Terramite Engine Threw a Rod, Can we Fix it For Free?

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
[Applause] hey guys and how's it going so the process of buying a skid steer that ended up having a blown engine another piece of my power equipment also wanted to uh not feel left out I guess it would be my teramite tractor that we gave it so much love about three months ago changed all the fluids went through it made sure everything was operating okay fixed all the lights all the leaks well it decided to throw a rod because it again got jealous of the other machine being worked on so it is now at the shop and I don't know we get about an hour's worth of run time on it since we changed the oil and uh it's been clacky for a while I thought it was more valves but uh guess not she's poofed I believe one of the rods totally let go it was make a screeching noise and then I got A lot quieter still running on one cylinder and uh then died so with that let's get her off the trail again in the garage hopefully I have an engine already to replace this one I have a couple that are in the same family get into it [Applause] oh it's kind of terrible yeah she's cooked see we are up in the stash in one of the subscribers a couple years ago hooked me up with a couple of engines he had a landscape company and I think I'm pretty sure one of them smoked real bad and I I don't even remember what the issues were with the other I don't know if they're any good they're not any good so I think we should probably pick one that's got the correct output shaft on it which I think we need that setup yeah they all look pretty much the same I think we just try to pick one maybe we'll bring it downstairs and we'll see what we got maybe we can fire it up off of the uh off the tractor instead of committing to it and see if it can find ourselves a good one or maybe we'll grab the most complete maybe this one it's got both valve covers on it looks like it's got plug wires there there's electric start on it and we have to go into it anyway because all the wires are cut all right let's drag that one down and see what we get that was the easy part you ready [Applause] one testicle it's missing a dipstick let's go steal the one and the other one probably has no oil in it a different style I'm about to go shopping upstairs for one yeah it's up the same setup so it looks like we need one like this hopefully it's not too much stuff that's different it's got a little bit of oil on it hey what's your guess I'm gonna say bone dry yep you take a quick peek make sure it's a drain plug in it we'll throw some oil in and uh we'll hook power to the starter and give her a quick listen it's got a drain plug the weirdest nothing's in it though right that's all this pardon me it's got one of those those click clip ones I think you push them in and turn them yeah that's loose tighten that up and throw a little bit of oil on it yeah look down the hour meter I think it's got like six hours on the other machine we've got some yard sale Pennzoil HD 30. if it's good we'll change it but for now we're just gonna put whatever we got in it I give it a a 40 success rate again I think he was saying the engines had some kind of issue I don't know if all of them did or not or some were Replacements or okay you just give us enough to to build oil pressure you know yes I would the other engine was um a little valve tappy terrible but it apparently it was Rod not valve these are a little more I was in the process of um I was digging some railroad ties out around the camp so I went down around the corner got the machine down into this like little tucked in area Outriggers down backhoe extended uh like the Outriggers down and it as soon as I went to go with the backhoe part of it it just started screeching at first I thought it was the backhoe itself like like when it's because it was as soon as I went to go put it in motion a little bit more the um it screeched and stalled like the load was too much on it and I went to go crank it and she no crank and then it like kind of pushed through and then when it started back up and then it started rapping like crazy I knew it was done so it's the machine was in a place I could never get a trailer to it plus it's fully hydraulic all the Hydraulics are down backhoes out it fired back up I quickly um sucked all the Outriggers in and drove the machine like up onto the trail so I can get it with a trailer and that's what I did that's good enough all right let's go get a jumper pack and we'll give her a spin and see if it spins then we'll kind of give her a listen and maybe I think the plugs are out of it we could probably do a compression test see how that looks yeah just to help let's go throw a little bit of oil in each cylinder before we spin it just to give it a Fighting Chance in case it's uh got anything in there and again it's you know store with the plugs out of it I don't know what the history of it was I think there is two colors that are similar to each other not positive of that so I'm hoping that they are a match so we're going to want for power and ground to it I got a jumper lead so we're gonna go from power to that little terminal in that short starter should crank should come down there all right see we got spins this goes