Rebuilding A Wrecked Lamborghini Urus Part 16!!!

all right we got a perfect trade right here the 67 Camaro for this Whipple [Music] welcome back to the channel so today we are here at the new goonscar garage and today we're going to continue working on the Lamborghini Euros project and as you guys seen in the previous video we started working on that interior we got it as much as we possibly could basically now what we have to do is just a little bit of Bodywork and pretty much just prep that sucker for paint so I really don't know if we're gonna work on it on the frame machine because we still don't have a key we can't drive it off and we really can't roll it off because the steering wheel is locked into place so we can only go about that way right there you'll probably turn straight towards the wall so we got to figure something we gotta figure something out I know another solution would be to just bring in the skid steer and just Fork it straight off and maybe place it right here on the wheel dollies and roll it around and just do what we need to do because we got to mainly work on the roof but we're gonna figure that out a little bit later right now what we're gonna do is go ahead and fire this Camaro up right here this 1967 Chevrolet Camaro with an lt4 engine let me pop this sucker open for you guys and look at that right there if you forgot hey mine that's clean that is so clean right there but you know what this sucker does need a lot of love it does need a lot of tuning up because it doesn't run like we want it to this is a 650 horsepower motor right here on a pretty light car it should be putting down like some absolute power and it should just be zooming by you know what I mean yes and we want to zoom by and comfort and and uh and just good handling and just have everything right now it does not handle like we want it to so we're going to take it to a shop they're going to do the coilover conversion in the rear they're going to tune it up a little bit and we're going to get it back and we're gonna wrap it around for you guys rip around and then we got a few more things that are coming like a brake booster we did mention we definitely need one because you got to put the Boost with your leg right now dude dude I'm telling you but anyways I guess let's just go ahead and take that sucker over there rip rip down there get back over here and get back to work on this Lamborghini Urus foreign [Music] foreign [Music] we got a perfect trade right here the 67 Camaro for this Whipple supercharger buggy right here this thing's a beast oh my gosh we ought to get one of these dude dude I don't know man I'd this thing's just insane looking dude imagine bouncing up some Cliffs dude look at these tires oh my gosh dude those are diggers right there dude wow dude I wonder what kind of motor that is looks like a LS or a hammer block LS wow dude wait dude how are you supposed to drop how you drive with the wrench an adjustable wrench dude this thing is sick dude this is a wig is this Roost here I don't think this is just it's just regular I bet this thing gets Rowdy oh man look at the coilovers on this sucker dude do the coilovers look at the control arms they're as big as the drive shafts now yeah I know right I think these are aluminum too it's kind of what it looks like chromoly maybe maybe a while ago that's normal right there part of dude Rock bouncing look at this rear control arm that's insane dude I bet this thing's been up some hills dude yeah dude this thing is a beast that axle is beefed up maybe one day we'll get us one of these yeah I think there's one for sale actually down the road we ought to go check it out right dude for sure dude what do you think of it lt4 no go ahead yeah and I messed up about eight years ago foreign guys so we just went down the road where that buggy is actually at and we didn't get a chance to look at it but we found it on Facebook yeah we found it we're gonna take a look at it on the images and see what it's all about I mean it's just it's just something that would be pretty sick to look I got it right here pulled up on my phone but I'm gonna keep it a secret because you guys are gonna want it yeah dude it might be an absolute beast but who knows we couldn't make something happen man what if we trade the Camaro for it I don't know about trade I'm not huge on trading I think I think right yeah yeah you just rip it up the mountain that'd be insane we definitely have to take a look at it for sure for sure but anyways we also took a look at a metal building that we might build over there 100 because we always wanted to do an add-on you know I mean we have room to do add-ons so we may end up doing an add-on and even having a place to put a brand new paint booth inside uh our property that way we have everything and that's not too bad it's around 20K for uh 20 uh 30 by 40 right which is pretty big right that's huge just as just as big as that parking lot is and that's exactly what we want and just have a whole separate like Warehouse basically yeah whole separate Warehouse maybe somewhere we can we can store our paint booth you know what I mean yeah because that's the next major thing is a paint booth to our whole entire facility yes sir foreign [Music] [Music] thank you [Music] alrighty guys so check this out we finally got this Lamborghini Urus off of that frame machine with the skid steer and look how good this thing looks sitting super low man dude it's not even all the way too that's true because it's on the wheel dollies right here so this sucker is going to sit really low but then again it also does have the airbags so it's going to lift up I wonder how high this thing goes dude that's what I'm wondering I believe it's on the lowest setting right now because it's super close in the back but I wonder if you can adjust whatever ride height dude I think you can actually I've seen a couple videos and I believe in that little panel in there you can adjust depending on the terrain that you're about to hit off-road dude probably lift up I wonder how high I'll lift up we'll all find out when the key comes in we will find out here really soon but as right now this sucker is bagged out like that 370Z over there dude that don't even talk about that car dude anyways come over here guys we finally started our body work and we really don't have too much because of course we replaced this whole entire side and that was the purpose of doing that that way we could reduce the body work that we do and we started right here in this roof line right here which is really important really tough to get because you're