Stained Glass Effect in Epoxy Resin Coasters using Pebeo Vitrail Glass Paints

When making hot drinks coasters always ensure your brand of resin is temperature resistant to 100°C (212°F) when cured The mould I'm using requires 225g resin in total, so I measured 105g for the first pour and 120g for the second The first pour has very fine glitter added Divide the resin between the four sections of the mould What do you call a rose that hasn't blossomed yet? Bud XD Get ready! Kill the bubbles! This design was ̶r̶i̶p̶p̶e̶d̶ ̶o̶f̶f̶ ̶f̶r̶o̶m̶ inspired by Charles Rennie Mackintosh This is Pebeo Cerne Relief SIlver Outliner (link in description) but other brands are available If ever your partner asks them to name their favourite flower... Apparently 'self-raising' is not the correct answer :/ The best type of flowers to give your wife... really depends on what you've done wrong XD Did you hear about the pink flower that came back from the dead... It was a rein-carnation XD Leave the outliner to dry overnight. It will actually shrink a tiny bit when it does. The Pebeo Vitrail Discovery set is the best way to buy a range of different colours in small pots The paint can be added one drop at a time with a toothpick Only a thin layer is needed Allow the paint to dry overnight (a minimum of 8 hours) The second pour of resin should fill the mould to the top The white paint turned beige in the resin, and the violet went dark... I tested the other colours and they all worked fine. I'll put more experiments on my Instagram @resinaceous Thanks for watching! [Alexa] Roses are red, violets are blue... [Alexa] If you were a flower, I wouldn't pick you

Channel: resinAce

Views: 72,410

Rating: 4.931263 out of 5

Keywords: Epoxy Resin Project, Epoxy, Resin, DIY, Tutorial, Resin Art, Resin Artist, Resin Pour, Resin Mixing, Resin Craft, Resin Project, Resin Ideas, Resinace, Resin Coaster, Resin Mould, Resin Mold, Silicone Mold, Silicone Mould, Resin Cure, jedrek29t, buzzing fish

Id: 6pVB2Y4jyTE

Length: 5min 59sec (359 seconds)

Published: Fri Apr 03 2020