to give her a good I'm gonna watch out for oil doesn't shoot us I don't know if that's Blow by it's pushing the dipstick up let's go lock that down that's kind of weird so is that let's go pop my valve cover up seems like it's got a ton of blow-by this valve cover is already loose too so there might be might be getting another engine well that might be an issue [Laughter] there is no push rods or anything in this side I wonder if that is by somebody stole Parts off of it or it's totally junk let's um I don't think you figure out the Pistons going up and down we can go peek on that file cover is all locked on yeah I don't know if somebody just stole Parts on it or let's go give her a spin I can look on those lifters see if they're popping all kinds of stuff out is like um foreign [Music] sure what that is hmm I'm gonna go look for another one you want to keep going with this one it's got a wheel up in the top um let's go just see if let me go get a set up so you can look down that puzzle the pigeon's going up and down not sure what you can see but if you spin it see if the Pistons going up and down so that doesn't seem to be an issue it does look like it's got oil up in the uh lifter bore he said I don't know if somebody just stole some parts off of this thing or judgment by that I think we might be better off trying to take from something else hmm game do a compression test going shopping again sure is going to suck if none of these are good huh it's gonna see if this got anything in it that one's got away on it let's go try this one make sure it's got the shaft on it that we need I think they all did yeah that one you know who knows it doesn't even gonna come off of there okay both testicles now feel the even pain let's go try that one this one's got plugged in it so maybe we'll just kind of like leave them in we'll give a quick listen to it before we do a compression test I do see it looks like that exhaust port on this one is dirty and the other one's clean so that might be the engine again this was this was like four years ago three or four years ago that they were donated to us I was hoping to build a V6 for V8 have them hey you ready see we got the same thing let's leave that house it just spin it a little bit that one's popping water out this is not looking good for the cause no is it thank you let's um pop the plugs out of it and uh see we actually you know what yeah what the plugs out I want you've got spark too not that we can't steal all the stuff off the other engine and I think the hydraulic valves that we saw on that other engine so there's no valve adjustment to make if you've got a little cruddy look at the other one out here's the one from the other side that wasn't gonna run let's get the light out of you it is totally bridged across the plug gaps there is no there's no no Gap in there whatsoever okay go spin with no plugs in there for a second and then we'll go get a compression tester at least it's Puffin let's go into the finger that one the one on this side is weak you can even hear it it sounds different I'm gonna go dump a little bit of oil down each cylinder and we'll spin a little bit and get the compression tester probably pop that valve cover off the other side too this doesn't look like the best engine I have is the one that's on the tractor let's go give her decent amount I would think we'd have enough parts to put one together if we have to where he wasn't planning on that let's go kick it to the side a little bit so it doesn't spit away on your eyeballs [Applause] let's go get a gauge this should be the good one 125 that's perfectly fine for that I'm gonna guess the other side's got like 30. but also hoping if we put the oil in it it may have been just like a valve knot ceiling or something yes it got some like rust and crud around on the top of it that's what I'm hoping for [Applause] let's see what this one does but take a bet I'm gonna say 20 psi or zero I'm gonna say it's the exhaust valve hopefully it's just again not ceiling it's just got some crud sitting around it let's go buzz that valve cover off and we'll take a look at them see what that with the heights of them are if they're coming all the way up yeah I made the mistake saying to myself I mean this is going to be kind of a boring video video it's just gonna be swapping engines prove me wrong that one was loose and that one was loose to get it's kind of spin we got on them kind of seems like this we could put air in the cylinder and you see where the air is coming out of here we're gonna give them let's go get like a mallet we're gonna give them a couple of wraps on top of them see if we can kind of seat those valves a little bit thank you foreign didn't do much made it worse yeah we got nothing that's another dud I'm wondering if maybe we could steal that while we got them apart we'll take the rocker assembly off of this one just throw it on the other engine we got one more to try I'm gonna peek in there see if that cylinder is even going up and down yep let's go throw a plug on it real quick now with the wires disconnected I believe it should have spark for the most part let's get actually we gotta go clean a plug let's go clean one of them up so they actually have a point gap of of some sort so I went and hit him