Samsung Galaxy S24 Ultra Whitestone Dome Glass! Fingerprint 100% WORKING!

all right so here we go with the yearly video of the Samsung Galaxy S Series Whit Stone Dome installation now I know everybody want to hear wh Stone Dome they are crazy intimidated but I got you all right I'm I got you we're going to step through it step by step video might be a little bit long but trust me at the end you will have a perfectly installed wh Stone Dome temper glass creen protector on your s24 Ultra now I've already used a few different screen protectors for the s24 ultra and guess what I tossed them all out I threw them away because none of them would work with the fingerprint scanner now his now now now history says that the white stone Dome is usually always the screen protector that I get that always solves that problem with the ultrasonic screen protector so we're not going to do a bunch of talking this video is going to be long enough let me go ahead and unbox all the content gets completely set up and then we will step through it one by one let's get to it now the first step always when it comes to wh Stone Dome is turn that device off we want to make sure that we we aren't working with any lint when it comes to these creen protectors they're not the cheapest things in the world we want to make sure we get that installation right so go ahead and turn that bad boy off now next up we want to go ahead and grab our stickers these stickers are going to cover all of the areas of the trouble areas meaning your buttons your bottom by your port and your S Pen and the sides just so you don't get any excess glue inside of those ports so that's what we want going to go ahead and do so let's go ahead and grab the first one here and we're going to go ahead and look at the top of it and what you're going to do is basically place the sticker on top and it doesn't have to be perfect all right you what you want to do is just cover up those speakers those anything that's going to be exposed you basically just want to cover that up just like that and we also going to do it on the other sides as well once again does not have to be perfect we want to just make sure we cover those buttons up also without getting too close to the edge of the edge of the actual display so make make sure you leave a little bit of room to your display just so you make sure no glue can get there or anything and also we're going to do it one time on the bottom so let's go ahead and grab one more on that bottom side start right here by the s pin and let's place it there and we basically want to just take that off and we're going to cover up the type C cover up everything like that so as you can see the top side is covered the right side over here by the buttons are covered and the bottom side this side I tend leave open because honestly there's nothing there that can get in the way of getting any glue or anything in there like that next up go ahead and grab your installation frame so basically what you want to do is grab this Frame and you basically want to find out what is the top and what is the bottom and one easy way to see it because this little top side right here is going to be the area where you actually put the little pull tool so this is the area that's going to be the top and these are the going to be the sides when it comes to the frame and basically what you want to do is insert the sponges into the frame that's going to kind of trap that excess glue when we are installing the screen protector so basically what you want to do is grab the sponge put that one right there second one goes right there and and and the last one goes right here on the bottom so make sure that they're all tucked in and you get your three sponges on the frame one two and three Slide the display to the side and let's go ahead and do our first cleaning of the actual screen itself s so of course go ahead and grab your included wet wipes and go ahead and just wipe the screen down just kind of get it as clean as you want of course mine has been used for a few days so fingerprints are all up there so let's just go ahead and give it a quick wipe down you can kind of go in the same direction I mean I don't know what's particularly correct but just give it a wipe down make sure the the the display is clean after that go ahead and grab your dry one so you can make sure you dry everything off and what I like to do is kind of give it a look over all right you can kind of give it a close look over it might might be a little bit you know you might have to go off camera somebody like myself I kind of tend to look at it a little bit just to make sure we don't have anything if we do sometimes I'll just do a little quick blow or we can get the dust remover sticker right here and we can make sure we press it so there isn't any dust particles or anything like that to be found make sure you hang on to this dust sticker because I'm guarante to you we will probably come back to it as dust May settle back on the back display itself so next thing up let's go ahead and pop the let's get this mve this to the side let's go ahead and grab the frame again we want to take this little piece right here and we're going to pop that up top when it comes to this so you want to pop that up top right here that's going to actually hold the little pivot tool that's going to pull the screen protector