SIM800L Sending Sensor Data to ThingSpeak | Arduino Multiple Sensors

in this video i am going to show you how to send multiple sensors data to things peak iot cloud using sim 800 lgsm and gprs module this project does not require any wi-fi am using sim 800 lg prs connection to connect to the internet i have used simple at commands to connect to the internet and send the sensors data to cloud platform i am using three sensors in this project dht11 humidity temperature sensor mq2 lpg gas sensor and mq7 carbon monoxide sensor i am getting data from these sensors and send them to thingspeak using sim 800 lgsm module let's see how i made this project let's get started here is the connection diagram follow the diagram to connect the components i have connect all the components on breadboard as per circuit diagram to power sim 800l i am using 3.7 volts and at least 2 000 milliampere hour battery most of the time sim 800 l blinks 11 times and then start blinking once every 3 seconds when it start blinking once every 3 seconds it's mean it is connected to the network and ready for accepting 80 commands next step is go to thingspeak website and create an account i have already created the account just sign in and then create a new channel by clicking on new channel button enter your project name here next create four fields here write the name for first field temperature second humidity third mq7 data and fourth mq2 data and then below click on save channel button i have already created the channel so look at the channel here is the dashboard to see channel fields click on channel setting here you can see the same setting that i have discussed before next click on api keys here is api key and below you can see api url copy only the part of url that is highlighted this will be used in the code so go to the arduino sketch you can download the code from the link in the video description scroll down and paste the api url here next enter the api key here then go back and copy the key and then paste that key here then set the apn username and password of your sim card network provider find them from google my sim card network provider is telenor and here are the credentials first copy the apn and paste it here similarly enter the username and password the code setup has been completed now compile and upload the code after upload complete open serial monitor here you can see all the sensor data as well as the response of all the 80 commands that i have used in the code is being displayed here this is how you can send data to cloud if you have any question then comment below see you in another video bye

Channel: Ahmad Logs

Views: 15,732

Keywords: sending sensor data to thingspeak, gprs thingspeak, arduino multiple sensors, gsm thingspeak, gsm gprs Data Arduino thingspeak, arduino sensors, sim800l thingspeak, sim800 connect to server, gprs sensor, iot using gsm module, sim800l send data to server, gsm arduino dht11, gsm internet arduino, gprs module arduino code, arduino gsm thingspeak code, gsm sensor arduino

Id: uLJqNfX81C4

Length: 3min 51sec (231 seconds)

Published: Tue Sep 21 2021