on a wire wheel they're so bad down in the insulator was packed I actually ended up getting these are different plugs all right let's go kill that light this evening Spark and knock the wire off somewhere oh no ground so it's got sparks dude we know the electrical part of it works actually you know what might be an issue Bend push rod but doing the travel which is weird that ran into something that caused that Rod that uh I don't know if you can see it that push Rod's all bent got to clean your lens you got oil in your eyeballs all right hmm both of them not just one because they got decent travel Let's uh quick spin it without the um plug in it see we get where's the button a little pressure yeah um I'm gonna go hammer them straight real quick and we'll throw them back in and we'll just give our double check and then we're gonna go move over to the other motor again I got them straightened out foreign [Music] my thought is I wonder if it over read and it floated the valves the valves hit the Piston you know and again interferoned with the uh push rods bent them and then and the valves are possibly bent on the inside but let's go swap this stuff over to the other engine the first one we started with bent them again make sure they move kind of funny that they're both the uh [Music] both the same cylinder Hammer that one a little bit more we get a a good outcome we'll take the good part right now I'd rather just kind of be working with the junk that we're hammering straight like if I were to put good ones in that other engine it would have bent them show them good down below yeah I'm centered we run them home [Music] [Music] we could spin that over by hand all right starters engaged there it goes jumper pack on it what's your thoughts let's go see a little [Music] no compression [Music] [Music] let's um push some air we're gonna take these right off again let's go push some air in the cylinder and we'll see where it's coming out of the intake exhaust or down at the crankcase don't think it's optical illusion it looks like the exhaust valve is sitting lower than the intake valve my guess is that one might be bent and just for assessment of Parts before we make sure let's go throw I'll plug in this one and we'll see if it's got spark you know if the coils are good on this foreign so both valves are all the way up and I'm going to push air into the cylinder and it's either going to come out the intake out of the carburetor it's going to come out the exhaust port or it's going to come out of the combustion the crank case it's either going by the Rings the compression is either leaking out of valve on one of the two so let's see what we get just turn the engine over got a good amount nothing out of the intake a good amount coming out of the exhaust I'm gonna put just The Rocker on the intake and we'll spin it over real quick and see if we get any compression without anything being on top of here because it's not like we're still trying to figure stuff out let's see on that [Music] so the exhaust valve she says more likely it's been my guess is it floated maybe on the other engine it floated to the governors may have ran away or they over throttled them common theme what do you want to do you want to try tearing the cylinder heads off of them and see which one's got my guess is the cylinder heads left and right may be the same let me go get rid of this air gun I don't know if they are if we're gonna go now the exhaust is gonna the exhaust is the left and the right there both exhaust face this way if the exhaust went on the other direction right if we swap that around yeah we're screwed we still got the heads on the other engine quickly let's go figure out on the tractor which cylinder head is pooched so we would need this one to be good let me pull this plug we crank it over and it's got some compression coming out of it let me know this side's decided it's still spinning well actually listen through a rod so at least we think it through a rod so both heads may be good all right so that's the side that's still working good we should have some kind of mixer parts let's um let's go to the other engines we'll start stripping them down we'll pop heads off of them we'll take a peek what's going on inside there I know people are going to ask took the one out of the other side see what we got and a nothing well I think we can have pieces to try to put one together um do you want to try bringing the dropper pack upstairs for a I'm out of nuts so let's go bring a jumper pack upstairs real quick we'll spin that other engine maybe we'll bring a couple of plugs with us actually we'll bring the compression tester with us and the button and we'll spin that one right up there and see if there's any kind of chance that that's got some life to it so it's got a spark plug in that side and not in that side and this is the side that's always blowing up on the last two that we have see if that starter's got any life to it and see what we get hang on that one's good let's go get for plug loose nope I need to bring the socket up with me and this is the trouble size that we get all right let's get maker official you know if I brought the whole palette down with all three engines the first one it would have been just fine I still think we may