Processor Installation in a LGA1150 Socket | Intel

this video will cover how do we an Intel box processor and thermal solution in an LG a1 five zero socket first let's look at what comes in an Intel box processor packaged box processors typically contain the processor thermal solution and product manual and every in toebox processor is backed by Intel's three-year limited warranty and technical support now let's talk about some of the things to be aware of before the actual installation process prior to installation it is a good idea to capture the processor markings in case you ever need to contact Intel customer support looking at the i-5 for 570s processor topside here are the lines that are important to capture the Intel processor number the processor aspect number and CPU speed the finished process order a partial assembly test process order it is also a good idea to record the intel part number a manufacturer line of the thermal solution once the processor is removed from the protective clamshell don't touch the bottom side contacts or components grip the processor by the edges leave the productive covers the board socket until the processors installed if you do remove the cap be very careful never to touch the socket pins as this could damage the board before installing the thermal solution make sure all four fasteners are in the correct position they should be in the full clockwise position and when handling the thermal solution be careful not to disturb the pre-applied thermal interface material on the other side now it's time to prepare the desktop board for the processor installation the first step is to grab their attention handle and push it down and move it out to release the cover and move to handle back until the top plate is fully open now let's install the processor into socket open the clamshell the processor came in and grabbed a processor by the edges and lift the processor out locate the pin1 indicator on the board and match it with the pin1 indicator on the processor along with the keying features or notches once you line these up gently lower the processor in a vertical motion into the socket take care not to insert the processor at an angle since this may damage the socket pins once the processor is properly seated flush to the socket close the top plate making sure it goes under the post then latch the locking lever to complete the processor installation the protective cap should disengage once this action is done if it doesn't gently remove it now the board is ready for the thermal solution to be installed position the thermal solution so that the fasteners align with the board openings making sure that the fan cable will reach the connector on the board installing the fasteners in a crisscross pattern is recommended push down on the first fastener until it locks into place then do the same for the opposite fastener until all four fasteners are locked in place then attach the power cable from the thermal solution to the connector on the motherboard this completes the installation it is a good idea to keep the processor clamshell and board socket protective cap in the event you ever need to transport either item thank you for watching this video for more information log on to www.mptv.org/outdoorwisconsin [Music]

Channel: Intel

Views: 152,347

Keywords: Intel, Jim Parsons, Internet of Things, iot, Intel edison, computer, video, company, innovation, computer hardware, official, channel, tech, technology, mobile, semiconductor, processors, blutetooth, flash memory, microprocessors, interface cards, PCprocessor, integration, lga, lga1150, socket, how to, 3d, pnp, animation, thermal, intel, yt:cc=on

Id: q_EMqmJRFW4

Length: 4min 37sec (277 seconds)

Published: Fri Jun 27 2014