How To Make Christmas Coaster using Cricut Infusible Ink | Cricut DIY | Christmas Gift Idea.

hey everyone welcome back to my channel thank you for stopping by again today um today's video if you can already tell by my shirt is going to be a christmas craft so i'm going to be making a coaster a christmas coaster with infusible ink and you can pretty much keep this out as gifts or even sell them if you would like to so if you haven't subscribed before we move forward please hit the subscribe button i'm waiting please hit that subscribe button it'll mean a lot to me um yeah let's get into today's video so for this project we'll need our infusion transfer sheet and i'm using this buffalo check one we also need our ceramic coasters right here this is a cricket blank we also are going to be using a heat press mat i have a white card stock right here i have my cricut maker and now we're going to design space to do our design so we're now in design space and like i've already created this i did i did play around to see what i wanted to use and as you can see we have the merry christmas and let it snow so um i'm just going to show you how i'll do that i'm going to use the fa-la-la-la-la with the tree and also merry christmas so i'm going to show you how i did that so i had this merry christmas svg which i got from last year and and what i'm going to do is for our coaster i make them generally 9.5 so i'm going to go to shapes click the circle [Music] and then change the size to 9.5 so just go up to wheat and type 9.5 as you can see it's 9.5 so i'm going to put this one i'm going to send it to the front and put it above the second which we just made and so it's easier to see i'll change the color to let's say red oh no yellow yeah that's easier to see and i'm just going to adjust it to make sure it fits within the circle or sit anywhere like i want it to be [Music] i think i'm okay with this so what i'll do is click both of them or highlight both of them rather click the align button and do center so that i centres it properly and i'm happy with the way it sits and since both of them are still highlighted i'll go down here and click slice [Music] so as you can see it's got a merry christmas out of the circle and that is fine so i'm going to delete this part because i don't need it i can change this color to red just so when i cut i know what i'm cutting so it's not red and i like the way it is and for fa-la-la-la-la i think i'm going to use the one with the tree so um down here i already have my trees which it was also from an svg pack and then i'm just going to type fa la la la so go to tex i'm going to be using the font welcome christmas so this font here welcome christmas i will type fala [Music] on one line then lala on the second line so i'll click text again space second line a lot on the third line so i'll click text again la and the headline and i'm just going to align them this way oh i'm going to do them by eye i like highlight them and then reduce the size [Music] so this is about six five point six there about and then i'm going to un-group both of these and then just put it by the side so you can see this one it's it's here so we're just going to put it right here let me highlight everything to see how wide and long it is so this is about 9.7 which is which is a bit um big since our circle is going to be 9.5 so i'm going to reduce it that's about it and i'll group everything now i'm going to go back to shape get a circle change it to 9.5 as i did with the other one so 9.5 and then i'm going to send it to the back i'm going to change everything to green or let's say yellow just um i see how it fits and see if i like it and i can use this one to compare so if i take this one up we'll see that in between the words there must there's a bit more space so what i'm going to do is ungroup it and just move this a bit so i get more space adjust this too for more space and this and for the trees i can increase the size a bit [Music] and now that i like the way everything is i'm just going to move away the circle highlight it again so [Music] and then group and then also i want everything to be cut out in order for me to slice it through the second it has to be welded so it has to just be one so i'm going to since i've grouped everything i'm just going to go down here and click weld so now that is welded i'm going to bring my circle back put it where i want it to be i can always use the um highlight both click align and center it looks good and so what i'll do since both of them are highlighted like i did with the previous one is i'm going to slice so it cuts through so now that i've sliced delete that one with this one and delete it so as you can see i'll change it again to red since we're going to be using the same pattern to cut it out so these are the two designs we're going to be cutting out today and now we're going to click make it or first off i'm going to hide these other ones so they don't show up group then press the i to hide it so every adapter is hidden and we just have these designs both of them and so now i'm going to click on make it [Music] now when you're cutting out um infusible in transfer sheet you have to mirror so if you know if you have seen any of my previous videos where i did um like the everyday iron on on my tooth pack and also i did everyday iron and write on the or even when i didn't feasible ink on the third bag you see that we mirrored it so we're