try to make a good one out of those too or those three I'll jump the gun though see we got that's okay plus the carb got a carb's just sitting on it 100 yeah let's go check the other side real quick and 120. question is on this one that pulley that's on the front of that right there hopefully that comes off this is dinking much longer than I expected we got a plug up here let's go check for spark real quick it feels like it's plastic let's go there yep that's marked and third time's the charm it's like strangely getting easier I see what this one wants to offer a floating carburetor [Laughter] why but why does it have a floating carburetor all right let's go see if get anything in it I don't think so [Music] yeah like a dribble we'll go top that one off and it's already got plugs in it so maybe we can um dump a little bit of fuel down the intake it'll kick off for us all right so you got plugs in it plug wires are on I believe carburetors off I just took the rest away it's gonna give it a little bit of fuel and we'll see what it does make sure that's fuel thank you doesn't sound clacky or anything let's go try one more time kind of hard to hear over the exhaust right and away I shut off that when I was feeding the gas I think we lost spark let's get a little more oh got one last shot pretty good I think we're gonna go steal all the externals from the other engine because we knew it was running anyway but this one definitely looked like it was firing out of both cylinders right so let's clear that crap that might be maybe we'll make another video trying to make one out of the remnants of the leftovers but for now let's keep our goal trying to get a machine up and running all right so we gotta go get the engine out of the other one we'll get this crap off the bench we'll put the two side by side and see if we could tear one down and make one decent one put it back in all right just because it's fun yeah one last thing I want to check I want to check for oil pressure this is the oil pressure gauge it should be lit when there's no pressure when I crank that it should go out see if it can do it without starving it so we got a little pressure suck we go through that and it doesn't work I guess we should also deal with that first make sure we can get that out of there probably get it with a puller so we've got a set screw two set screws Point sockets when do you use an eight point socket now shouldn't have to come all the way out that one's run all the way in come on I guess we should probably just get a puller don't even bother trying to hammer it judging by the rough that's in there right Falls right off yeah let's go driving puller hey you're gonna put up a fight that's a yes I'm watching a Finn see if they're gonna break off on us any more set screws yeah we're going and my battery's dead foreign get that outer ring to expand just a little bit off of it it's gonna be a little warm we are almost there I have to put like a shim or something and push off of put a socket in the center of it I should just give us enough to it's off to the side let's give her oh yay we're back over at the machine it looks like we can take I already got it all blocked up I got there's a safety bar in there it keeps the Hydraulics up and then I curled the hyper extended the bucket so it doesn't want to flip over it looks like we can take the hood the gas tank and it's like four bolts on the bottom that whole front assembly should come out of our way give us a little bit of work room that's in there well we got a fuel line and then power to the headlights really all right so I'm going to work on that let me not bore you with that part of it and I'll see about getting that out that definitely makes it easier to work on so we got a throttle and a choke cable last time I had an issue with the electrical plug burned up I'm like well I'll just go jump them right across because why would I ever have to go take it apart so we'll just go I think this one's got a connector on it I could break but the other one I just I'll just cut right in the center of course you didn't see anything as that huh so I'll take them apart I'm gonna mark it take a picture of it and then we'll just we'll just cut this right down the center for now what about that one oh that one's open right there okay so we'll take them split them apart we have a drive shaft in the back looks like a set screw hopefully that comes apart that's kind of sucky too huh kind of like we just went through hopefully that actually uh oh that shaft is not the same diameter I don't think ah let's go measure that real quick I thought I thought we were good maybe that one motor's got a fatter shaft than the other two oh the tail it just keeps getting worse and worse all right let's go measure one one and a quarter and that caliper hasn't changed there you can see it's wrong so there's that you suck none of them are right I saw the taper on there I'm like yeah they're tapered down to the right one I believe that is right part of the crankshaft they do not believe that comes apart and is off like the nose of it that's right to the crank I believe hmm things that make you go they're ready to see Uncle yes get that fan out of the way and see if that unbolts long enough [Music] well that's looking promising