How to configure GRE Tunnel over IP-sec VPN | IP-sec VPN Over GRE Tunnel - FortiGate Firewall

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
welcome to it and network Kings official Channel how to configure gr tunnel over IP SE between fortigate firewall quick lab guide we are performing this configuration on E emulator fortigate firewall site minus one public and private IP details of office number one public network IP 4.4.4 do2 private Network IP pool 192.168.1.2 sl30 485 all sit2 public and private IP details of office number two public network IP 3.3.3 do2 private Network IP pool1 192.168.1.1 sl30 go to lab office number one configuration Open phate click VPN click IP SE tunnels click create new type name in name tab click custom then click next type remote site when IP in IP address tab select when interface enable mode config type pre-shared key select ik version 2 click add Phase 1 proposal select encryption and Authentication select Dy Helman groups 14 click okay to save open Terminal go to config system interface edit IP set gray set Source private IP 192.168.1 22552581 192.168.1.1 next end go to config system gr tunnel edit IP SE tunnel one choose any name new entry added set remote gateway 1 1921 16811 set local Gateway 192.168.1.2 set when interface IP seg gr next end click policy and objects click ipv4 policy click create new type policy name select IP SEC GR in incoming interface select IP SEC GR in outgoing interface select all in Source tab select all in destination address tab select all in service tab click okay to save office number two configuration Open phate click VPN click IP SE tunnels click create new type name in name tab click custom then click next type remote site when IP in IP address tab select when interface enable mode config type free shared key select ik version 2 click add Phase 1 proposal select encryption and authentication select Diffy Helman groups 14 click okay to save open Terminal go to config system interface edit IP set gray set Source private IP 192.168.1 1,255 255.255.255.192 next end go to config system gr tunnel edit IP SE tunnel choose any name new entry added set remote Gateway 192.168.1.2 set local gateway 1 192.168.1.1 set when interface IP seg gr next end click policy and objects click ipv4 policy click create new type policy name select IP SE GR in incoming interface select IP SEC GR in outgoing interface select all in Source tab select all in destination address tab select all in service tab click okay to save let's verify e gr tunnel over IP SEC encryption configured please like And subscribe it and network Kings official Channel
Info
Channel: IT & Network Kings
Views: 298
Rating: undefined out of 5
Keywords: Networking, Cybersecurity, Cloud computing, Network security, Data center management, Wireless networking, Network troubleshooting, IT solutions, Network architecture, Network protocols, Network virtualization, IT governance, Network performance optimization, How to configure GRE Tunnel, How to configure Fortigate Firewall, How to configure Mikrotik RouterBoard, Quick Lab Guide, Live Envoirement, GRE Tunnel configure, IP-sec VPN Over GRE Tunnel, GRE Tunnel over IP-sec
Id: MinD1qyGuHA
Channel Id: undefined
Length: 7min 51sec (471 seconds)
Published: Thu Mar 21 2024
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.