How to Remove a Commercial Lock - Replace a Security Lock - Schlage Lock

if you have a commercial lock I'll take you through the steps on how to remove it this is the lock on the outside and here we have the inside and you're going to need either a punch like I have here or an all and all you need to do is push it into this small hole on the side of the handle and that's going to release a little tab that will allow you to pull off the handle and now we're going to take a screwdriver and we're going to release this a scussion around the body of it and by gently catching Under The Edge we can pull the escuin off and sometimes they'll be screwed in place or they'll have a tab but the next step we're going to unscrew these two screws that are holding this outside ring onto the main part of the lock so I loosen the screw on top and on bottom and I'm pulling away this protective piece and now we're going to have two more screws to loosen to uh free up the lock once you have the two additional screws removed you can pull off this plate and then we can get to the main body of the lock now all you have to do is grab the other side of the lock and then just pull it away and it'll free it from the latch and that's the steps to remove a commercial lock from a metal door

Channel: FIX IT Home Improvement Channel

Views: 172,046

Keywords: home improvement, diy, diy projects, do it yourself, home improvement projects, schlage lock, security lock, commercial lock

Id: KZRiCD1KDr8

Length: 1min 23sec (83 seconds)

Published: Mon Mar 25 2013