Gunsmith Part 14 - Patch 0.14 Guide | Escape From Tarkov

hello and welcome back to gunsmith part 14 today we're going to be handing in this HK416 here is the finished build if you just want that screen but we're going to skip over to the characters tab so that we can get started so here's the built one that I've done we're going to start by looking on the flea market and grab one these are pretty much in default configuration just make sure that someone's not pulling something stupid on here but usually you can get this cheaper than you get from the trader I can't even buy them from the trader myself at the moment because they're mechanic for but you can just get one from the flea market pretty easily once you're here at this point we need to do two things that the quest doesn't ask for the first one is to move the barrel over to the 11in barrel so we'll do that and the second is to change the handguard over to the Midwest 9 in this build doesn't work without it so now that we're here we're going to start adding various things that are pretty easy to do we're going to start with the rc2 suppressor this needs to go onto an sf3p compensator like so and then we'll get this rc2 on top of that clearly I need to add the gas block in again because I changed the barrel over so let's just make sure that we do do that and then we're going to add an rvg tan forgrip we need to add the mlock 4.1 in rail first and then the rvg on top on the top of the gun we're going to put the holographic that's required which is the tan XPS 32 this one here and then we're going to add theoe pistol grip this one is this one heree AR-15 pistol grip magpull make sure it is this specific one I actually got this wrong and I put on the mad when I was looking at this build to begin with on the back of the gun we're going to put the ubr Gen 2 which just goes on straight like that no problem at all and then we're going to add a caner lever Mount here this is one of the ones that gives you plus one Ergo this is important because the build won't complete without it on top of this we're going to put the la5 be peq tactical device this one is a pain because there's really no way to get it other than from high level Traders and unless you're mechanic for you can't get it and it tends to be pretty expensive so you're just going to have to buy it from the flea after this you can usually use whichever mag it needs to make sure that it goes underneath 4 kilos though so the regular stanag one should work and then all we need to do is add some sights to get ourselves up to 60 so we're going to do the Chris Defiance rear and the Chris Defiance front like so this sticks us just under 4 kilos so make sure that your magazine is something sensible you can't use 20s or t you can't cheese the quest like that it has to be 30 and if you try to use the HK steel it will not work so Swap this over to the stanag and the build should complete I'm going to select my weapon just to show you that I can't actually build it because it's exactly the same as the gun that I've got and then we're going to go over to mechanic and as usual we'll hand it in and we will be on to gunsmith part 15 instead

Channel: Gigabeef

Views: 39,320

Keywords:

Id: HVhKT4yq3Ys

Length: 2min 20sec (140 seconds)

Published: Tue Jan 30 2024