Quick & Easy Vinyl Fence Setup On Steep Hills: Start To Finish DIY Tutorial!

thank you for watching another tutorial buy a wholesale vinyl fencing dotnet on this project you will notice that the ground is extremely steep and the customer they want to put a fence up so we had to dig the ground out to create a slope that the fence will be able to work with now that we have the ground dug out we are able to go through and put our post in and then we will begin the installation of the fencing we start off with a regular rail it's just a square real we put it up on the post this one got a square in on one end you see that's not going to work because it's at the wrong angle so what we have to do is cut this at the right angle only chance it allowed for the next rail it won't interfere with I got it one I'll show you what it looks like as we pet it see how that works it's cut with a poet exact angle of this teacher to the ground okay we'll go to test steep angle right here and what we're doing was putting a double rail in the reason we do this is because our pickets aren't going to be long enough so we use what we do we take this rider it's got a bird bit on it and we write all these holes out bigger all the way up and around we do it on both poles and then what we do is double stack our rail that makes our pickets long enough I'm up go ahead and put this in and show you but on top and what we also do is we put a screw in the tops of these don't move these rails won't slide down that screws your railing what we do is we put these through a rail to keep the rail in place so they will slide either way I'm going to show you how to and now I'm going to go ahead and put another stir in the cogs you can wanted the top from the bottom that way it can't go either way as you see we're back at this steep angle again what we got we got to make this picking match that ain't your simple put it in and won't work like that see the gap at the bottom so gotta cut the pickets tonight come on put it right down the side hold it right there Smith mark my pencil that gets my angle on the bottom it goes appealing they'll all be just like that I went ahead and cut my picket to the proper angle I'm supposed to be watching us it's gonna go in see that's a perfect angle on the bottom up there and you'll notice these are tongue and groove all these pickets are you got to start off with the groove again suppo and then work your way okay now after we did that this one pick it'll be the pattern for all the way to the secchi now as you go up the angle is going to change so you got to make a different pattern for the next section up okay now you seems we've got this one opening right here so full won't pick them up it there so we cut to fit whatever this measurement is so as you look you don't measure down like this the way the slope is you measure straight across now we go to the inside about the sin of this groove and you see that's five and a quarter so that'll be a cut here notice I'm straight across I'm not at an angle you see the angle we've got here we've got to make this angle fit this rail fit that angle so what we do inside a rail it's like inch and three quarters we allow yourself a quarter inch so what we do we measure up from the bottom of the hole one and three-eighths of an inch then we mark the line on each one then we pop a straight and it gets us a straight shot up to say okay we got the string up chalk line straight I put it on the one and three eighths on the chin all the pickets over pop it you see now that's perfect you're covered right here we're gonna have a problem we cut that off and it looks perfect and this is what we've come from top of a rail with it's just a cut off star what you do you take it cut it all the way down just right and it cuts Lenny Quinton smooth now we're going to put our top rail up so you push it out Capri alone you want to slide it in into the rail that's got more room we're going into an existing fence something there's a rail right there it's gonna hit so go in this is part okay guys this is the finished product that is how you make a vinyl fence work on a very steep hill as you can see vinyl fencing is very workable it can be used in many different applications if you are curious or you would like more information about vinyl fencing go to wholesale vinyl fencing dotnet thank you

Channel: Wholesale Vinyl Fencing

Views: 307,139

Keywords: Quick & Easy Vinyl Fence Setup On Steep Hills, Start To Finish DIY Tutorial, Quick, Easy, Vinyl, Fence, Setup, Steep, Hills, Start, Finish, DIY, Tutorial, Vinyl Fence Installation, Hillside Fence Tips, Steep Slope Fencing, DIY Hill Fence, Steep Hill Fencing Solutions, Sloped Yard Fencing, Easy Slope Fence Install, Fence Installation Techniques, Vinyl Fence DIY, Durable Fencing On Slopes, Residential Hillside Fences, Landscape Fencing Ideas, Slope Adaptable Fencing, Custom Slope, WVf&x%

Id: KHhUlc_BEsI

Length: 5min 34sec (334 seconds)

Published: Fri Aug 07 2015