장인이 만드는 세상 단 하나의 나무 테이블! 한국의 레진 테이블 제작 과정 / Amazing Korean resin table manufacturing process

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
Hello, this is FactoryTrip :) Today I went back to the workshop where I made wood slabs last time. The artist is working hard to create the world's only wooden work with a unique tree. Today, we'll take a look at the process of making the world's one and only resin table with Maple wood. He always carries out the work alone, so he can carry heavy wood well. Measure and cut the wood to the size of the table. After cutting the wood, grind the wood surface to a smooth surface. Change the machine to grind the wood surface to perfection. It does the job of leveling the tree. Place the wood on a flat surface and keep grinding until it is level. Do this on both the top and bottom sides to level the table. Grind the rough wooden surface with sandpaper. Sprinkle water so that the rough side rises. Grind the rough side of the wood once more. Smooth even the smallest details with hand sandpaper. Clean up wood shavings. Apply the resin to the wooden surface. There are many small holes in the tree, so you need to apply resin first to block the pores to minimize the occurrence of air bubbles. Apply meticulously. The table frame is made according to the size of the tree. Frame the cut wood. Remove any dust or foreign matter. Seal every corner of the table frame with silicone. Put the tree well in the frame. When the resin is poured into the mold, it creates the necessary support. Apply tape to prevent the resin from sticking. When the resin is poured and hardened, there are parts where the wood can float or deform, so it raises the support. Mix the main agent and hardener to make a resin for the table. Pour the resin into the mold. The working time for resin work varies depending on the season, but the work is usually carried out for a week. Eliminates air bubbles. Air bubbles are generated in the hole, and the resin is filled by pouring the resin and removing the air bubbles alternately. Result after a week Once the resin has hardened, remove the mold. It does a leveling job. After separating the lower shaving frame from the frame, level it. Check a hole in the leveled table surface. Pour resin into the wood hole to seal the hole. Because the wood has many holes, he continue to pour resin to seal the holes and grind. Tidy up the edges of the table. Angle the corners of the table. After that, grind the surface smoothly from 80 to 3000 grit sandpaper. Clean the table with water. Grind the table surface with 3000 grit sandpaper. Table polishing in progress. First, give a rough gloss. Gives a second shine. Wipe well with a dry towel. Finally, he proceed with the oil work. When the oil dries, the table is complete. Thank you for watching so far. See you next time with a fun manufacturing video :)
Info
Channel: FactoryTrip
Views: 655,680
Rating: undefined out of 5
Keywords: 공장, 제조, 과정, 제조 과정, 제조 공정, 제조업, 산업, factory, process, plant, workshop, master, tehdas, 대량 생산, manufacturing process, عملية التصنيع, 制造工艺, 製造工藝, výrobní proces, fremstillingsproces, productieproces, tootmisprotsess, proseso ng pagmamanupaktura, valmistusprosessi, processus de fabrication, Herstellungsverfahren, διαδικασία παραγωγής, תהליך ייצור, proceso de manufactura, 製造プロセス, processo di produzione, fabbrica, 工場, fábrica, fabrikk, nhà máy, โรงงาน, фабрика, továreň, fabrik, fabrika, rūpnīca, gamykla, usine, Fabrik
Id: PsTCQT1R9bU
Channel Id: undefined
Length: 24min 45sec (1485 seconds)
Published: Mon Oct 17 2022
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.