How To Fix Packet Burst on MW3 Steam & Battle.net

hey guys in this video I will show you how you can fix a Modern Warfare 3 packet burst on PC and really doesn't matter using steam or Battlenet so without further Ado let's get started first of all you need to go to device manager then on Device Manager you need to uh expand this option here network adapters and depending on your uh computer it should be real Tech or Intel uh in Tech uh gaming uh here so you need to right click on it go to properties uh then you need to go to Advanced then you need to scroll down until you see uh priority uh and ban here and what you need to do here is to Simply uh select make sure uh this option is selected priority uh and VLAN is uh enabled right and uh after that you just need to apply the changes and then you need to look if the problem persists or not and still if the problem persists then another thing that you need to do here is to reset your internet and to do so you need to just open up CMD or command prompt uh run as administrator and then you need to add following commands so the first one is uh this one you need to put the command here no why it's not copied then uh another one is Nash when so reset and then you need to put ip config slash uh flash DNS right H and after that you need to do another step here you need to open up uh settings then you need to go to network and internet advanced netk network settings and then network reset and reset network I'm not going to do that but you just need to reset now press reset now and restart your computer and after that the first solution will end and you need to look if the problem persists or not and if the problem persists uh you need to uh with the second solution you need to add H ports to Modern Warfare three and to do so you just need to open up uh Windows Defender Firewall this one uh or not this one Windows Defender Firewall and advanced security then select inbound rules H add new rule and then select Port press next uh select TCP and then you need to put this code here for TCP and then press next allow connection and then here you need to just write TCP pod right finish and then again you need to add new rule uh Port next UDP uh copy UDP code I will leave uh these codes in the description of this video below so you can easily copy and paste it and then allow connection and then UDP pod right press finish and after that you just need to after to add your your ports you just need to restart your computer and then you need to look if the problem persists or not and if the problem still still persist then I highly suggest it to reset your modem uh on your modem there is little button that you need to press hold it for a few seconds here or just Google it out how to reset your particular modem and then after restart your computer and reset your modem if these uh Solutions do not work for you then you need to look if the problem persists or not but if you apply the first solution and the second solution the problem should be fixed so yeah that's pretty much it and if I help you out please press like button and subscribe for more take care bye

Channel: Gaming Problems Solved!

Views: 2,486

Keywords:

Id: H5gMmcrKfDg

Length: 4min 17sec (257 seconds)

Published: Mon Feb 05 2024