we're not foiled yet awesome a second layer the flywheel has to come off the flywheel has to come off how would it come off around the uh outside of the crankshaft nice it's not the part of the crankshaft cool I got a little bolts out I think let's see if we can kick it a little bit so we can get better access the coupler all we're gonna get all right so you can get them loosened up the other part is too we don't have much room in the front we're right up against that bolt like how much do we have to be able to pull out of the one of those collars this one looks like we need about I don't know what about three quarters of an inch an inch let's see if we can get that set screw out worst case we can take it pull it apart from the rear there those two that front one I would have two on it too right we don't have the option of getting a puller in that one though hmm yes you can get that to um oh move that's a good sign I guess worse you know like I say worst case we can try to take that Universal apart I don't think that's going to happen very easily neither good thing the engine it'd totally blow up so we can't turn it at least we could spin it to what we need you know so I'm thinking if we if we're gonna have to lift the front of the engine up get clearance over that let's see if anything moves I'm betting not do that you think it's going to come out a little bit the height out of it anyway I'm going to um too bad I don't have something I could tie to the ceiling and lift up on it like a come along or something I wonder if we can get like a little pry bar get on there to get a little push um Mako tried loosen in that back one it doesn't look quite as Rusty and then maybe we can get like a pry bar in here and and push off on it I just don't want to that's the pump right there you know that's that's not a um a cheap piece of bit neither yeah it's gonna come apart just doesn't know it yet give her a little I don't want to go crazy on that like I said that's the pump so let's go see if it'll move and see how that's flexing on the pump shot there yeah here we go yeah so if I think if I lift the front of that engine up give it some light okay look at the front of that engine up you should be able to come forward come on baby yeah all it did is push it back so how am I going to get around the front of that how did they even possibly put it together the other part I was thinking too that we like we took the fan apart and put the shaft off but we that that fan cover will not clear any of this so we can't get to the second set of bolts hmm I may rig a come along up and try lifting up on the engine from the bucket but even with that I don't think there's enough height right there I'm gonna get it back in come on it's up high enough we got it we got it yeah we [Music] get to lift this one up foreign there too yeah I was trying to get up over the top of this you know that looks like it's kind of all welded together too like that nut is welded to the frame so even if we took whatever this is apart it wasn't having it because it's going back in the same way let's get that over on the bench and start making one good one out of them all right let's go see we got the answer difference is I see quite a few already the other one had a screw on screen here this one is like clipped on it doesn't have the metal access covers to it that carb map the same hard to say about curves look like they're the same this bracket can go away we don't need this this one has a fuel pump up on the tin the other one was using I don't know what I was using oh yeah the same family unfortunately it's kind of wore off a little hard to tell huh as long as enough stuff exchanges from one to the other at some point we don't care the regulator is in the same location that's good both have an oil pressure switch on them let's go peek it my biggest concern is as long as we get that drive as long as that's the same I guess we're good to go right dipstick's different that one's got a fatter setup I don't know if it's going to matter you can't change it over neither starters look the same exhaust hopefully is the same this one looks like a cylinder head temp sensor on it I don't know if this one does now on that one Governor setup let me get our two rods there that looks pretty much the same so maybe you don't have to change that as long as it works all right let's get the exha actually before we deal with the exhaust let's get the front how about the power plug it's pretty similar let's get the front section of this off of here and we'll peek on what's going inside there see make sure all that is swappable over because that's the biggest important thing that the cutscene spread and everything to it no it sucks it's got those little one-way Clips on there it's a little Chinese fingers things and I think this is plastic around it I don't know if that's gonna uh survive the demolition I hope they make a tool for that try to get behind it and open the little tongs up there it goes it broke good rather that break than the plastic piece how many are on there it's like three that one went to another country we could probably use the metal one because that other one's got the four bolt flange with those long bolts that came out of it okay you're not going anywhere you