sawing more ugly oak decking # 209

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
[Music] [Applause] [Music] [Applause] [Music] good morning youtube i'm with the eddie horvath good morning marky good morning and i'm back from erie uh nice little vacation up there and uh got my underdog barbecue shirt on yeah and uh good barbecue you got to eat there too as well and uh well if you're from the eerie area uh boy that is a nice barbecue joint so look them up uh if you like good traditional barbecue they make it every day fresh it's nothing that was pre-made that they pre-heat like these chain restaurants yeah it's you're not getting reasonably priced too yeah a very reasonable price for what it was and we got to stay at the iconic riviera motel one of the old 19 40s 50s whatever in there and and this this the rooms still had they hand you a key yeah you got all these new chains it's you get the credit card thing to get in your door you still have the key you put in the door it's like wow this is that's old school there very clean place had a swimming pool and uh and now we visited baltimore park yes had some fun there and uh hey this morning we had we're up to 41 800 subscribers wow we got 400 subscribers just this week yeah we thank everyone yeah thank everybody thank all your uh the newcomers to our channel and uh we this is what we do if every subscriber just went and got one other person you would have 80 000 subscribers please share it with somebody and uh yeah we want to get to our 50 000 goal here by the end of the year now we we wanted to do it by the fourth of july but it never happened so when we're going to give up no we'll never give up we'll keep sawing away till we get there um what do we got on the agenda for well we have to we have to definitely get to try to get the rest of this oak order cut uh and maybe a little bit of pine yeah we got some logs up on the deck and um yeah we got a little bit of pine sheeting and two by fours to make for a customer yeah and uh well sitting here in the rain isn't going to get it done no let's get it done let's get it done all right we're up at mill here a little bit early before anybody gets here and we're going to do a little bit of pre-check on everything and i found myself some red and tacky spray grease so i'm anxious to see how that works so see how good it clings to these uh rock and pinions where that actually runs your knees or your ails in and out um here's a set shaft here this controls all four uh knees in and out and you can see the the big gear in there that's your uh rack gear that uh runs the um knees in and out uh there's a lot of a lot of sliding points here your tapers uh where them spring rods are there for the dogs and i'll show you how that all works um and the dogs are set up that uh they are spring loaded so when you got a log that's taller than this one then the top one will take over and if the log's small enough it sits under here and it bites it there at the very bottom i don't know if anybody realized that there's another dog and this whole thing floats up and down so once this pinches this one comes up and it just it's just like a pair of tongs and that's how you get such a good hold on these hydraulic dogs uh someone was concerned that they weren't holding very well they they hold very well you'd have a hard time splitting that log off of there and then if all else fails there it is the master dog and it'll take care of anything that the smaller dogs won't handle you got the chain on the clock face dial we've got all kinds of stuff that needs lubricated in here i'm standing on some stickers here i'm sliding and that's how that whole gizmo works with the cylinder it runs them up and down and then the bottom one's tied into the cylinder itself so as it closes up these things pinch together you got wear surfaces here so all this stuff gets greased up and then there's uh there's a couple uh dovetailed ways right there that this whole mechanism slides in and out on and um it all needs lubricated if you want this mill to last a long time so we'll get this all checked out here and we'll be with you when we're starting to saw all righty let's get this show started and i showed you my little pre-flight check for the mill and periodically you find problems and you want to jump on them as quick as possible before they become big problems so all right and back to ducking we shall go i'm just looking for a that might work for me don't take that much off and you've seen how the dogs work and we'll put the master dog down just for extra safety all right let's make some ducking here there's a limb on there and he needs a little bit of decking for he's going to build another truck bed so he said keep me some smaller stuff shorter that is that's why you trim a tree cut that limb right off and we need a lot more one but or two by ten one by ten i got a big list in the cab here and then he's giving him instructions i'll take this last piece of one by off now we're going to take her down to a 10 inch wide that bark is just playing havoc there so all right got a good hold on it and let's go and literally down to 10 inches wide want to get the biggest biggest boards off first i don't know if you'll be able to make use of that or not but if you see how the top dogs are holding now because that log is too big for the lower ones so you see how they were loaded all right we need some one by eights a one by ten so i'll get two more off of here yeah one more after this one but yeah they have a standing order with us for trailer decking and there's our 10 inches well 10 and a quarter we're going with it all right let's layer down go back up just a little bit i don't want to pump that head block with the turner a piece of park under it ah watch yourself there you go looks like the other ones are clear all right yeah mark can really really mess up your operation and now i'm not going to hook air hoses up and buttons and cameras and no i'm not finding the marker that's the old school that's how you deal with it i'll get eddie another piece of short deck yeah you don't mind using this self protecting it's not the nicest looking stuff so there's