우드킴의 목공 꿀팁 / 우리 집 나무 원목 싱크대 셀프 만들기 방법 / 와 미친 대박 가성비 추천 인기 아이템 리뷰

Hello, this is Woodcutter Wood Kim. Today, you made Damyang Wancho's entire sink by yourself. Let's make a sink in this space . You've finished tile work on the walls. You must do the tile work before making the sink . As the space becomes smaller as the tile thickness, the maximum length of wood is 2400. Most sink tops are over 2400 in length, but in this case, you have to divide the top to make it. There is a hole in the middle, so I divided it into 3 parts. The side of the perforated part must also be left at least 100mm to prevent the top from splitting . The dimensions of the top of the sink are very important You need to leave the exact size of the hole and the location of the hole. When the sink top plate is accurately determined, place the bottom cabinet according to the drawing of the sink top plate . The advantage of making a lower cabinet with radiata pine solid wood is that the door will not fall off . Because the lower cabinets made by general sink manufacturers are all made of pb, the pb is completely empty . Damyang Wancho requested a door without a handle. This is a method that many sink companies do these days. In this case, you have to attach a wooden ruler with a ruler. You have to attach wood like this, so there is space in this area, so you can open and close the door . The same goes for the drawer . You can attach it like this. The point to note is that you have to cut the edge of the vertical partition in the middle of the vertical partition with a ruler so that the wood can be connected. Just cut the edge of the vertical partition wall . If you make the door 20mm smaller, your finger will enter It makes opening and closing the door easier However, the door is not made of solid wood. It is neatly made with a sink door. It is a matte milk white color. These days, it is more matte than glossy. The sink door leaf is provided as a finished product. There are various colors and you can order it in any color you want. Hinge perforation Because we will give it to you, you just need to attach it and you are done. There is no need to finish and no need to worry about warping of wood. If the door is made of wood, it is inevitable that there may be some cases where it bends slightly, but the sink door never bends. The sink top is elder. I overlapped the elder 20mm top plate by 20mm to make it look thicker, and the thickness of the sink top plate is 40mm. We attach all of the top plate auxiliary trees to you. The wood color and the white sink door go so well together. It's pretty . I secured the space for the dishwasher, and it fit perfectly . The wood in the drawer is 15mm cedar. If you have a Taka, you can do it with 12mm cedar, but most of our uncles don't have a Taka, so you have to use 15mm to combine pieces. The 12mm is too thin, so the piece may come out sideways while bonding. It's perfect even for an Irish dining table. It ’s women’s dream to have a power supply on the island table and even a sink bowl . Rather than looking at the wall to cook, we have a space for the legs below so that we can have a conversation while watching our family in the living room, cook, and even dine in a very spacious work space . Even the drawers that can be stored in the sink are perfect . Precautions for making the sink Be sure to finish the top and bottom of the sink. Make sure to combine the top and bottom cabinets to prevent the top from bending . Do not simply place the top on the lower cabinet. Making a sink like this, anyone who is a beginner can make it themselves. You can replace only the top of the wooden sink or just the door of the sink .

Channel: 우드킴TV woodkim

Views: 34,131

Keywords: 우드킴, 셀프인테리어, 목재, woodwork, woodworking, wooddiy, woodinterior, 인테리어, 목재재단, 오산목재, 목공, 목공기초, diy, diy가구, 셀프가구, 목공예, 합판, 각재, 싱크대만들기, 원목싱크대상판, 싱크대문짝교체, 싱크대상판교체, 원목싱크대

Id: sYcCyePCoSM

Length: 5min 27sec (327 seconds)

Published: Fri Jan 28 2022