This is the Stickney Water Reclamation Plant in
Chicago, the largest wastewater treatment plant in the world. It serves more than two million people
in the heart of the Windy City, converting all their showers, flushes, and dirty dishwater,
plus the waste from countless commercial and industrial processes into water safe enough to
discharge into the adjacent canal which flows eventually into the Mississippi River. It all adds
up to around 700 million gallons or two-and-a-half billion liters of sewage each day, and the plant
can handle nearly double that volume on peak days. That’s a lot of olympic sized swimming pools, and
in fact, the aeration tanks used to biologically treat all that sewage almost look like something
you might do a lap or two in (even though there are quite a few reasons you shouldn’t). However,
flanking those big rectangular basins are rows of circular ponds and smaller rectangular basins
that have a simple but crucial responsibility in the process of treating wastewater. We often use
chemicals, filters, and even gigantic colonies of bacteria to clean sewage on such a massive
scale, but the first line of defense in the fight against dirty water is usually just gravity.
I’m Grady, and this is Practical Engineering. In today’s episode, we’re talking about
settlement for water and wastewater treatment. This video is sponsored by
Wealthfront. More on them later. This video is part of a series on municipal
wastewater handling and treatment. Rather than put out a single video
overview of treatment plants (which many other channels have already
masterfully done), we’re taking a deep dive into a few of the most interesting
parts of converting sewage into clean water. Check out the wastewater playlist linked in
the card above if you want to learn more. The job of cleaning water contaminated
by grit, grime, and other pollutants is really a job of separation. Water gets along
with nearly every substance on earth. That’s why it’s so useful for cleaning and a major part of
why it does such a good job carrying our wastes away from homes and businesses in sewers. But
once it reaches a wastewater treatment plant, we need to find a way to separate the water from
its inhabitant wastes so it can be reused or discharged back into the environment. Some
contaminants chemically dissolve into the water and are difficult to remove at municipal
scales. Others are merely suspended in the swift and turbulent flow and will readily settle
out if given a moment of tranquility. That’s the trick that wastewater treatment engineers
use as the first step in cleaning wastewater. Once it passes through a screen
to filter out sticks and rags, sewage entering a wastewater treatment
plant’s first step, or primary treatment, is the simple process of slowing the wastewater
down to allow time for suspended solids to settle out. How do you create such placid conditions
from a constant stream of wastewater? You can’t tell people to stop flushing or showering to slow
down the flow. Velocity and volumetric flow are related by a single parameter: the cross-sectional
area. If you increase this area without changing the flow, the velocity goes down as a result.
Basins used for sedimentation are essentially just enormous expansion fittings on the end of
the pipe, dramatically increasing the area of flow so the velocity falls to nearly zero. But just
because the sewage stream is now still and serene doesn’t mean impurities and contaminants instantly
fall to the bottom. You’ve got to give them time. How much time is a pretty important question if
you’re an engineer because it affects the overall size of the basin, and thus it affects the
cost. Particles falling out of suspension quickly reach a terminal velocity, just like a
skydiver falling from a plane. That maximum speed is largely a function of each particle’s size, and
I have a demonstration here in my garage to show you how that works. I think it’s intuitive that
larger particles fall through a liquid faster than smaller ones. Compare me dropping a pebble to a
handful of sand. The pebble reaches the bottom in an instant, while the smaller particles of sand
settle out more slowly. Wastewater contains a distribution of particles from very small to quite
large, and ideally we want to get rid of them all. As an example, I have two colors of sand here.
I sifted the white sand through a fine mesh, discarding the smaller particles and keeping the
large ones. I sifted the black sand through the same mesh, this time keeping the fine particles
and discarding the ones retained by the sieve. After that, I combined both sands to create a gray
mixture, and we’ll see what happens when we put it into a column of water. This length of pipe is
full of clean water, and I’m turning it over so the mixture is at the top. Watch what happens
as the sand settles to the bottom of the pipe. You can see that, on the whole, the white
sand reaches the bottom faster, while the black sand takes longer to settle. The two
fractions that were previously blended together separate themselves again just from
falling through a column of water. Of course, physicists have used sophisticated
fluid dynamics with partial differential equations to work out the ideal settling
velocity of any size of spherical particle in a perfectly still column of water based on
streamlines, viscosity, gravity, and drag forces. But, we civil engineers usually just drop them
in the water and time how quickly they fall. After all, there’s hardly anything ideal about a
wastewater treatment plant. As water moves through a sedimentation basin and individual particles
fall downward out of suspension, they take paths like the ones shown here. Based on this diagram,
you would assume that depth of the basin would be a key factor in whether or not a particle reaches
the bottom or passes through to the other side. Let me show you why settling basins defy your
intuitions with just a tiny bit of algebra. You’ve got a particle coming in on the left side
of the basin. It has a vertical velocity - that’s how fast it settles - and a horizontal velocity
- that’s how fast the water’s moving through the basin. If the time it takes to fall the distance
D to the bottom is shorter than the time it takes to travel the length L of the basin, the particle
will be removed from the flow. Otherwise it will stay in suspension past the settling basin.
