hello
hello assalamualaikum warahmatullahi wabarokatuh meet again and the creation channels for the
installation and service of electronic goods in this video I will discuss about the clarification
of comments that came from Mr. Indeed Rosadi eh Semangkung. The question is which stun, which is Neutral,
he said, in this video I will make a tutorial in as much detail as possible on how to install
the correct electrical installation, let's just practice Go lessons here, first install
the MCB, the bendsneyder MCB, don't install it here, we home to make one socket switch
with one light here the cable from the cable from PLN from KM directly what is the name
of the phases or stun this is the stun section from our KM directly Hi, plug it into the
MCB, this password cable will also be like KM we cut off the phase, the stun section
[Music], hey, OK, finished the stun section, the stun section, the plus section,
this phase now the Neutral part is a neutral cable [Music] Hey, the neutral cable, we directly
feed the box into the teebox or t.dus. Nisa just gives mulatsih maybe later it will
make it neater if we put it into practice directly in the electrical installation Okay,
let's close it for safety Bro Hi Ho Hey, here the blue is a neutral cable and the brown
one is a Pasa cable or the fiber stun cable is a zero cable, right? [Music] hey hey hey hey this brown wire goes
into the switch the brown wire goes into the switch [Music] reset switch [Music] Hi, yes,
this is the bottom of the red bottom OK, let's direct the switch Connect to [Music] in the
stroom section of stroom plus or it's like hi hi hi hi hi hi hi mas oil and this cable the article is also we connect
it to the switch too [music] [Music] hi hi hi hi hi, here is the lower part that stuns [Music] while this one
also stuns the top to the top then the lower part that stuns brown-chocolate, we jumper
our Jember to stun plus the socket Hi, this is for the bottom put on here become one Land
with the stun part here hi ok yes in this part Hi Okay we're fasten hi hi he smells
here the stun part [Music] hi hi on the table Hi this cable is for Hi Pasa for the neutral
for the neutral [Music] Hi, we put the jumper and strum cables from this switch into the
pins, now the sockets and this is for the Neutral [Music] [Music] Hi Ok let's tighten
up [Music] Hi, this one was wired from neutral Neutral, we directly connect to Neutral e-toll
from McD from McD telnet Roll music Sorry Neutral from KM Okay, this is neutral, this one is going
to Hi lights, now this is for the lights from the [Music] switch hi hi hi the lamp the lamp
cable is directly installed hey hey hey hey don't forget to be on basil for September
[Music] Trans directly Connect to the fitting to the light fitting now [Music] hi hi hi
hi hi hi hi hi hi in Indonesia at a&k can one more Hey those who go to the lights, we
connect to Neutral hey hey hey hi, this cellphone, let's connect this cable to the other light
fitting [Music] Don't forget to isolate if we can slow it down to a minimum of 4 loops
so that it can be Septi too hi hi [Music] [Music] reviewing okay then we will close
normally, we will close it for safety hi hi hi, let's try [music] right away, hi hi, let's
go to the nth plug OK, we've plugged it in. Turn on the MCB, we try the lights. does not turn on ok [Music] Hi try it onceagain,
let's turn off the MCB first, we turn it on hi, okay, it's okay, that's all for my tutorial
on how to install electrical installations, thank you, indeed, Rossa ID, who has commented,
I've made the video. make a more detailed video Hi if this video
is useful please like Comment and share subscribe also don't forget thank you hopefully it's
useful wassalamualaikum warahmatullahi wabarakat