going to click mirror so this design is mirrored and then now we're going to click continue so i'm going to go over to my machine and we'll do the cotton there so we're done with our design and i'm going to place the transfer sheet on the mat so i'm just going to put it down on the max even though i don't need everything i'm just i'm going to put everything and cut it out when when it's done cutting [Music] i'm going to send it to the machine on design space i've chosen my material which is transfer infusible in transfer sheets and now i'm just going to send it through so put it down here and loading it load it into the machine [Music] i'm going to go ahead and cut [Music] [Music] so i'll just take it off the masking think of the mask and i'll just cut out the part that we did not use so that i can keep it for something else so we have cut out the excess and we have this left and we're just going to weed it so take off the parts that are not needed but before i do that i'm going to turn on my heat press and i'm supposed to put it at 400 fahrenheit for 240 seconds so i'm going to turn it on so it can be heating up while we're waiting so it's ready when we're done reading oh i'm just going to go ahead and read this so to do that i'm going to take off the parts we don't need and you just bend it a bit and you once you start bending you see that the excess starts coming off so [Music] it's already coming up i'm going to take the spot off put it aside and then i'll just bend it as you bend you see it's coming off [Music] okay bend i'm gonna put it on you i'm sorry so i'm just going to fast forward through this side as you guys get the g stuff what i'm doing you just bend it bend it helps to remove all the tweed out the excess when you bend it so i'm going to fast forward to this side and i'll be back once it's done [Music] [Music] [Music] so we're done weeding and it's time to place it on the coaster so we have our coasters here our blind coasters and i'm going to just clean them down [Music] once again we'll place the design upside down on the coaster so if you remember we did mirror it and so when you look at it this way you can see that it doesn't look it doesn't make sense i mean you know what's the merry christmas but it doesn't make sense this way but when we place it upside down it's going to transfer onto the coaster and it's going to look this way so you're going to see everything clearly so now i'm just going to place it down all i'll do is put it this way make sure the design fits on the coaster and then i'll just press this down [Music] and just to ensure it stays down i'm going to turn it this way and use my heat resistant tape to tape it down so i have my tip right here i'm just going to use it and tape it down [Music] step down and i'm going to repeat the process for this other coaster so turn it down and tape it [Music] [Music] this is done and our heat press is ready i'll get my mat so i'm just going to say the order in which you put this down [Music] [Music] so my mouth goes down first i'll move the custard aside then next would be my white caster and now you can see i've used this cutter previously but it's too fine i'm going to use it so i have my white cast up next and then my coasters will go on next so i'm going to put them this way so that it's not going to be this way but i'm going to turn it down put this down and then put this down just like that [Music] next would be my butcher paper i'm going to place it [Music] on top of that and last will be the easy press so i'm just going to take the easy press and i'm going to put this put it this way just to ensure sorry i was speeding that's about cool i'm going to put it this way to ensure it covers good stuff so i'll put it down [Music] i just want to make sure it follows up [Music] which it does and then i'm going to start it so it goes for 240 seconds which is four minutes and then once that's done we'll come back [Music] so it's done and i'm just going to lift this up and put it back on i'm going to take off the picture paper but for this i'm going to let it cool um it's very hot if you touch it it's very hot so i'm going to let it cool and when it's cool we'll come back on show you guys the coaster so now that this is completely cooled oh it feels completely good we're going to take off the tape and take off the sheet from it so i'm just going to [Music] i'm just going to look at the side to see how it's looking okay wait for it [Music] just look at this look at this i can't wait to do second one i'm excited [Music] [Music] oh this one definitely transferred fully this one you can see the sides there's a bit of a smudge apart from that it looks good i hope you guys like it too [Music] so there you have it guys i hope you enjoyed watching me make this coasters i'm definitely going to be making some more maybe use them as christmas gifts for people um yeah i hope you liked this video and if you did please hit the like button and if you haven't subscribed please hit the subscribe button it's somewhere down there i know you can see it please hit that subscribe button you mean a lot to me until next time stay blessed bye

Channel: Loved By J Creations

Views: 366

Keywords: christmas crafts, how to make, diy coasters, infusible ink coasters, infusible ink, cricut infusible ink, christmas project, christmas diy 2021, christmas diy

Id: Gu_X7BzeXeo

Length: 20min 8sec (1208 seconds)

Published: Mon Oct 04 2021