need screwdriver to get behind it should be able to get in there maybe like an extension let's even get them buzzed off of there taking a quick look at the other one for the bolt pattern seeing how close it is I think we're okay worst case I'll punch a hole right in it can we get right through it figure out I like a straight shot on it just gonna round It Off hmm I wonder if you think I can impact gun and drive this off of here foreign get it now so we need this to fit on this oh yeah there you go hey I wonder which one we can go with for the like this one's called the standoff with the other fan let's go grab the other fan real quick see what that assembly seems like it's a little bit better setup you know yeah I think it's going to interfere with anything so I will go with that oop I still want to take it all apart anyway we gotta get that paint out of there but yeah your fat shoulder's getting in the way suck it in yeah it might work out better for us than that plastic when it was on there but those clips that we don't have anymore all right so let's um I wonder if we should just try to go for changing like this is open up top this one's not open up top I don't know if they do oh those are just plugs so that's air that goes into the air cleaner setup maybe we just steal like a bunch of the externals maybe except for the fan and just start swapping pieces over is get the exhaust we'll swap that over fuel pump yeah because we're gonna need the mounts for this fuel pump on here anyway and whatever else we kind of find as we go along with a couple of pictures with my phone real quick just to uh so we know what's what and try to address it the best as possible I don't think that's going to get in a way in a way they went with a smaller one foreign you think any mice I'm actually pretty clean in there too bad you can check the charging system before we took it apart be nice to know if um that was good or not yeah that would sucked I have to go take it all back out because it's not charging go pop the one off that was inside the machine again not terrible for you know how many 2500 hours never been opened all right so there's two things that have popped up and trying to figure out how we can address one's going to be the oil drain so the original engine has a plug coming out of this the bottom of it this one has where it would be and then it has this coming out the side looking now run to take it and open it up would be a drain and then it's got like I don't know if that's just an oil level switch oil pressure switch pressure's up top I'm not sure what that one is let's go look at the machine real quick see if possibly we know where the two bolt holes are if we're able to maybe drill a hole in the base plate here we let it piss out instead of trying to drill into the block and the other thing I see which I'm not sure yet this has a pulse pump for the fuel pump and that is right here that hung up on the tin the other one didn't have and there's a port apparently on the back of the engine right there let's go flip that one up real quick and see if it has it so it looks like right there the fuel fuel pump looks like actually it might be that right there we might be able to get something that comes out of there I think so I should just be a vent to the crankcase I should take care of that let's go look at that oil set up so you can come up with something yeah so that's where they were draining it before I wonder if that's thick stuff that's half inch thick plate too we would need right here the other thing too is if we that's got that big fat dipstick on it might be able to suck it up through the dipstick hole kind of like you do with a boat hmm I will keep that in mind we'll decide I have a feeling we're gonna probably be drawing it up through the through that maybe a plasma cutter we can cut a chunk out and just uh give her a little underneath feel make sure we got nothing uh in the way there there's a frame rail there's a frame rail right here and it goes from the hole about an inch so there's a big frame right here so I don't know how much access we're gonna be able to get with that that's not the end of the world actually I think we might be okay it's right where actually this is right here because this end is we're sitting backwards on the bench right yeah so where that little hole was was this plug on the side it's not down here and that's where that is we just get rid of that apparatus and we'll put that other one that's in there so good I think we're okay needs for you to say right hey let's get the oil out of the blown up engine because I need that plug anyway foreign metal Sparkles we get out of it I actually expect a little bit more than that it's kind of weird too that it blew up it's very dark also like again it's I think I got 74 so it's actually like like four or six hours at it he ran after the oil change I quite sure why it uh gave up the ghost find out I got um I ordered a rebuild kit for the Kubota but it's going to be here uh probably about two weeks so that's why I kind of jumping on this plus I I need something that moves dirt yeah the Kubota was supposed to the Bobcat rather supposed to be the backup machine for this one apparently uh they both decided not to play well that's just more air hmm