I made a monster eel underneath the ice

The story begins in a remote mountain area, where people tell each other about a giant monster hidden under the ice. ...many people believe it to be true, but there are also many people who joke that it is just a rumor I also don't usually believe in folk tales, or word of mouth... But... Who knows ?... it's real... I wound 2 copper wires together to give the necessary rigidity for the skeleton Use aluminum foil to build up Wrap paper tape to fix I started adding clay, I rolled it very thin to make it easy to manipulate Please pay attention to the small details, shape before attaching, if necessary add copper wire cores to avoid them being broken I left the last teeth attached to sculpt the inside of the mouth I'll do the preheating of the fins, as they're quite thin and can break as soon as I attach them you can see their hardness and color after firing add a few beards for "beauty" >< I make the skin rough before adding clay to the scales The eel doesn't have scales =)) but it's a monster so it should be fine, lol Let's start painting the primer forgot, put teeth on oop! This part is a bit difficult because this baby's teeth are a bit tangled color for fins ...and teeth I use 5cm thick sheets of XPS foam for the base must first glue them together with white glue 4 sheets is enough Use a thermal foam cutter to preform the base You should turn off the air conditioner because of the toxic smoke mix water with gypsum powder The mixture should be thick to avoid melting I found some gravel and sand in my backyard gravel first, sand later, you need to do it quickly before the plaster hardens use airbrush to create a variety of colors on the base, this makes the rock look more realistic These are fake roots, you can easily buy them on e-commerce sites Paste more artificial aquatic plants looks good Use hot glue to glue the acrylic sheets to the base to make a resin mold Double check if you don't want to clean up the spilled resin I mixed a bit of blue resin because I wanted to make the monster stand out Ok, put it in and fix it I will untie the rope when the resin is almost flooded Nearly done Add some fish, otherwise what kind of fishing? =)) The last layer ! I use a heat gun to heat it up, this will make it easier to remove the mold I made the mold to pour the ice layer, don't need to be too strong because the silicone is thick When the silicone was almost dry, I used gypsum powder to spread the snow Create uneven terrain I use balsa wood for the wooden house model because it is soft and easy to shape I installed the lights to make it beautiful I installed a mini curtains Sharpen the ends of ice cream sticks to make pine trees Sculpting cold clothes for my minifigures I made 3 characters, 2 male, 1 female Cut a hole through the silicone, it's easy because it's soft Put the fishing guy here A dog is watching reality show A girl trying to tell a fisherman something Finally a guy is chopping firewood This car should have some snow on the top Let see

Channel: wAw Creator

Views: 298,754

Keywords: Gyarados pokemon, I made a monster eel underneath the ice, Pokemon, creator, diorama, eel, epoxy resin, gyarados, how to clay, how to sculpt, making monster, miniature painting, minibricks, monster diorama, monster eel, monster eel underneath ice, monster sculpture, polymer clay, polymer clay tutorial, realistic monsters, resin art, sculpting, sculpting tutorial, super sculpey, thalassophobia, waw, waw creator, ジオラマ, 잭잭

Id: r_YfJHdNma4

Length: 15min 20sec (920 seconds)

Published: Sat Jul 09 2022