a little bit of wayne on it i think i can edge up eight inch out of that i need fifteen one by eights anyway so all right two by ten so so all right let me flip this back and give me a second to write down all right 2 by 10 i needed nine more of those so i can put three out of that all right i'm back with you here just keeping score come on all right they're going to pull it off a little bit here just going to give me some great because it's fat down that end there we go that last one's not helping me at all there we go and you want to make sure your dogs are retracted all right let's see where we're at on the dial here make some decisions oh i might get any short piece out so let's just do this and let's get a piece of lumber off of there that'll work for his truck bed and then we'll split this in half and we'll have our two pieces it's gonna be a little heavy let me just give it a shave that'll work close enough all right let's get our next log here yeah that was definitely flexing towards the end there all right i'm gonna open this up oh that'll work this is a mail log and it's going to give me some problems i can see this right now help me it's playing humpty dumpty i'm gonna bring it up a little bit here what i'm trying to do is get it to go straight back without going it's little oh sometimes you gotta deal with them i think we can deal with that to open it up all right let's just get a flat spot and go from there so and then we'll lay this down flat that's gonna require one more miles will get her flat these logs would be no good for nothing else i'll tell you that all right let's wrestle her around one more time i could have been a little bit more forward on that one but all right big male let me come down the track a little bit so bumper down a little bit more that looks good all right let's open the space up and see if we're fine get eddie some shorts out of there again and the automatic mill you can deal with this stuff a lot easier than so let me get you passed already all right and let's get that down and get that trimmed off i'm gonna stop short get ahold of that heavy end oh this ought to be interesting that did all right gotta reverse that a lot more i gotta trim that end off first you can see what's happening down on my log deck that still isn't in let me bring it forward i'm gonna try to reverse uh just to take that tip off down there you'll see what i'm saying when i come down there i want to get rid of that and that could be a bullet there and there's the trouble all right took care of that little problem now it's fair sailing this log isn't going to yield very much so there's actually some pretty wood for we believe this is all black betty get out of the way with his fingers all right one more piece of one buy off of there then we just about got a square corner now all right let's turn this thing back see how bad this thing wrestles us all right let's take it down eight inches i still might get 10 out of that though but make sure we got a good hold on here all right we'll get some 1x8 edges out of that i don't like that big knot in the middle but that's what it gives you that's what you have to deal with that is some hard sawing when you're going through them knots all right let's see that'll still qualify for ten nine and three quarter and we're going to go with that because they're decking they're not all right roll this back and see what happens when i release the hounds nothing they're hard to turn when they're long and narrow i think this will be my final run on this anyway so i don't need to worry about bringing her out i'm just going to get into my laser here oh we're dripping fuel all right here comes some two by now thank you all right let's get a piece of one by off a piece of tube i off and we'll take a little ship board off and we'll be done all righty all right we're gonna let you go here we will talk to you here in a minute all right it is so a little bit after it's almost 12 30ish right now and i think it's beer o'clock so we cut some two by fours which is your friday eve video and uh this is just all black oak and you can see how that you can pull boards off like that you can pull boards like that on the same log they're just and the smell here right now is not that great it's it's got that real almost like almost like horse manure has that really bad smell so what do you think eddie we've got something done and it's raining it's it's pouring down rain out there right now so we're under the the roof are nice and dry uh and bus motors been slobbering more and more we're gonna have to get a mechanic to come in and find out what's yeah it's wasting a little bit of fuel we're probably [Applause] probably getting close to need an overhaul on that old girl but uh oh well it's just the way it goes but alrighty everybody hey thank you again for the subscribership uh we appreciate it everything boy that's uh 400 in a week that's that's good for us that's impressive and uh if anybody's been watching frickin jeep uh he found a bad cable on his carriage drive so he's going to get that replaced yeah i was talking him on friday or thursday night which is friday some people still don't understand that yeah buddy do you break that cable that carriage running loose well that and then the other problem is you got a uh 200 some horsepower weed rocker oh yeah yeah so you've got a weed whacker and uh you've got some really bad situation going on in your world and also say hello to nathan from out of the woods uh if you have anybody been following him he has sold his sawmill so what now what's going to happen the drama continues so and also he he's inspired me enough i'm going to turn this microphone around he has inspired me enough we got to get going on that kiln yes nathan's been trying wood we got to start trying wood so we got to get that going on too so everybody have a great week we will see you friday eve and we'll talk to you then thank you
Info
Channel: mark galicic
Views: 34,623
Rating: 4.9649267 out of 5
Keywords:
Id: qXfq9-_mRXM
Channel Id: undefined
Length: 32min 39sec (1959 seconds)
Published: Mon Jul 19 2021
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.