Splicing a fiber drop

hello everyone this is just for fun and today we're gonna show you how to place the fiber drop at a pistol and I hope you enjoy this video our fiber is countenance to 71 this tray is 226 to 272 so this would be the trade will be spicing in want to do is open up a tray try to measure out your existing fiber and we'll be putting this protective sheath here with tie wraps to keep it in place on the tray just using tie-wraps you're gonna go ahead and tie this fiber in place right next to the existing drop to 30 there so depending on how many drops you're able to do in a tree you'll have them pretty much pre marked for you with assignments and which one can and cannot be used at this point you watch a very hard enough to cut a fiber now we're gonna go ahead and strip back the protective sleeve clean off the excess on it well you can actually see your to drop fiber which is doing orange we always use the blue most people will use the orange first just like a 10-5 connection so on this drop itself I got to put on the sleeve and then off the stretcher your five-word self it would be a 250 the 900 would be for the actual drop you line it up go ahead and clean it off make sure your new cutters are clean or not it will cut at the very tip once you've pulled it back there is your fiber we're gonna use alcohol like clean o'clock Jenny to make sure you came out real nice and clean no excess on there because it will bubble up when it splice it together or fuses together what it actually does go ahead and this is pre measured check it fit in here perfectly and line up just actually cut it the link that we're needing will you set it right in there and that one's ready to go so now we need to go ahead and find the correct fiber that's coming from our our main transport coming in and giving us internet so blue will be the blue fire the blue tie-wraps would be coming from our office white will be going either down the street east west north or south so off of this one fiber to 71 is going to be the red fiber so we'll come in here find that red fiber again try not to break anything it is very fragile do you find that pick useful I like to pick when you don't have a pick you can use a small tie wrap this is a directional meter this is an older model we have the newer ones as well I actually like to order one better it gets a better DB reading maybe reading of 8.3 so this is the right fiber on the right direction if you were to try to tie into the other one you get no signal its des been cut off go ahead put it in the car Steve here again both of these are gonna be at 250 we'll use our cleaver halo chain you know first ahead of myself we're just normal people you forget sometimes now I'll get the cleaver and clean off the clean fiber again I'm sorry preset to cut to the exact link that we need ready here hit play you'll see them come together they'll make sure he's gonna be aligned correctly and it's fusing the two fibers together as we speak it's kind of hard to see but point zero two is fine in the 11.04 you drink cut recut and we do I want to go ahead and open this up bring over the sleeve there's a magnet that I'll hold it in place go ahead and bring this fiber in kind of even it out to the center this will be the heat shrink for the sleeve it's gonna go ahead and show you this heating that the sleeve itself to fuse it together so don't come apart that other one was louder in the fender but I guess it's after yeah here in a minute there you go it's got a fan on it is cooling down it cooling it down and we'll check to make sure you got all the way across it's left on one side so I'm gonna put it back in and see then finish it off cook it some more what are you using as your table there cat five bucks so that knows you here's the fan cooling it down one more time and they see it's shrunk all the way from top to bottom and now he's gonna wrap it up in this tree I think you don't kink it bend it too too sharp caused it to break it is kind of still hot my first okay we'll kind of turn on their own if you die don't force it let's chase already kind of a mess you made that look easy though sometimes a little bit tougher than that oh yeah sometimes it's worse enough go ahead lock everything back in and that's the splice is done on this pedestal I'll go ahead and tag this one and then lock it in place I'm going to put our lid back on we'll be done with this side and we're gonna move on next to the actual Ont that's mounted on to the house which to give the customers your connection

Channel: just for fun

Views: 504,484

Rating: 4.8203392 out of 5

Keywords: Splicing a fiber drop, fiber, रेशा, फाइबर ड्रॉप, fun, work, splicing, Internet, isp, cable, tool, fiber drop, how to, best, viral, tech, technology

Id: 4G0nfnrWdVA

Length: 8min 39sec (519 seconds)

Published: Thu Sep 05 2019