Stable Cascade in ComfyUI, installation and how to use

hello there my name is Vladimir and welcome to my YouTube channel where we're going to install stability cascate on the comy UI before we start installing I want to be sure you have the manager installed if you don't have manager installed it's very easy to do for that we you take this repository and install in our custom nodes I will provide links down below for you to go general what we need to do is we needed going down to installation and and right here you can see it's have this path so I have two different versions I will prefer first one for this just be sure go and copy this git clone I'll probably put this down below in descriptions for you next you want to go to the your installations of comy UI and I'm using confy UI Windows portable installation you can have it multiple versions all what you need go uh scroll down to the custom nodes expand and you can see right here I already have it one install it so we we will'll just repeat it same path we go to custom nodes on the top not inside just custom nodes and right here where is a path click and type CMD or command prompt or terminal whatever you like to call inside here all what we need to do just copy and paste this git clone after you do this you should have it something like this where it says get clone copy and creating the best um proof that you create in your folder you should have now the confy UI manager this need be appear after this you want to restart your server if it's running already if your confy server running you want to restart and in your menu on the right side you should see this button manager what manager does is allowed us to open and install different models different custom nodes just easy manage and I will show you reason reason why it's easy so next let's work on our stability stable Cascade and if we're going to main repository you'll notice right here for comi it says um this is repository it deprecate deprecated because it's now um include inside and it's actually include very well because before it just was one big node you cannot do too much and now it's separated so you can actually Implement control net and implement much more to this so it's a way bigger upgrade and uh you just need to follow some of the links and some links will lead you towards instructions again all this links down below and this is important to see where you need to go because you need to go to the tree Cascade main tree and download it and place this save B sensor c and b in specific locations like in model unate next a you need put it in a model VI uh where and other ones you need to put also in a clip and again all of these links to all of these files will be down below however if you have it manager you can do this much easier way by going click on a manager going click in install models and right here just type Cascade in a search click search and there you will have it all of this models you just going click and install and you notice it will place them in those specific folders so depend how you prefer if you prefer go and manually put it in your folders it's one way or you can use it through the manager and install them there the other thing is kind of important if you want to see example it is this Json workflow below you can just simple going and copy all of this code and created file you can name whatever you want it as long you have a Json um extensions one thing I would recommend for you to change and reason is if you look right here on um our the clip clip is called Model do save and online 111 if you look this is actually different name for that so you want just replace this clip as the F fp16 replace just with a name model then when you preload workflow it will have a correct name it's not big different you can also change just inside the model itself but it just make little bit nice and easy way to do it okay so when you install this you want to restart your server and after you restart server you can just take this Json file you create drag and drop and there you should have it work flow notice how it's well done the older version if you if you saw other installations we had before or other people do it they usually have it just one big node you cannot modify too much here in a new ways we have it our loers for different stages which is very nice we have an AR clip and notice right here I have it like old one and this is good example before modifications and if you just click Arrow it will replace with properly models have sensors if you have d clip so be sure you change otherwise this will come up air and says that cannot found this file next of course we have it our clip in quarter de quarter we have our latency image here and the also stage eight and B you can kind of modify we can play a little bit more around here and you'll notice we have a latent image input going next to Stage B and our Samplers of course we have our stage as sensors and decoder and image in end first time when you click and you run this it will take a little bit time it's actually took 10 some minutes or more because it takes some time to preload it everything uh be patient second time it will be much faster and what we're going to do is just go ahead here and click uh run our prompt and we'll just leave it everything same it's called Beautiful scenario natural glass bottle landscape Alchemy so yeah let's go ahead click run after some time you should have it this kind of image come up so that is what we render and save it and of course you can go and modify a little bit more change around play with these elements the if you prefer to experiment with the older node when it was just a one node then you need go and install in the custom nodes it's not that hard to do you'll just need to do same step almost what we done before it's mean in the same file where it says deprecated we'll click on a code and we'll just go and copy this GitHub delocation so click on copy after this going to your so we will need go to your custom nodes on the top right here just typ CMD and in this right here you need to type G clone because we're using git clone and we just need to go and paste the path we took for our HTTP so after this press enter and it will go and create for you clone and again you can observe when this comy UI diffuser stable Cascade will appear it's mean the new node was created and cloned properly after this you want to go inside and we need to install additional requirements for this to run properly so right here we have our requirements files and if we open this file you can see this just a command that g location for the diffusers install it and additional all necessary stuff so to run this again we need to go inside actually our main wi Parable right there uh just go into your route kind of for the confy rout that's what we call CMD open your terminal and inside terminal we actually need to run python so depend on location for your python we can just type um path python uh let's go XC next let's go Type M peip um so we'll go to this one install and next we'll go to minus r specification and now we need provide the path path for this um requirements you can copy directly from this but it's much easier if you just go and copy as a path and inside here just copy and paste it's all what we need to do next just press enter by the way I'll just put this command down below if python is not found for you just pit F locations where is have but it should be in your Global variable because run just fine so after all requirements install it you will have it the different node that you can run again this is older way and personally I a little bit more prefer the new way because it's allowed much more flexibility take note it splited and definitely you can apply in work now put it like control net put it some other options just experiment it give you more flexibility um point on this notice this compression 42 you can play with this a little bit better minimize maximize will give you different result a little bit on the end so I hope you have it fun to play with this around let me know if you find if something uh more interesting for you or better workflow please share and thank you for watching this video hopefully you have a great day have fun creating bye

Channel: Vladimir Chopine [GeekatPlay]

Views: 1,230

Keywords: Geekatplay Studio, Vladimir Chopine, Digital art, How to, Learning Photoshop, 3d tutorials, Digital compositing, How to do in Photoshop, How to do compositing, How to do in 3d, AI art, MidJourney, Stable Diffusion, Dreambooth, Dall-e, Free resources, Free learning, Digital art for begginers, Free tutorials, artificial intelligence, Digital Photography, Photography

Id: SEHTYJV69eo

Length: 10min 7sec (607 seconds)

Published: Sun Feb 25 2024