Small Parts Storage Boxes

these are my small part race which although my different size screws and fasteners but I want to get rid of those and put everything inside these drawers now to do that I need some small boxes like this plastic one I would use those but it just doesn't work with the size of my drawers so I want to make my own one sort of where's the material I want to use lots and lots of three millimeter and EF because I need a lot of these boxes you I think I have enough strips for now so next are the bottoms and I have three different sizes my first make these two sizes and that means cutting out strips that are 7 centimeters then I cut all the pieces to required size and that took quite a while now assembling the boxes turned out to be quite a challenge because I had to do so many when I came up with is this block which fits perfectly inside a box so I can just take all the side pieces and put some glue on and everything just goes together take some rubber belts and put them around and they hold it in place well enough and when a glue is dry the block comes out and I can take off the rubber belts put some glue on the bottom and put a bottom on and then put some weight on it and let it dry here you can see it in production mode and I already made quite a few of them but they're still a lot more work to do and then I have to do all the small ones which about twice as much and the big ones what a great idea all the boxes are now glued up and it took me about six days to complete but anyways now I have 48 big ones 100.4 medium ones and 276 small ones and next are gonna flush them all of them to get rid of the imperfections and all the glue squeeze-out you another three hours later the edges are all nice and even but also very sharp so I tried chamfering those and that worked pretty well I'm happy with the result but that also means I have to do this to all of them as I said this project was a great idea you it seems like that my Radha doesn't like this much work I think the bearings are done so let's have a look because there's still a lot of work to do after some filling I finally got the two bearings and I can tell that they are both broken feel a lot of resistance but I just need to get some new ones and router would work again here they are so now I can put the router back together now they are all done and I'm gonna finish them with a couple coats of varnish no I'm not gonna do that now I can put all the boxes so now I have three different sizes of boxes but what's really nice about them is that they are modular I can combine all of them and customize each drawer exactly what I wanted to have well I'm not quite finished yet but I would call this organized thanks for watching

Channel: Marius Hornberger

Views: 572,904

Rating: 4.9310017 out of 5

Keywords: wood, wooden, MDF, Medium-density Fibreboard (Visual Art Medium), 3mm, boxes, small, part, parts, tray, storage, box, easy, woodworking, project, drawer, drawers, Kleinteilemagazin, Kleinteile, Schachteln, Schächtelchen, time, consuming, Project, saw, Säge, table saw, Tischkreissäge, Fräse, router, Oberfräse, Bandsäge, bandsaw, glue, glue up, Leim, Big, Table (Consumer Product), Rage, Large

Id: TAChDhog2_I

Length: 8min 0sec (480 seconds)

Published: Sun Oct 05 2014