out right there let's go ahead and place the phone in the tray so let's go ahead and get the phone in the tray and actually you probably could have did this before you put that little tool up there either or doesn't really matter so let's go ahead and put the phone in the tray right here once again keep your eye on the display keep your eye on this screen to make sure you don't have any unwanted dust or debris on the screen next up go ahead and grab the little sticker film and we're going to slowly place the film over this little mechanism right here so you can get the little sticker film over the speaker so once you get that kind of in place go ahead and grab your little black plastic tool here and just make sure that that film is is actually down just dab it a few times press it in a few times and that's going to ensure that that little black piece of tape is actually sticking to cover that little speaker Grill after that go ahead and slide this into the actual holder itself up top go ahead and grab your bridge now let's go ahead and install that bridge before we install it let's make sure you look over your screen protector one more time to make sure there's no unwanted debris up here because your phone is sitting if you're not in a completely dust-free environment that will cause issues go ahead and place that that bridge on it like that take your glue capsule and unscrew the gray do not unscrew the black piece unscrew first the gray portion so let's unscrew that first and then we're going to put it down here on the actual frame itself so you set that down there and once you kind of looking over your screen this is going to be your last time all right this is going to be the last time this is going to be the last melon of trying to figure out to make sure there's no dust on it so basically what you want to do from here is unscrew this piece right here you're going to unscrew the black piece and when that happens it's going to drop that glue down and it will go on your actual display so let's unscrew that be very careful so once we unscrew it if your desk is not level this step will actually tell you so basically what you want to do is unscrew that and leave it just like that and kind of give it a few Taps all right so it's going to get one more big drop of that glue and normally when you get that last slow drop that is good enough you can kind of go ahead and take it off of there and remove it now next thing up let's go ahead and place down the screen protector itself so basically you want to leave that glue right there keep an eye on it make sure it's not doing any moving let's go ahead and get your screen protector take it out kind of remove the screen protector away from the glass because you don't want any debris from this to get down there so go ahead and remove the the sticker off of the actual glass itself which is very tough and now we want to go ahead and place this screen protector in the actual frame itself don't worry about it once you get it all lined up it will rest on the actual Bridge right here so it's not actually on the display next thing up that we're going to do is we're going to go ahead and get our weight all right let's first things first let's go ahead and move this glue down to the center a little bit so you're going to have to kind of maneuver it to get that glue to come down to that center of the ACT actual display so let's move it a little bit and once it gets right there we want to basically place and let me see if I can get it a little bit more we want to place that weight down there and we basically want to pull so let's go ahead and make sure everything is straight and basically pull it out and let the glue do its thing the glue is going to do its thing let it sit here for a few seconds because it's all going to just disperse all throughout the display and when it all gets where it got to go we going to come right back all right so that took a good little minute now let's go ahead and remove the weight and now what you want to do is go ahead and grab your UV light now Whit Stone Dome you used to include the type-c cable I don't see a type-c cable in my packaging so basically what you want to do just grab your a type-c cable plug it in as you see here one click is 15 seconds two click is 30 seconds for right now we're going to do one click for each three sections the bottom middle and the top all that's done now let's go ahead and set this to the side don't put it too far because we will be coming back to that right there now is going to be the time where you want to basically take the phone out of the frame itself so the first things first let's go ahead and remove the speaker Grill which is right there and what we can do now is gently don't press like a mad man but gently just push in the corners and let it slowly pop itself out you don't want to push too hard because sometimes that can cause a little bit of stress fractures when it comes around the actual screen protector now one thing that I like do is I keep I keep Electronics wipes and basically what you want to do and you can use the other wet wipe that's actually in the packaging this is the time that you want to clean up that excess so basically what you want to do next is go ahead and take all of these stickers off so we can go ahead and get this sticker here take that off the top sticker off here