How to Calibrate DC Voltage on the Fluke 55X0A Multi-Product Calibrator (using DMM AUTOCAL)

hi I'm bill with blue calibration I'm going to show you how to calibrate DC voltage on a digital voltmeter we will be demonstrating how to calibrate DC voltage as you can see the visual Management on front and utilizing our DMM Cal kit you're still able to see the features on it you simultaneously can plug in the sense and the voltage into the input of the DMM plug the high current into your DMM you plug in your low current into the DMM this will prevent you from utilizing any cable changes you just go directly all connections are made now it's just a matter of using the function we will enter the first value one volt all right we'll press operate you can see that the DMM reads slightly lower we can adjust that to make the auto corrections to the voltage as soon as you make those Autos you'll see the difference onto the error mode right if you want to see the current uh specification you have the current specification you can also use your multipliers on the instrument so you never have to change ranges you just times 10 right now it would go into safe because it's above the 30 volts so yeah you go back to operate and now your meter will show the correct voltage foreign

Channel: Fluke Calibration

Views: 2,774

Keywords:

Id: QwhFJ07YmTs

Length: 1min 45sec (105 seconds)

Published: Wed Jan 11 2023