That’s what we don’t want. As I mentioned, the speed of the water is the flow rate divided
by the cross sectional flow area - that’s the basin’s width times its depth. Since both the
time it takes for a particle to travel the length of the basin and the time it takes to settle to
its bottom are a function of the basin’s depth, that term cancels out, and you’re left with only
the basin's length times width (in other words, its surface area). That’s how we measure
the efficiency of a sedimentation basin. Divide the flow rate coming in by the
surface area, and you get a speed that we call the overflow or surface loading
rate. All the particles that settle faster than the overflow rate will be retained by the
sedimentation basin, regardless of its depth. Settlement is a cheap and efficient
way to remove a large percentage of contaminants from wastewater,
but it can’t remove them all. There are a lot more steps that follow
in a typical wastewater treatment plant, but in addition to being the first step of the
process, settlement is also usually the last one as well. Those circular ponds at the Stickney
plant in Chicago are clarifiers used to settle and collect the colonies of bacteria used in
the secondary treatment process. Clarifiers are just settlement basins with mechanisms to
automatically collect the solids as they fall to the bottom. The water from the secondary
treatment process, called mixed liquor, flows up through the center of the clarifier
and slowly makes its way to the outer perimeter, dropping particles that form a layer of sludge at
the bottom. The clarified water passes over a weir so that only a thin layer farthest from the sludge
can exit the basin. A scraper pushes the sludge down the sloped bottom of the clarifier into a
hopper where it can be collected for disposal. Settlement isn’t only used for wastewater
treatment. Many cities use rivers and lakes as sources of fresh drinking water, and these surface
sources are more vulnerable to contamination than groundwater. So, they go through a water
purification plant before being distributed to customers. Raw surface water contains suspended
particles of various materials that give water a murky appearance (called turbidity) and can
harbor dangerous microorganisms. The first step in most drinking water treatment plants is to
remove these suspended particles from the water. But unlike the larger solids in wastewater,
suspended particles creating turbidity in surface water don’t readily settle out.
Because of this, most treatment plants use chemistry to speed up the process, and I have a
little demo of that set up here in the studio. I have two bottles full of water that I’ve
vigorously mixed with dirt from my backyard. One will serve as the control, and the other
as a demonstration. The reason these tiny soil particles remain suspended without settling is
that they carry an electrical charge. Therefore, each particle repels its neighbors, fighting
the force of gravity, and preventing them from getting too close to one another. Chemical
coagulants neutralize the electric charges so fine particles no longer repel one another.
Additional chemicals called flocculants bond the particles together into clumps called
flocs. As the flocs of suspended particles grow, they eventually become heavy enough to settle out,
leaving clarified water at the top of the bottle. Treatment plants usually do this in two steps, but
the pool cleaner I’m using in the demo does both at once. It’s a pretty dramatic difference if you
ask me. In a clarifier, this sludge at the bottom would be pumped to a digester or some other solids
handling process, and the clear water would move on to filtration and disinfection before being
pumped into the distribution system of the city. Our ability to clean both drinking water
and wastewater at the scale of an entire city is one of the most important developments
in public health. Sedimentation is used not only in water treatment plants but also ahead of
pumping stations to protect the pumps and pipes against damage, with canals to keep them from
silting, in fish hatcheries, mining, farming, and a whole host of other processes that create or
rely on dirty water. The science of sedimentation and settlement is something that impacts
our lives in a significant way and hopefully learning a little bit about it helps you recognize
the brilliant engineering keeping our water safe. Just like we keep the environment clean
by investing in treatment infrastructure, you can start investing for your financial goals
with today’s sponsor, Wealthfront. Wealthfront is an automated investment platform that uses
software to help you build a portfolio and grow your money over the long term. Many
people, myself included, are intimidated by the world of investing. It seems complicated,
like there’s so much to learn and keep track of, especially when the stakes are your own savings.
But, time is your biggest asset when investing. As Albert Einstein said, “compound interest
is the eighth wonder of the world.” So, if you have financial goals for the future like
buying a house or retirement, it makes sense to start now. Wealthfront simplifies investing and
walks you through the process of building and managing a portfolio based on your risk tolerance.
All you need is a few minutes and $500 to open an account, and they care of the rest. It’s
like hiring a financial manager except with a beautiful interface, no phone calls, and an
affordable quarter-percent annual advisory fee. And Wealthfront is offering to waive that
fee for fans of Practical Engineering, meaning they’ll provide their services entirely
free up to $5,000 in assets for life. Give it a try today at the link in the description. Support
our sponsors helps support the channel. Again, that link is in the description. Thank you
for watching, and let me know what you think!