basically like doing some art right here you got to form it with your finger because we threw like we sanded the panel Bond off then we threw the body filler and then we spread the body filler with your finger we were actually debating on whose finger we should use to actually get it perfect you know I got the good like round thumb right the Lamborghini fingers right there so you got it nice and smooth sanded it down and it looks pretty much original original Dude absolutely would never tell the difference but once it's painted dude it's going to look good eat even if we go with the black roof that would be pretty soon 100 and the new Lamborghini I think uruses actually have carbon fiber roof but no sunroof dude that's insane man honestly if we could have gotten a carbon fiber roof I don't think you can even probably order it yet yeah I don't think so so that was just something that came to mind when we were talking about this roof right right here but anyways same thing on that side over there we're probably about to knock that out right quick and then we can pretty much get ready for some primer and then I think or we do got some more Bodywork on that side I'll leave that passenger door and that Fender is gonna have to have some body work and that's pretty much it I believe that's all the body weight maybe the hood has a little ding in it if I'm not mistaken we'll have to fix that no just little things little just miscellaneous things but you know what before you know it we're going to be sending this whole entire thing and hopefully get this thing painted [Music] thank you [Music] alrighty guys so it is the next day here and we're almost ready to get most of these uh seams of the roof primed yep but we just got a phone call from Pops and somebody's walking down the road who is he said I think a UPS driver from California I see him actually on the camera so pop said he wants to take a picture so I guess we'll go take a picture with it that's crazy we don't do this all the time because UPS drivers because those are the real not FedEx no FedEx drivers so I'm just kidding hey what's up man my God my son's not gonna believe this where are you from California really uh I'm a truck driver I work for UPS so I picked up a load in uh in Atlanta to Utah so you know just we're fanatical here guys you know I mean let's let's take a Simon Says lucky for me and one morning I walked in there and uh he was watching it and I sat down with him and then you know it became a tradition to uh because I'm on the road all week yeah so Saturday mornings when we wake up we watch the episode for Tuesday and Thursday we're not allowed to see them by ourselves oh wow and then Sunday morning when we wake up we see the Sunday yeah so we're we're literally like cracking when you guys don't put it you guys took application yeah what are we gonna do now it's a tradition you know sorry about that but his name is Aiden Adrian missed out you should have came with your pops oh yeah Adrian come on out don't usually do that only for UPS drivers remember that FedEx you guys just gotta Zoom by no we're totally kidding but it's just a once uh very rare will we actually go to the gate because uh you know we're so busy it's just like this was just one of those opportunities where we kind of paused for a second but most of the time somebody stops over there we kind of just keep on working because we're in the middle of filming so hope you guys understand let's get back to the series [Music] thank you [Music] foreign [Music] [Music] [Music] all right guys so we just finished up our body work up on this roof right here and look how amazing that looks right there we threw down the primer right there and all this really left is just a wet sand and then wet sand the whole entire car and paint that sucker right there exactly right other than a few things that we have over there this was just the main body work right here but you know what we got the perfect thing for the rest of those dents because look at this we just got a care package from dip fix and this right here is an aluminum Repair Station called the value spot or something like that df900dx this thing is absolutely insane we're gonna go ahead and crack it open and kind of just show you guys what we got in here so apparently I guess you just weld like some aluminum studs into the aluminum uh pieces right there and then you use this gun right here to kind of massage it because aluminum you can't just pull it you got to massage that stuff out you know what I mean exactly right we got like a few different types of those we even got a heat gun on this station right here to heat up the aluminum dude this thing has it all 100 percent ready to pull out any dent in aluminum dude I'm telling you this is not your just ordinary heat gun right here this sucker is nice heavy duty high quality so got a bunch of settings right here because with aluminum you got to heat it up to the perfect temperature or you might just risk damaging something Beyond repair you know what I mean you got that right so you've got to be very careful and of course look at this Beast right here so this thing right here is what's going to weld most of the tabs up to it and it's just going to create a whole different ballgame for us exactly this right here looks like it's something from outer space from some sort of space station dude that's a Star Trek gun right there I'm telling you right there but look at these little uh studs right here this is ALU silicone so this has aluminum and silicone in it I'm guessing I don't know how they're made but you know what those are gonna be super awesome to experience and finally give it a shot at aluminum repairs dude this is going to be amazing we've got about 500 of those which is plenty enough for a very long time that is so awesome dude we've been needing an aluminum repair kit for the longest time because I think the way that we used to do it is like kind of weld to it or how do we even use it honestly we don't we didn't really repair aluminum it took us like if it was super difficult we would just replace the panel yeah but this is is going to let us save a bunch of money on repairing it instead of buying new dude 100 a bunch of money and a bunch of time honestly I feel like with this kit so this is our plan was to use this kit to repair the damage and Urus right there across the top and just kind of pull everything out but of course we ended up swapping out the whole entire side the whole entire quarter panel piece but let's keep moving here let's see what we got in here look at that dude what this is just