Explaining Crawl Control

standard on the 4runner trail is crawl control a driving support system that helps the driver to concentrate on steering during low-speed off-road driving conditions an example of crawl controls outstanding capability is freeing the wheels when stuck crawl control is activated using a switch on the overhead console when crawl control is operational no pedal input is required from the drivers the system automatically controls the engine output individual brake hydraulic pressure enabling control over wheel spin and will mock up with crawl control activated the vehicle can be freed under its own power without crawl control over aggressive deceleration will only increase wheel spin by using crawl patrol the driver is able to confidently drive the vehicle out of almost any off-road situation crawl control has five speed settings that can be selected using crawl control switch on the overhead console the equal speed can be adjusted from one to three miles an hour over five increments to suit the driving condition when traversing rocky terrain a slow speed setting will help control the vehicle bring the driver from accelerator or brake operation and allowing the driver to concentrate on steering each wheel is controlled automatically enabling precise control over the wheel spin and will lock up contact between the vehicles under body and ground in rough or jagged terrain is reduced by maintaining a very low vehicle speed in order to help reduce unsprung loop mode on the drivetrain is also reduced because agent output and the hydraulic pressure the brakes are smoothly control sometimes four runners are capable but the people driving them aren't this is what happens without crawl control just to make sure you understand that you should never try this with your friend on top of the hill let's watch it once again and the exact same result stop with your foot over next you have to engage the four-wheel drive low range to do so shift the transmission into neutral then move the transfer case liver to the 4l setting then shift the transmission and either a forward or reverse gear press crawl control button to switch it on rotate the knob to select the speed and release the brake

Channel: The Saturday Morning Meeting

Views: 32,564

Rating: 4.830688 out of 5

Keywords: Toyota, Crawl, Control, KC, Nix, PK52, Excel, Automotive, Training, TCUV, Prove, It, The Saturday Morning Meeting, Saturday, Morning, Meeting

Id: R5ZGgnZSKmk

Length: 3min 0sec (180 seconds)

Published: Sat Feb 25 2017