Intel® Wireless Display Setup and First Time Use | Intel

hey there if you're watching this then you've either just purchased a new pc with intel wireless display or you've finally decided to get the tv adapter and set wireless display up on your home tv either way congratulations wireless display or wide eye is a terrific feature that's really going to make your pc experience come alive but before you can enjoy wide eye you have to get it set up let's get to it first let's start with an easy one find the power cord that plugs into the wall and attach the other end of that cord into the tv adapter then you can plug it into the wall next it's time to attach your tv adapter to your tv now there are three ways to do this each tv is a bit different so let's go over all of them the first way is with an hdmi cable these cables have flat ends that look like trapezoids one end goes into your adapter and the other end goes into your tvs hdmi input now if you can this is the best way to go since an hdmi connection can deliver both video and audio in a single cable with exceptional quality if not you can use analog cables these are the red white and yellow cables that you've likely seen many times before hook them up matching color to color on both ends lastly if your system has digital audio you can use the digital optical audio connector these are skinny cables that have tiny square shapes on the end the connection is keyed so that the optical cable will only go in one way it will snap in if it's inserted correctly any of these cables can be found at just about any electronics store so pick up the best one that suits you and that's it wide eye is now installed on your tv now it's time to get set up make sure the tv and the adapter turned on change your tv input so that you're pointing to the correct connected equipment and you'll see a splash screen awaiting connection now it's time to launch wide eye on your computer you might have an icon on your screen that you can double click and you might even have a button on your keyboard that starts it but if not you can click the windows start button on your taskbar enter intel wide eye in the search bar and click the program that pops up two quick things you might get a message about a firewall if you do just make sure to allow access to public and private access you will then see a licensing agreement read over it and then click i agree to the terms of this license if you do of course and then move on all right we're almost there your computer should start scanning for adapters now if it doesn't click the scan button at the bottom of the window your adapter should appear in a new window labeled detected adapters along with any other adapters in your immediate area if it doesn't try scanning again click once on the adapter then click connect at that point both your tv and your computer should say connecting if one doesn't cancel it and try again after a few seconds a code will appear on your tv and a window will appear on your computer asking for that code once you do that the connection is complete a message will appear that says connected to intel wide eye please wait and then you're done you may be asked to rename your adapter which you can do if you choose and then the image on your computer should now be mirrored on your tv next time you want to use your wi-connection make sure your adapter is on and the wide application on your computer is operating and there you have it once you follow these steps you'll be able to experience your pc in a whole new way right on the big screen tv good luck and have fun

Channel: Intel

Views: 609,354

Keywords: intel wireless display setup and first time use, intel wireless display, setup, first time use, intel, intel laptop, intel commercial, microprocessors, intel core, microchip

Id: oUN8rbhfShg

Length: 3min 53sec (233 seconds)

Published: Sat Feb 11 2012