curious to see which soccer field was that like that oil filter failed internally or something doesn't get any oil hmm getting close getting that close I don't know if we should um let me try firing it up on the bench make sure we don't have anything that's uh out of whack because it definitely would suck if you have to take it all back apart again at least for a second just make sure nothing's uh rubbing or hitting ballora let's try to fill the float Bowl get something there right now I didn't clean that carb or anything it was like I've had it apart and blown it out of course every time you do that it always fails right you go top that off a little bit and we'll dribble a little bit down the throat of it and hook the jumper back to it all right let's give it a whirl see what we get I don't know if we need power to that might be power through that solenoid on that carburetor I'm not sure but let's give her a little to kick it off you can go with no choke and grab the throttle to run away on us we don't have a way to shut it off either if it does run there we go let's um give her some choke it make that shush yeah I think that shut off is not doing um not allowing any fuel to go through let's go we'll bottle feed it turn the choke off that's pretty good foreign shut off on the carburetor that was not allowing it to use the carb circuit which is this right here but it's not plugged in anything on the other end so that's the issue neat I think we're good hmm on that note I think I'm going to go home and eat and I do not feel like huffing this thing in and dealing with that drive shaft wherever that ended up what a mess huh it's like a bomb goes off every time yeah clean all these couplers up and get them ready to get reinserted I am not going to wrestle with that today but we got a good engine put back together hopefully and put that in there and it's goes back to moving some dirt that I need to move all right I'll see you in a minute but it's going to be about 12 hours kind of sorter I think we're pretty close to uh dropping the engine in before we do so take a look back over here it'll probably take a few minutes and uh dig out the 25 years of mud that's been under this engine make her all kind of pretty well I do expect a struggle to get it back in but I think before we uh try it let's give myself a you know Fighting Chance let's go get rid of crap that's on there oh [Music] I think oil that up a little bit we'll probably stick it on the engine and uh we'll work on trying to feed it on there so let's go set up the motor for getting in here this is gonna be fun guys here we go for a little Lube on the shaft party without that all right that's about to run that in as far as we can I don't know if that was a good idea or not now it's bound up I'm hoping that we get to be able to drop it in have a little bit of play then go forward and I think maybe we'll work smarter not harder and I got the lift table next to us we'll slide it onto that and wheel it over and level over right up and drop it on foreign foreign yes I said it let's make it a little cozy for us probably should have rotated the engine so that key is lined up correctly it would have been a good idea so it is at roughly nine o'clock and the engine's at nine o'clock got that like get down in there you know it's got to get rotated just the hair probably isn't gonna push the engine forward there's no place for my hand there you go come on oh yeah all that bitching that wasn't that bad at all yeah all right we'll get some bolts in the bottom of it all right speak now you see anything that screwed up let me know not quite sure on a throttle I had to go back this stop way off compared to the other one that was on there I'm not sure if it's gonna over rev or not rev up high enough should probably put a plug wire back on huh and wires are kind of I I put one of the ones that were damaged now that we've got a better plug I put that one back through again made a new end on it but one of them I left out of the circuit the red one that was there I just taped it up this is already taped up this goes to the headlights and I think everything else should be good the rock and roll there's a cricket in here all right let's go uh give her a spin with the key and see what happens we don't have gas tank or nothing soaked up but there should be enough fuel in that carburetor for it to run and I may want to put a battery terminal back on Sparks yeah currents let's get it some choke I don't know if it got spark that's the look at that move too dare I say it actually sounds better than it did before ever it's gonna run out of gas in a minute but that's okay much quieter yeah let's see if it shuts off it's funny if it doesn't all right I'm gonna go take the hood and gas tank assembly we'll go through that back on I'll hook the fuel system up and then we'll rev it up make sure that the eye the high RPMs work like they should and then we can run the Hydraulics put a load on it all right let's go fire it up so you just got some RPMs there [Applause] [Music] I'm going to be getting gas might take a second to fuel pump is full it's not grabbing high enough New York you hear it it's probably at like um 2500 rpm we should be able to get up around about 32 35 something in that area and