How To Load Net Wrap Into Your Kubota Round Baler

hold on I have a Matt Johnson tractor doing the woz wisdom take over today we're going to demonstrate how to install net wrap in a Kubota round baler our first step once you're out in that wrap raise your front cover raise your side where we have our convenient net wrap storage will hold two rolls here so we will have to come to our monitor neck wrap break needs to be raised [Music] [Applause] [Music] well our borrower neck wrap will be installed when you install the neck wrap make sure that it is coming over the top of the roll slide that on the vocal mix is very nice even height going to reach up and he didn't matter grab your gun wrap pull out of the tail we've done it tie a knot keep it all together on the front end we have two rolls we have a bottom roll which is our spreader roll we come underneath the spreader roll and we have a smooth roll on top it comes over top of that and then straight back into our baleia where our gut feel is Italian you want about 12 inches of tail hanging into your Baylor's pull our lever on the side to raise our brake flap underneath take some slack off of our roll we install our locking pin just come back to our displayed lower our nut wrap break and we are ready to go Bailey

Channel: Johnson Tractor

Views: 3,340

Rating: 3.4000001 out of 5

Keywords:

Id: C4oMvUcjuEE

Length: 2min 50sec (170 seconds)

Published: Wed Jan 22 2020