How to Install Flooring T-molding | Vinyl Plank | Laminate | DIY | 101 with GoPro

this is the official molding that's gonna sit right here and the channel that so we should stop our flooring quarter inch away from the channel now all the floating floors actually come with transitions this is the tea molding channel goes here the molding whips into so what I do when I'm on slab wood glue this channel here and then the next day which is tomorrow to come with this things in and so we use this Roberts 70-200 which is very cold cold war based deceive but it's the best glue to use on you learn this plastic channels to the well now important thing to know you actually wanna glue it down and over to the time right there down to the floor and so that so that vertical surface will grab also I do wanna put some get down into the tile for the tango and that's how it's gonna hold the best we will make sure there is nothing we shall you so we're now to the tea molding pours the basis should be installed first but that's ideally right so that you install the molding frozen have to undercut your base some people do that but I'll just use this right now and make this I actually use two short pieces like a diamond saw and I play with them and I'll show you how this is the only way to do it right the first time so pay attention here okay angle is 45 this I have to cut it 22 and a half on the miter saw chops on 22 and a half I'm gonna make one this angle now I'm gonna do the other way [Music] these you don't want to you don't want to chopping fast I'm gonna cut them slowly [Music] with these pieces here first I'm gonna make sure that 22 and a half works and if not you can adjust it this seems to be mixed to perfect this is next perfect so I'm gonna put on where I want to be which is right here so now I can measure these from that base to the longest point here see or you can go to the shortest the longest is easier so 69 and [Music] 1313 I'm gonna trace this end or just so I know it's going that way and I don't make mistake heard of measure twice cut once 69 1369 13 now this guy I actually want to run all the way to this tile here so I'm gonna measure it from the tile to the longest point again because if you'll be looking at that longest point when you're cutting it so eight and a half I'm gonna make sure this one is the good edge and we're gonna do eight and a half here again on the very edge mark which way it's going and so here on this piece I'm gonna remove the just a bit take the SAP so it actually rests a little bit on the tile itself okay ready let's go do it say you do it later without any mistakes and of course you want to make sure it's laying flat not any gold right so push it down real hard [Music] [Music] [Music] this be careful slowly [Music] I'm gonna go buy this connection here my channel make sure there and there she is literally like a glove you doing yes here's a mod you have to all right ended pretty this you can actually go together 200 which is a vinyl codebase adhesive which is what I used to glue the channel [Music] [Music] [Music] and rice that line will disappear or it's not you can use you can use some wood putty or pillar there it is you [Music]

Channel: Youdoit!

Views: 86,559

Keywords: Flooring Transitions Professional Installation, T molding, T-molding Installation, Flooring Transitions Installed on Concrete Slab

Id: LmzNRVhyPMA

Length: 15min 22sec (922 seconds)

Published: Mon Sep 30 2019