Come fare un tavolo infinito in 3d /Infinity 3d table

Hello all friends and welcome back to the channel in this video we are going to create a 3D infinite table it will be a very beautiful and interesting video so I took a 200 liter metal drum and cleaned it very well which was dirty with paint and therefore the 'I cleaned it well. Then I gave it a good sanding with P220 a little everywhere so that the paint gripped the barrel. Then with an airbrush I gave it a coat of cream-coloured paint, sweeping away that blue from before. What do you see? Does it seem like this color? Write to me in the comments. I started cutting some wooden boards to create the internal ladder. The height measurements were equal to the height of the trunk, therefore 85 cm. Then I made the steps with bamboo and their width was I made it 26 cm Then I gave it a coat of black paint to embellish it a little now with a self-adhesive stone effect wallpaper or I took the length of the trunk cutting everything to size and then trying to glue them to the internal walls of the trunk I tell you that I struggled a bit because I wanted to put the drawing horizontally, all this creating some not very nice folds but then the result paid off. All the effort after measuring half the stem I made a hole with the drill the size of a cable electric this way I brought the light inside guys I wanted to ask you for a simple like if you like what you are seeing, this way I can make YouTube understand that my videos are worth watching using a suction cup and a marker or drawn a circle to be able to cut everything by searching around and also on Amazon. Round mirrors with a width of 60 cm the price exceeded €130 luckily I had an old mirror in the cellar that I no longer used and I covered the Trace that I made with some paper adhesive tape and with the hose and the diamond blade I'm going to cut it I see it's going very well I didn't trust myself to do it with just the diamond because I was afraid it would split and in this way I'm going slowly I put on my glasses and the gloves and they are safe and we will cut in this way I did the same job cutting a plywood panel I needed it as a cushion to place the mirror in this way it could resist impacts and bounces I inserted the ladder attaching it with glue hot for the entire diameter of the edge I put a jute rope measuring 15 mm in diameter this would be the top also in 8 mm thick glass this time I had it made by the glassmaker it had to be perfect So I didn't want to risk it I glued it here too I glued an adhesive mirror film by spraying water and pushing out all the bubbles with a rubber spatula. Don't use plastic as it can scratch it. I cut the leftovers with a new blade of a cutter, leaning against the edge of the glass that's all guys it was a very simple video Tell me in the comments if you liked it or not If you liked it I just remind you to leave a like and subscribe to the channel and we'll see you with another video tutorial Bye

Channel: EpoxyGio

Views: 45,426

Keywords: come fare un tavolino, tavolino caffe, legno, come si prepara la resina, epoxy resin diy ideas, tavolo in resina nera, infinity, coffee table, minecraft, mineshaft, lights, woodworking, woodwork, wood, table, build, one day build, light up table, ladder table, tavolo infinito, tavolo 3d, fai da gio, mirror, tavolo specchio, giochi di specchio, infinity effect, 3d effect table, 3d mirror effect

Id: fhq2xzGPtcc

Length: 8min 21sec (501 seconds)

Published: Mon Sep 25 2023