How to Setup Arduino IDE for ESP8266 with Arduino Port not Found Solution: A complete Guide

how to setup our esp8266 no DMC you with Rd new ID for that purpose I already have our Dino ID you installed in my Windows app store and I will explore all the options to connect the ID new ID with the esp8266 so for that first I will cook the two lofts and where I will have all the package associated with the espeak 2-6 6-4 that right now I you to the boot option because I have to find out the ESP two six six there to have all the functionalities those were available in each feed it to six six but right now there is no esp8266 our package is installing the food manager so without that without the esp8266 package it is not possible to set up for connect the esp8266 not MCU with the arduino ide so for that purpose I have to installed I have to install the SP two six six packets likely package from the wave resources to my already new IDE so for that purpose just go to the file options and then go to the preference here you have to just put the source URL that from where the artena I will download the is p8 two six six packages for that interface so right now I am pasting here the URL from where in the esp8266 our packages are available so this is the URL so right now just is yes done so right now what I have to do I have to go to the tool option and again go to the port option and go to the boot manager so right now you will have all the libraries are those are available for the arduino ide so from those packages you have to install the esp8266 package so for that purpose just use ESP okay right now the esp8266 libraries available there just what you have to do you have to install it so right now I already have one esp8266 packet install in my PC that's why it is saying I removed so let's have her from here you can choose the first person you want me spawn so right now just click on the install button so you will install all the esp8266 library modules and the cardio ide so for that right now you have to we have to wait our as the download is progressing so just wait for a few seconds then it will be ready okay so right now the ESP to 6 6 is a package library installed on my PC so later you can update it and you can also choose the desired person okay so let's go to the pool option again also find out if any update is there or not so ok again go to the boot option so right now ok if you go through the wood off sensor out here the generic e is paid to stick 6 modules are available so from these modules you can choose the appropriate one so for myself I am choosing the node in Co 1.0 e SP 12 emod evil that is a available in my kit so just select the proper no Dame's you module and you may choose any generic esp8266 module also depending on your requirement whatever kit you have so for my first one I am choosing this node NC 1.0 so right now it is available after installing the packages from the library it is available so just I am selecting that no dents you 1 4 & 0 again go to the two lofts and to find out if any applet is there or not so right now you can check that the node name suit pack is already there that is whatever often you choosing all the silica parameters are available right now so upload speed is also in even though it's done ok 1 1 5 2 0 0 few frequencies 80 magazines all the off since features when automatically selected from the node NC 1 for n 0 it that is available in the library function ok now again few things are there that we have to do so right now it is not possible the idea right oh it's okay the are due ID can and I didn't recognize the kid but ok let's have some cooter and just I want to fund those schools in my node else you get no ratio heat so that we can do some projects on that so the one vital thing is that the poor associated with the arduino ide and with the esp8266 right i'm just deserve it ok so just change it to serial port and again go there CDL is ok fine now the boot option is disabled here so all the things are fine and it will work but the port through which the no drains you esp8266 will communicate to the arduino ide through the USB cable it is a disabled that means no identification of course it's done till now that means we have to just another this port so for that purpose we have to download some drivers those are associated with the port that Minister using that driver we can enable the port and that is the immunity port of Bisson you have to install those drivers in the Windows system so that it can have food enable so right now I will find out the boot option from the properties and if I will go there and I will find the device manager my PC and get to the device manager if I will go through all the options then you will find that ok one of the you are UART peach controller don't have the proper driver that's why it is showing us some hidden message and for this reason the port of sin that is associated with the node n see you and that will connect the Arduino IDE is are not enabled there so for that purpose we have to just update the UART driver in the Windows PC so that it can recognize the port and through which the Commission will take place and I are the new ID you will enable the UART put ok so right now I can do one thing that is I can update the driver from here and okay the - is I'm leveling my PC so I will choose this one now it is available in my text off so I will go there ok this is available in this folder so I will choose the x64 ok so let's have a result yes again the Rev is I think not there in the fooled and so I will take really strong the driver for my desktop folder so wait for few second yes that is for package it will take some yes right now drivers updated I think now I will have the offered driver that is needed to communicate with the already know okay so right now you can see that the poot option is enabled so from here you have to choose the communication tree so after is turning or updating the driver the photo session is enameled and right now the arduino ide can communicate with our know the LCU Oh so that's all for these procedures you can set up your node and see you having esp8266 you can set up the esp8266 with the arduino ide

Channel: AKP's IoT Tech

Views: 109,841

Keywords: port not found arduino, port not found in device manager, esp8266 port not found, nodemcu how to enable port, arduino setup, arduino port not showing in device manager, how to add nodemcu board to arduino ide, USB COM port not working, How to enable Usb com port, Nodemcu COM port not working, Arduino port not working, Arduino port problem | COM port not found 2021 Update Complete Step by Step Guide, Arduino port greyed out, cannot select port in arduino

Id: kXtvpu2XM-I

Length: 10min 10sec (610 seconds)

Published: Sun Mar 03 2019