Lathe Operations (Animation)

facing operation in this video we will discuss the facing operation in the lather [Music] facing is an operation which produces flat surfaces facing tool work piece chuck [Music] in this operation the tool is fed at right angles to the axis of the work piece it reduces the length of the workpiece various types of lathe operation we'll discuss in the next videos turning operation in this video we will discuss the turning operation of the lathe [Music] learning is the machining operation in which excess material is removed by rotating the work piece against a cutting tool workpiece tool [Music] feed that is f [Music] depth of cut [Music] knurling operation in this video we will discuss about knurling operation in the lathe [Music] it is the process of indentation of various forms on cylindrical surfaces knurling tool work piece a null tool is held in tool post and pressed against the rotating work [Music] it is done to provide grip on holders and screw heads grooving in this video we are going to see about grooving operation grooving is also known as processing undercutting or necking consider a work piece held in lathe the grooving tool is fed crosswise against the rotating work piece a group is the location of an indentation in the part this indentation can be square round or angular in the shape the function of a group is usually to allow room for a fitting part such as a rubber o-ring [Music] it could also be the place where another part fits into this part [Music] grooves also provide a relief in the back side of a thread that the thread terminates [Music] drilling in this video we will discuss the drilling operation of the lathe it is the process of making holes on workpiece the drill is fed slowly into the work piece which is revolving in a chuck chuck work piece drill tool the drill is held stationary in the tail stock [Music] [Music] spindle [Music] dreaming in this video we are going to see about reaming [Music] reaming is the operation of finishing and sizing a hole which has been previously drilled or bored consider a work piece held in lathe the tool used is called reamer which has multiple cutting edges the reamer is held on the tail stock spindle either direct or through a drilled chuck and is held stationary while the workers revolved at a very slow speed the feed varies from 0.5 to 2 millimeter per revolution hence reaming is done [Music] boring operation in this video we will discuss the boring operation on the lathe [Music] boring is the operation of enlarging the previously drilled hole with the aid of single point cutting tool called boring tool work piece boring tool [Music] if the hole is enlarged only through a certain length then it is referred as counter boring if the tool is feed at an angle to the axis of rotation it is called internal tapper turning enlarged hole [Music] parting up in this video we will discuss the parting of operation on the lathe [Music] work piece cutting off rule parting off is the operation of separating the finished workpiece from a bar stop the operation involves feeding the cutting tool into the rotating workpiece

Channel: AniMech

Views: 59,479

Rating: 4.9217529 out of 5

Keywords: e4education, Lathe Operations, Facing, Turning, Knurling, Grooving, Drilling, Reaming, Boring, PartingOff

Id: hheFVuUBpxo

Length: 6min 44sec (404 seconds)

Published: Mon Feb 01 2021