Replacing a Signia/Siemens Receiver

All right so here we've got the Siemens Pure, and what we're going to do today show you how to replace the receiver. So what we'll need to do is locate that pin on the side so we've got a round pin there and a triangular pin on the other. What you want to try find is the circular pin located right here. Now what you will need is the device to remove the receiver. Now as you can see at the top we've got the pin right there. Now what we'll need to do is place that pin inside, now that will push out the triangular pin on the other side. Essentially you pull that down and out that comes. Grab the new speaker and what you want to do is match that in the bottom first, push up and place your thumb against the check mark and place or push that pin into place. We give that a firm tug that receiver is nice and firm. For any questions or queries you can reach us at valuehearing.com.au Thanks for watching.

Channel: Value Hearing

Views: 29,762

Rating: 4.7557254 out of 5

Keywords: Signia, Siemens, Receiver, Speaker, Replacing, changing, value hearing

Id: AnO7xms2p90

Length: 1min 55sec (115 seconds)

Published: Tue May 16 2017