peel that sticker off and now what we want to do is go ahead and clean up any excess glue so I just tend to give it a quick wipe on all the sides over here by the top speaker anywhere that ex excess glue could have potentially got into the little grooves that's basically what you want to do everything seems pretty good to me right there now last cure is about to take place last cure is about to take place but one thing that I kind of like to do beforehand is kind of give it a little hard press over here right where that fingerprint scanner would be kind of give it a little hard press kind of rub your hand over it a few times because you really want to make sure this area is really secure down good because this is where your fingerprint scanner is going to be and you want to make sure you get the perfect accuracy when it comes to the fingerprint scanner so I just kind of leave my finger here for a few seconds press down on it so it can actually go ahead and adhere and and this is an extra step this is a little little sneak tip you know right one white Stone D you might need to make this little tip more so than just to wait put your pressure on this little area right here so you can get that best performance you can get out of that fingerprint scanner so just press down don't do it a lot but just press down around these areas I could be a little bit High I could be a little bit low but just press down and I think you will be good to go now last curing is about to take place we want to go ahead and do 30 seconds for all of the actual sides so let's go ahead and get to it all right so that is finally done and basically you want to give it one more wipe down all right let's give it one more wipe down you can tell some little excess glue could be on it potentially somewhere but one last wipe down and basically what you get is going to be an absolutely perfectly absolutely perfectly installed White Stone Dome tempered glass screen protector so basically what I'm going to do do now is I'm going to go ahead and power this bad boy on and we will get to re-register my fingerprints and I do want to prove to you that the fingerprint scanner works just fine all right so there's a few settings that you want to go and change before you actually get to that so basically what we want to do is we want to go to the settings we want to scroll down up hdden stuff you want to go down to display and you do want to turn in touch sensitivity turn that touch sensitivity on so basically turn that on that's going to help you a lot when it gets to your screen protectors next up let's go ahead and type in biometrics and we're going to go to fingerprints right here and basically actually we're going to go to Biometrics right there F not face recognition fingerprints and let me go ahead and pop my code in and now we want to go ahead and register the fingerprint so let's go ahead and register them you can see right there registering you know once again you got to move around press a little bit you ain't even got to press that hard see I'm barely hitting it and it's actually registering pretty good no issues really when it comes to registering so that was it right there let's go ahead and add my other finger once I get it up there right I should have cleaned my display off a little bit but we are adding the fingerprint scanner there we go boom boom One More Time One More Time Boom there we go so we're going to go to done and now we're g to go ahead and test it out so we're gonna go ahead and pop that off and we're going to go from the always on display and hitting it and as you can see it works just fine speed is very fast there is no issues with it speed is just like it would be any other time even if you did not have a tempered glass screen protector up there so all of that works perfectly fine you see that let's go ahead and pull the SP pen out in case any of you guys want to say that the SP pen May potentially not work um SP pin works just fine if you can see that right there not a single issue when it comes to the Spen so that's going to be it that is the Whit Stone Dome temperate glass screen protector I am aware that Samsung has that anti-reflective coat but you got to kind of take it and figure out which one you want do you want that anti-reflective coat or do you want to keep your phone display in pristin condition me in my opinion I love the anti-reflective display but I want to keep my display absolutely as Crystal Clean as possible and with my fingerprint scaring to work and that's exactly what the white stone Dome does so go ahead order you one with the link down below make sure you watch this video a few times before you tackle yours but I'm telling you if you follow my steps you will have a perfect installation of the wh Stone Dome tempered glass screen protector

Channel: TechnicallyTee

Views: 20,696

Keywords: s24 ultra screen protector, samsung galaxy s24 ultra screen protector, best s24 ultra screen protector, best samsung galaxy s24 ultra screen protector, s24 ultra whitestone dome, s24 ultra whitestone dome glass, s24 ultra whitestone dome glass screen protector, samsung galaxy s24 ultra whitestone dome glass, whitestone dome, whitestone. dome glass, whitestone dome s24 ultra, whitestone dome glass s24 ultra, s24 ultra whitestone

Id: yX5Ff_k7Gps

Length: 14min 41sec (881 seconds)

Published: Wed Jan 31 2024