all the dollies that you need and look at this a plastic I don't even know what you call it's a plastic like wedge tool or something yeah you can use that to just hammer on a few dents and stuff like that so there's a bunch of different types of stuff we're definitely gonna have to watch a few videos and I mean this is all stuff this is just aluminum repair type of stuff right here we're not used to it so we're gonna get too used to it yeah so this is like very like soft stuff that way you're not damaging stuff you know excessively so plastic against aluminum is just the perfect thing this right here I think this is some sort of great type of thing to like shred down some aluminum or something I think that's actually for you can shred down the studs that you weld onto it you know if there's like a little piece left I don't know we're still gonna don't quote me on that we're gonna have to figure all that out but it has everything even the second drawer go ahead pop that sucker open got the look at this and I found the perfect tool for you sir that right there is the perfect little fixer dude that is awesome you definitely need something like this of course I think it's Rubber and you can just tap stuff clean out and we're gonna put this to the test because this right here is going to help us repair the last of the damages on this Lamborghini Urus we got some damage on the fender and the door we're going to show you guys here in a little bit but look at all these hammers dude I'm telling you this is like you know we have these hammers right here but this one feels high quality feels perfect I mean look at that flip it just flips good flip dude right there of course we got a thermometer gun right here bang got to keep the temperature of that aluminum at a certain temperature that is right they're definitely going to use that a lot let's see what we got down here just like some random miscellaneous stuff you got like a wire brush right there and this right here is like one of those Pooler what do you call this like a puller arm or something like that yeah that's what you're going to use to lever some some bigger uh dance out and stuff like that that thing is to get like line dense out you know what I mean like if there's like a line in it and you're trying to pull it out you put a bunch of different tabs on this piece right here weld them on and that'll pull it all out that's like to form a body liners yes sir that is absolutely insane and look at these tips right here this is to throw onto your heat gun that way you get that air flowing exactly where you need it not all over the place you got that right dude that is just super awesome right there and a few other cool tools that we're gonna put to the test in the future but huge shout out to dentfix equipment for just coming through and helping us repair this stuff with speed so let's just go over here and show you guys exactly what we're gonna probably test out so we got this Fender right here we're definitely saving this Fender because I believe one Fender is like what three grand three to four thousand dollars yeah pretty expensive so we're definitely gonna save that and then I think there's a little ding right here it's gonna be hard to see but that is the perfect Dent right there to put this sucker to the test dude dude perfect so there's a few of them over here and we're definitely gonna once we get good on that thing I'm telling you ain't nothing stopping us I am telling you so I'm super excited to have that right there let's just go ahead and put that sucker to the test foreign [Music] [Music] foreign [Music] [Music] [Music] dude absolute Beast right here oh my goodness this right here is just a game changer we just tested it out on this door and dude how easy was that dude it was pretty simple I mean for the most part we just didn't even read instructions and we got right to it and we just messed around with it a little bit and we got these dents out dude look at that that is perfectly smooth right there I don't know how else we would be able to get these out I don't think you can get them from the inside honestly you'd have to just Bodywork them suckers if you if you can't get to them but for the aluminum thing I never thought this even existed you know so this these little studs that just weld right to it which those things are just I mean this is just insane to use this thing how cool was it when you actually like actually use this gun right here it just kind of like shoots the stud out yeah it like zaps it right in like a split second then you can go ahead and put you put your tools on whatever tool you want to use I was using this one in this one this one's super simple you literally put it on there and pull it out and no problems dude I'm telling you dude that was so awesome right there we just got a little bit more where we're gonna use that machine probably in this section might be a little tough but with that machine right there dude it's gonna make it easy we'll figure this sucker out got a heat gun right here and you did figure out that you have to actually heat it up which it worked really well after we heated it actually the damage came out way better yeah I think around 500 degrees Fahrenheit dude them dense just pretty much just worked themselves out so that's how pretty much all of our body work right here and a little bit on the hood and I think uh then we're going to be able to wet sand the whole entire car dude after we get this sucker finished up and fixed up right here we'll sand this whole entire thing down and probably paint the whole car dude but guys that's pretty much gonna be a wrap for today's video we're super happy with these tools right here just an absolute amazing experience working with this stuff and as for the next video definitely going to finish up all the Body Works try to sand the whole entire thing and figure out exactly how we're gonna paint this thing because there is some body panels that may not need paint but since we are painting the majority of the car we might just go ahead and paint that stuff but you know what you guys are gonna have to stay tuned definitely drop all your comments and thoughts down below we'll catch you guys next time peace foreign [Music]

Channel: goonzquad

Views: 632,579

Keywords: rebuilding a wrecked Lamborghini urus, rebuilding a wrecked 2019 Lamborghini urus, rebuilding a wrecked urus, wrecked urus rebuild, wrecked Lamborghini urus, goonzquad urus, goonzquad Lamborghini, rebuilding a wrecked car, salvaged Lamborghini

Id: EUeB2QSZMf4

Length: 21min 32sec (1292 seconds)

Published: Thu Jan 26 2023