El Yapımı Mengene / DIY fikir !

Hello, welcome to my video 🖐. In this video, I will make a large Vise with a wide mouth that I need. I want to evaluate the materials I have, without allocating a large budget. That's why I put the materials on the table as you can see. I think I will make a nice vise out of these. First, I'm going to adjust the sled part of the vise. Since the U irons in my hand do not fit, I will fill the gaps next to them with L irons. It's a wonderful weather outside. I wanted to show you the snowfall. Time passed so fast. It's evening, it's gorgeous outside again. Again I wanted to show you how much it rained. Should I quit work and build a snowman :)) Let's do some welding and warm up :) I can always find something useful in this box :) The threading guide I use is the M8 3-stage guide. I am gradually threading as I have shown on it respectively. The first thing we need to pay attention to in threading is to keep the guide at a right angle and turn it 1 turn to the right and half a turn to the left. Depending on the hardness of the metal, we can keep the laps short. Even though I drilled with the thickest drill bit I had, the bolts in my hand were not enough to bury the heads. Of course, I don't want to buy a new bolt :) That's how I did it :))) If you like my video, don't forget to subscribe to my channel and turn on the notification bell. I need your support to continue this type of content. Again, I am next to my box where I can find everything :)) This piece will protect the bearing from external dust and prevent the oil that I will fill inside from leaking out. I'm at my box again :)) I owe this box. :))) I don't want the source traces. I cleaned it as best I could. I cut the legs of the vise in this way to create a play. If your workplace is narrow, I recommend doing it this way. I think I draw well. I think it adds a nice visuality, even if it's not like a real Thor's hammer. Now I've moved on to my last transaction. I want to show you a different paint technique. I hope you like it :)) Thank you for your time for my video. I hope you like my video. If you've watched this far, you've already given a like. Please subscribe and comment, I would be very happy. See you in the next video. take care 🖐

Channel: M.R. AKPINARLI

Views: 1,750,435

Keywords: Diy, Mengene yapımı, Thor çekiç yapımı, Vise making, ahşap mengene yapımı, basit mengene yapımı, bench vise, diy activities, diy metal bench vise, diy metal vise, diy projects, diy vise, drill vise, homemade metal vise, homemade vise, how to make metal vise, how to make vise, making a metal vise, mengene nasıl yapılır, mengene yapımı el yapımı, metal bench vise, metal vise, steel vise, thor, vise, Изготовление тисков, своими руками, тиски, тиски своими руками

Id: 4vizEITdpvA

Length: 24min 33sec (1473 seconds)

Published: Mon Apr 25 2022