Exporting UgCS route to DJI Pilot 2 (M3E / M30 / M300)

[Music] hi guys I'm kristaps from GCS and in this video I'll just be showing you how you can use the new export feature to export the routes made in GCS to DJI pilot 2 and fly them with your mavic 3 Enterprise m30 or m300 drones as you can see behind me here I already have the mavic 3 Enterprise drone and in front of me I have the egcs screen here also I have the DJI smart controller for the mavic 3 Enterprise so what we'll need to do first you can see here where I have the root in ugcs for mavic 3. First Once you have created your route what you need to do is you need to go here on parameters and then select export after that you need to choose the export format in this case we'll choose the DJI pilot 2 format for the export you can see that the root name corresponds to the same that is in here so now let's click here on Save and now the route has been saved already to this folder so now the next step is we take the DJI smart controller and a USB cable that's connected to the computer alternatively you can also use the SD card and just connect the SD card from the controller to the computer but I find the cable to be a bit more convenient so now let's plug in the cable and so now our remote controller should already be shown in the computer and should be connected so now let's minimize this and so here you can see on the left side of the screen I have already the uh RC controller of mavic 3 Enterprise and here this is our exported route on the side so now we can just go to this folder ugcs Roots where I want to save my current route and then just take the kmz file and drag it in here and so now that's basically it once the file is copied then you can already take the smart controller like so let's open up now the jet file 2. here you can now go into flight root and then came Z import then I'll choose internal storage navigate to the folder where I have my root and you can see here this is the photogrammetry kmz file so now let's select that and now you can see this is the file over here so you can already go ahead now and open this up and so now you can see this is the same route that was created in your GCS so with the kmz feature all of the actions all the speeds and everything is exported to the J pilot 2 and yeah so basically after that once you have imported the root in here you can already proceed and fly your route that was planned in GCS and uh DJI pilotube so thank you for watching I hope that this video helped you understand a bit better how you can plan your flights in your GCS for mavic 3 Enterprise and m30 and m300 drones and Export these routes to DJI pile 2 and fly with them so as always save flights and see you in the next video [Music]

Channel: SPH Engineering - Control Your Drones!

Views: 7,325

Keywords: ugcs, uav, ground control, unnmanned vehicle, microdrone, microdrones, ardupilot, arduplane, ardu, UgCS, ground control software for drones, drone, drones, drone mission planning, desktop drone mission planning, DJI desktop mission planner, alternative to DJI mission planning, pixhawk, PX4, yuneec, drone swarm, drone swarm software, drone show, drone light show, integrated UAV, integrated drone system, integrated UAS, terrain following, mavic 3 enterprise, m3e, m30, m30t, m3t

Id: KjWKdfEc1j4

Length: 3min 24sec (204 seconds)

Published: Mon Oct 31 2022