here I don't have to take my steel back and forth depending on where I'm working so being a small portable bandsaw it's a big thumbs up right there so we have a frame lock right here we can rotate the saw down and we can lock into place and then it'll snow you can carry it around wherever you want we pull the frame lock out say you want to make a 45-degree cut all you do is just ratchet this little guy give her a spin you can go anywhere from 45 degrees all the way back down to zero lock her back down into place and you're good to go your on and off switches right here and then you have a speed controller right next to that there's a handle on here and it has a trigger I just tied that up and I think I'm gonna go ahead and just get this whole thing out of the way maybe make a different handle pull this guy up and you can see we have a nice cast of ice here as opposed to a sheet metal of ice your cheaper sheet metal vices will kind of allow a little bit of flex and that's kind of tough on the blades kind of tough on you know it doesn't really cut as good the guides here are roller bearings I really like that as you can see we have roller bearings on the top as well this is the blade it came with it's a good blade it'll work but multi-pitch blade is gonna do a little better I think we picked one up for 20 bucks we'll see how long she lasts [Music] [Applause] [Music] you know what I'm pretty happy with this purchase so far everything seems great on it let's get her put back together and we're gonna fabricate something for it okay I'm a huge proponent of living the tool do the job so I wasn't putting a great deal of pressure on there I did apply a little bit of pressure because you can on a bandsaw but I'm not putting a lot of down feed pressure on there it's the weight of that plus maybe two or three pounds real light stuff you know I like to keep my blades it last longer that way and I got extra ten seconds to cut I'm happy with this saw nice clean cut and now we're gonna get to work and we're going to set it up to where it can be a really cool vertical bandsaw [Music] [Music] all right I'm getting ready to break out my fireball tool fixture and show you guys how that works but before I do that I'm gonna sprayed it with the whoop I'm gonna spray it I'm gonna spray it with the weld clean HD what that's gonna do it's gonna keep all those little boogers and all them little weld beads from sticking to this you know guys your tools aren't steep cover them protect them and of course your welder you want to keep replacing you know nozzles and stuff like that then don't use this but if you want it to work go ahead and throw some nozzle dip on there this stuff is nozzle dated HD works fantastic I wouldn't be on my channel if I didn't think it was the best so brand new welder we've run a ton of stuff through here let's see if we get her to focus she looks dirty she looks nasty one little wipe look how clean that is let's pop the top off let's look inside see what we're dealing with in there there you go look at that look how nasty that looks all right like just terrible it's kind of what you used to see him but maybe even worse used to see little boogers in there watch this - wipes guys that is completely clean that splatter can kind of get in there but it just falls out look I mean you know if you were crazy enough you can eat off that one little dip guys and you're protected so now let's fix drew we know we're gonna be welding on this side and we'll just give it a little spray we don't want a bunch of stuff sticking to our table there we go you guys maybe we don't want a bunch of babies on the side of this fine just put a little bit on there stick to it we're gonna put the fireball tool down and line her up well that's perfect I mean you just can't beat that come in take your clamp just throw your clamp on pull this clamp on alright look at your part make sure everything's flat to the table I know looking at it I need to come this way a touch will then drive this this direction flat to the table Bob's your uncle we can weld so here you go look at this we've got well bb's on here look there right there you just wipe them off fixture saved nothing stuck to the table Thank You CRC couldn't find a square so I just cut a bigger square down short we're lining up our table up here we were doing it up top but we're you know we're feeling and phatal in a little bit so yeah we're square to the blade this direction we're still off this way because I have this set a little weird it's leaning forward that's not it doesn't matter to us at all but right there as long as our table is level we're good to go all right there we go guys let's weld that in oh yeah I love it makes me really really happy I've got one more step we're gonna get a coating on there protective coating I got a call from Abel on the other day and he's working on a table and he asked me about the rest converting the good of the land he does a lot of tool restorations and and I seen him use this on it was an old Canadia pedestal grinder and I and I think he just used this and didn't paint over that and I thought it looked really good he saw that I had used it in a project where all I did was put the rust converter on and I wasn't planning on doing that I was originally planning on putting the rust converter on and painting it but I loved the finish so much that I wanted to try it I wanted to run a test on it to see if it would hold up guys we've had stuff outside with this rust converter on it for I don't know like a month two months they spent two months it's not rusting we're in high humidity area we've had several rain storms so yeah I'm going back in and I'm gonna rust convert this as well and we're just gonna test it for you Dale is over here inspecting my work he was just fixing the power hammer don't worry guys we'll go inspect his real quick what do you think advocated start building a table don't you huh I think we need to stop building these tables and selling them yeah it's great right it's kind of the precision we were going for with this thing I'm really happy with that I mean that's a pretty darn good cut right there okay here's another great feature built into this system right here so you can just pick this guy up come out slide them over line them up right next to where you want to cut we've got a lot of room over here to make an additional kind of angle cut so if you have a big piece of angle iron and you may need to make a little slice in there just set the table off to the side and then run your angle iron through there well guys I hope that helped you out if you're like me and you really liked the idea of the swag off-road Porter bandsaw setup but you don't own the porter band this might be another good solution for you it's working well for me it saved me a lot of money going this direction the soft seems like it's well built I do have a one year replacement warranty on this saw that's a really really good thing so anything happens in a year I'll know if I've made a mistake unfortunately you won't until that happens but hey we're always in this together right well thanks guys make sure you hit the bell notifications or you're just not going to be able to see my videos also follow us on Instagram I've been uploading quite a bit then seems like you guys like it and for those of you coming to the good of the land fest what does the good land fest you might ask stay tuned but for those of you coming to the good land fest that already know about it see you in November
Info
Channel: The Good of the Land
Views: 302,737
Rating: 4.7295465 out of 5
Keywords: milwaukee m18 fuel, milwaukee tools, milwaukee tools vs dewalt, klutch band saw, klutch band saw reviews, milwaukee portable band saw, milwaukee portable band saw table, milwaukee portable band saw stand, milwaukee portaband stand, milwaukee killer, Testing The Toughest Cordless Drills On AMAZON, the best bandsaw, bandsaw, band saw reviews, tool review, best band saw, the good of the land, the good of the land museum, best bandsaw for the money, best band saw for cutting metal
Id: z2jcbwchxGM
Channel Id: undefined
Length: 10min 55sec (655 seconds)
Published: Tue Aug 21 2018
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.