Mikrotik Router VLAN Configuration step by step

[Music] hi everyone welcome back to my video okay so mag router I hope uh everyone uh know about this uh mag router okay anyway so today topic we will discuss more on this uh micro router and micro switch okay so if you are new here watching my video please uh subscribe to my channel and don't forget to give the thumbs up if uh you like my video okay so uh today topic we will discuss more on uh magnetic router uh we will do the uh router on the stick configuration okay so we will have a we land configuration on magnetic router and step by step creating V on itic switch and uh apply the ACP server to our client in our Network okay let's go to the gns3 lab together and we will go step by step for all this router on the stick configuration okay this is our GS3 lab we start uh with uh micro router okay I have Micro router here and then uh I have a micro type switch so I want to have uh three mro switch okay and then I want to have uh my internet Cloud PC okay so PC I want to uh duplicate okay so I have connection [Music] [Music] okay so this is we have three V land here I will I will uh create 3v land so we have v l 10 192 168 10.1 okay and then I copy pass F 20 okay and we Lear 30 okay so we have three v l here uh [Music] okay 20 okay 20 and then this one will be ke Okay so let's start with our micro router okay so I start okay so please wait for a moment our mtic router is starting up okay so now uh first loog in our username is uh admin password without password we enter and then this one no and it required to create a new password I put uh admin the same okay so now I want to check uh my IP address so IP address okay so this one uh my IP address on this uh interface okay I so [Music] okay um as you can see this is the EET one and IP address is here so uh is anet one we have IP address that get uh the ACP IP from our Cloud here so okay so now I want to bring my mic [Music] uh router configuration on this uh win box so our IP address is uh okay 98 username admin password admin we connect okay so now we we are on winbox so uh we go to interface EET one this one it will be our when okay our when this one our local okay so now our purpose is that we want to configure this 3v L on micro router okay so I go to here interface VLAN we have a VLAN 10 uh V ID 10 and then interface we want to select EET tool look call interface okay uh copy this will be V 20 and then this freand ID 20 okay apply copy freance this one V 30 okay so apply okay okay okay so now we have uh create 3v L and uh this uh uh iset tool here so uh you also can see the VL tab here okay we have three VL so after we create uh our vland we uh go to IP address and then we create our Network for each whe okay so this one it will be VL 10 okay and then we 20 okay and then we l 30 okay apply okay okay okay so now we have uh uh three Network address for our V okay V 10 20 C so I go to here IP address I want to add my default route to our in Internet this is my uh IP add address of my Wi-Fi router okay okay so now we we already have a 3v land with uh uh Network here and then we configure uh the HP server for our VLAN here okay IP the HP server okay so the HP set up I I select uh we 10 okay just click next next next next next okay then V land 20 next next next next okay freelancer T okay so now we are done on uh this uh uh micro router we continue to this uh uh we continue to this uh switch micro switch here so we start our micr switch and uh we will use this uh router to remote to this uh uh micro switch by using a m micro tool it called uh Roman so you go to here tool and then Roman here you enable it okay so after that okay I make it smaller this one okay and then we open up this uh console so we are on this uh switch first log in the same use uh admin without password and require password I put admin okay so you go to Tool uh and then Roman uh and then we want to enable the Roman so uh to yes okay so this is we enable this uh tool by using this command because uh we cannot uh loog in by uh wind box at the first time so we need uh this command okay after that we we open up our win box and then we connect to Roman here okay connect to Roman after that it will search and find this uh uh my address so we click on it and then we put our username admin we connect okay so now we are connecting the uh this switch using the Roman service from this uh um micro router okay so let's see we [Music] uh okay let's see now this one is uh uh okay now this one is our router uh IP address we log in by this IP address and we have 3v L here okay so we we we want to configure our uh V here on this uh uh switch and then on this switch as well so we we go to bridge here we want to create one Bridge okay so now we have one Bridge we want to add the port the active Port that uh we use on this switch so we have EET one two and three and this one two and three is