How to Set Up a Hornet and Footprint | NEMO

[Music] hi I'm Emily and I'm gonna walk you through setting up the hornet tent so we'll start out with the footprint laying that down on the surface that you're camping on and locating the head ends of the tent which are these straps with the c-clips making sure that the logo is also facing up that is the top of the footprint now I'll put my tent on the footprint and we'll get that all set up the head of the Hornet has to Jake's feet connections fees are going to be connecting to the footprint on the seat clips to connect to the Hornet footprint simply take the seed clips and guide them through the webbing loop behind the Jeep's foot attach the other head end of the footprint to the tent at the foot end of the time you'll take the volumizing strut and the footprint guy out point and you will seek those out like so taking our pole structure we will now take the head end of our tent which has the two v sectioned poles and we will attach the ball and joints into the Jake's foot do you simply snap right in to the small Jake's foot joint here at the foot under the tent locate the grommet on the tent body itself as well as the grommet on the footprint put the pole tip through both grommet points attach the tent body to the temples by simply snapping the Phi bar onto the temples and finish by setting up all of the pole clips on the temples attach the head end of the fly to the tent body using the clip to the Jeep's foot at the foot end of the fly there is an adjustable loop that attaches to the same stake point as the tent body and the footprint you can adjust these points by simply pulling on this adjustable cord lock finish staking out your tent by locating your vestibule and staking those out these also have an adjustable cord lock that you can use to adjust the tension of your festival the Hornet has a feature using a volumizing clip which helps pull the tent body away from itself creating more livable space to utilize this full feature simply use the clip and attach it to the small loop inside the rainfly this will pull the body of the tent away from itself creating more livable space finish by staking out your other vestibule and attaching your other volumizing clip all there's left to do is adjust the tension on your rain fly and use any guy out points if you think it's going to be windy and that's the Hornet you

Channel: NEMO Equipment

Views: 28,275

Keywords: Hornet Set up, Backpacking tent, tent set up, How-to, Backpacking, Ultralight tent setup, Design, Engineering

Id: LxfFRXCp5U4

Length: 3min 40sec (220 seconds)

Published: Mon Nov 18 2019