Expanding Foam prop tutorial!

hi guys so today I'm going to do a tutorial for you on how to make expanding foam props can do things like this all over standing foam Wow okay so you need a can of expanding foam depending on the size of your project you may need a couple of these you can skip them from any hardware store I got mine from my team for about $12 a can so it's not too expensive I've used tokens for this project also you don't need a lot as you can see the bottom half is ready and drive at the top half I'm putting on exactly the same amount as I did the bottom half it does expand up to three times its size and while you're doing this try not to get on your hands either because it is very sticky and it doesn't come off once you've done that you just need to get some water and a spray bottle and you spray that that speeds up the curing process and then you'll just need to leave that for about 24 hours once it's fully dry you can then carve it using just a standard craft knife it does block your knives really quickly so you will need a few spare blades make sure when you're cutting you are cutting away from yourself otherwise you do end up with some accidents it has helped them to move before and as you can see this is the finish and then you can just coat it with some paper mache and that's the finished product project beer

Channel: Pink Star

Views: 77,755

Keywords: cosplay, expanding foam, props, Pink Star, tutorial, Foam, Erza Scalett, Fairy Tail

Id: WRKlUiaWZfI

Length: 1min 38sec (98 seconds)

Published: Sat Jun 14 2014