the TR Port okay so we go to part here we add EET one okay apply okay and then [Music] um is to apply okay and then e three apply okay okay so after that uh we go to v l uh so v l we have uh v l 10 uh uh tag part we have uh EET one EET 2 and then EET 3 okay so we want to copy and then we have V 20 okay samsing v l okay so now we have uh uh 3v L here uh on this switch we want to continue to this uh switch again weart okay wait for a moment the our switch is starting up username admin without password no okay so we go to Tool Roman set en yes okay and then we open up we want to connect to Roman okay so this is uh our new Switch here okay so we connect we go to interface here we have uh all the interface so for this switch uh this interface is the TR Port this is the access part okay uh same sing we create one Bridge apply okay and then P so P our Port here is net one uh okay this is the TR Port apply uh is a net to okay iset tool here so we go to vland tab EET to we want to assign to v l 10 okay so we uh tape in our vland ID here okay apply and then I copy EET three this is will be we and 20 okay apply copy iset for okay this will be vland 30 okay apply okay so as you can see here EET one is the transport the we Le ID we keep as default and iset to here VL 10 okay v l 20 v l 30 okay so now we go to here we create our VL VL 10 t t it mean transport okay so uh for Cisco term uh Cisco use TR and access but for micro it use a tack okay T it mean transport and untack it will be uh V 10 is is an net to okay apply copy and then we have uh V 20 okay same thing T is EET one and then V 20 is EET 3 apply copy v c isn't it for apply okay okay okay so now we already configure on this uh switch so uh uh let continue to this switch okay we start our switch here and then we open up our console okay okay first time loog in is admin uh without password okay okay so new password admin admin tool Roman set enable yes okay we open up another win box connect to Romans so let me check I am confused what is the my address 003 okay 0 03 1 03 okay this is the new new Switch here okay connect [Music] okay okay Sam saying we follow this uh switch configuration we go to here one we have we have another 30 okay okay okay okay so now the same thing we have we 10 20 30 okay and then we create v l here VL 10 okay we have on and then on is okay so now we are done creating V land and then uh in order to make our V uh successfully we need to go back to okay uh my switch okay okay we go to switch here we click on the bridge and then we go to VLAN here we enable this VLAN filter apply okay same thing for this uh switch vand filter apply okay and then another switch here okay Bridge V filter apply okay so now we are successfully create the vland on this switch we try to test our vland this is VLAN 10 this is V 20 V 30 let's check I try to close all this uh router okay IP DHCP okay this is V 10 correct pc1 let's try to check on PC 2 okay also correct so it mean that our configuration is uh successfully on uh micro router and uh micro switch uh for this uh interv land routing so we can call it uh router on a stick for this interv land rod thing okay so let's try to Ping to relent 10 okay can so let's try to open up from this side pc5 pc5 okay can pc6 V 30 okay ping 10 we can p ping 20 we can p okay so now now our V successfully uh configure on M router and M switch let try to Ping uh youtube.com Okay we cannot ping youtube.com because uh we not yet configure our n on this uh micro if you want to allow your client to access the internet you need to go back to this uh main router here main router here okay we go to I close this one we go to IP five allall not we go to uh this m sare okay apply okay so after that you try to Ping YouTube okay so now our client can access to Internet okay I try to Ping from pc1 ping uh google.com Okay can ping okay so uh now as you can see uh we have uh successfully configure uh our vand on this microtic router and uh configure TR port and access port as uh uh we do and uh go through together on mictic switch that uh we use uh Tack and untack part in this microtic okay so I hope you understand how to configure on uh uh magnetic router and mtic switch for for we configuration if uh you have any question please uh comment below in my video and I see you with my next video thank you

Channel: TAN Kirivann

Views: 231

Keywords: Tan Kirivann, Mikrotik, Mikrotik router, mikrotik router vlan configuratin step by step, Configure inter-VLAN routing using mikrotik router, how to create sub interface mikrotik router, how to configure router on a stick, inter vlan mikrotik, GNS3, mikrotik CRS328-24P-4S, mikrotik CCR1036-8G-2S, Mikrotik filter rule, how to configure DHCP Server for vlan, DHCP Server for VLAN, routing, Networking, ccna, cisco, gns3 vm, interface vlan routing, switching

Id: a35qVzRQos0

Length: 27min 41sec (1661 seconds)

Published: Sun Mar 10 2024