wide open okay fuel filter's filled it has to go through a system there's like a lockout right down in here and then goes back to the carb and fills it up after the fuel pump plus it can go MIA prime it a little bit and we'll run it and see if we can get it stay running I think I found it there's the fuel pump and it won't do anything if you don't hook the gas line up to it so there's that for a little Prime that would drop the hood [Applause] because it would have to be down for the gas to flow at the prime I'm gonna bring it down back to idle prime it again give that a second see if it holds up let it warm up yeah before it always had a look to it on on it like at that RPM it was like low you could hear it like it would just be firing on one side was a little on the weak but it may still do it when it warms up it's still the same carburetor and everything that was on it before it definitely sounds a lot more even okay speak too soon so that one screw I showed you I'm gonna try running that in hopefully it doesn't affect the idle I don't think it should I think what happens is when um Susa starts up the governor shuts the throttle off but before that it's the carburetor is kind of like in mid throttle as soon as you started up the governor makes it go through the idle stop not that eccentric screw which I think is going to be the top RPM either that I might be able to tweak that throttle cable a little bit more throttle you turn it pull it out that's not bad let's get it off the um off the arms [Music] yeah I had to try to turn that up a little bit so you get a little bit more RPMs out of it that's pretty decent use the engine we took out I'll show you what I adjusted so it's this right here and that's the throttle part of it you can see how it can separate and it's going to work independently of this but this I think is when you when this is connected to the throttle cable I think it's allowing how much more push you're giving on the system give it a little more push Here's Where We Are this lever right here is your throttle this one is the choke and it go through down in here is a governor this arm is a governor so this indirectly affects the throttle and this is what I adjusted right here is this this bolt with this stop it was way out which he had it like on a I think was a vac system and it just would have ran Full Throttle it wouldn't have an adjustment to it I need to go use two hands and correct pliers but I'm going to go back that screw out give it I don't know about four or five turns out give this a little bit more push on the throttle to see how it move the lever a little bit more push it hopefully does not raise the idle but gives us a little bit more top end [Applause] more that much the lower you can have it too I yeah you lose a little bit of speed of functionality with the machine lasts longer [Applause] and now that's pretty good so the Hydraulics respond fairly decent I'm gonna go pop the air cleaner off wrap up just a couple of loose ends and go buzz around a little bit [Music] yep it always sounds like that foreign [Music] [Music] [Music] [Music] foreign [Applause] like when I was running it before it it was starting to smoke and again on its way out and I think it pushed a bunch of crap into the exhaust system in the muffler so it's probably as it's heating up just burning that off but I think definitely seems definitely definitely definitely seems to be working much better and a lot quieter than it was before they're good machines you know the two will drive that's only probably downfall on them but uh with that the tires that are on are pretty beefy so it gets out of its own way out of trouble I've had it on some pretty steep inclines plus if you do get screwed do you just take the backhoe and you start digging and pushing yourself out well you need to get out of awesome she lives I don't think we spend any money on it either so I ran it around for another half hour 40 minutes it seems absolutely fine no smoke everything kind of cleared right up idle's fine and uh topped it off with some gas still want to change the oil in it get an oil filter for it that still needs to be done before leaves the Bobcat I think Kubota Engine is waiting on a rebuild kit from China I'm not sure how long it's going to take to get here I may go and jump onto while I have all this crap kind of laying around and me try to build a good engine out of these three and then maybe we'll dissect the one that blew up and see if we can see anything that happened on it then we got the mini bike still waiting it's turned the parts came in for that so guys with that I'm gonna go sign off on thank you all for hanging out wrenching and getting some my stuff back up and running as my dad says the more you got the more you got to take care of I think that's the truth still better than digging holes with the shovel though right I rather swap Motors and dig holes all right guys with that you can sign off thank you all for hanging out and I'll see you soon later thank you [Music] [Music] [Music]
Info
Channel: Mustie1
Views: 398,813
Rating: undefined out of 5
Keywords: mustie1
Id: E4LeG_6toeQ
Channel Id: undefined
Length: 78min 28sec (4708 seconds)
Published: Sun Jun 11 2023
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.