how to use the signal fire fiber fusion splicer? the method in 2 ways will show you how convenient

hello everyone today i will introduce you about the signal fire ai-9 how to use it and in the normal days we see many people are used by these gardens but actually spartans will not use to woven and in the normal use of the fiber fusion process we just need one button is okay and now i will introduce your bot machine how to operate it so the first thing power on the machine then we'll show you a power on page and what we do is cleave the fibers this is alcohol pump then prepare two fibers this is our new product about the fiber striper one two three and four four in one is mod function and very useful now let's start to cleave the fiber the first testing is cleave the fiber open the cover lips and put it on the big grooves the second one fiber strap it deep with alcohol then cleave it again okay so when we put the fiber on the machine and then close the cover lips it's okay with the fiber to align okay so it's a line and when you turn on the splitting pulse and it will show you up icon and you press the start button then the fiberview fusion okay it shows you the fiber fusion is end so this is a full range and i will introduce you about this function how to turn it off and make it a fully automatic and what you do is just power on the machine and cleave the fiber then put the fiber on it with the fiber fusion over is okay so this is the situation about the fiber spacing pulse here and we take out the fiber to fiber here put here close it another thing is to connect connect the mobile app connect succeed and please make sure the machine number is connected to this machine make sure okay this one sure and then get into function configuration so you will see this icon it will interrupt in the fiber fusion and if you want to have a fully automatic fabric fusion you can turn also please process pause can you see that i will split process pause turn off it and save it now you can see the icon is it's gone and there's no icon so in this stage the machine will fully automatic let's try again clear fiber why use the following one fiber striper it's really really convenient because you can use it in one hand right okay now put the fiber on the machine the other one viper do the same job cleavage okay close the cover please note that the house icon is start off and we don't need bother it again okay so this is fully automatic what you have done is power on the machine and cleave the fiber put the fiber on the machine close the cover lips then it will all fully auto to help you to do the job above the fiber fusion so this is the method about fiber fusions these are using and if you have any questions please contact me in the youtube thanks

Channel: Signal Fire Fusion Splicer

Views: 25,822

Keywords:

Id: -bS4wrTyRwQ

Length: 7min 3sec (423 seconds)

Published: Fri Jul 08 2022