ECOVACS DEEBOT T20 OMNI [DE]: Reinigung und Wartung

foreign [Music] scanning module wipe the sensor lens and the anti-collision bumper wipe the charging contacts [Music] take off the top cover take out the Dustbin remove the filter clean the primary filter and the inside of the Dustbin rinse the filter with water shake off the water droplets and dry it remove the mopping pad plate by pulling upwards with both hands remove the side brush clean the side brush and the slot hold down the rubber brush release button open the rubber brush cover plate and remove the rubber brush clean the rubber brush install the rubber brush and rubber brush cover plate clean the universal wheel clean the anti-drop sensors clean the drive wheel and wipe the rubber cover press the release button to open the dust bin use a cloth to wipe the Dustbin take out the dust bag by pulling the handle and replace it regularly install the new dust bag and close the dust bin press and hold the station button for 5 seconds and the cleaning Groove will automatically add water use a cleaning brush to clean the cleaning Groove press and hold the station button for another 5 seconds and the dirty water in the cleaning will be automatically withdrawn into the dirty water tank hold and turn the filter to one side remove one side of the Fastener and remove the filter after cleaning fit the filter to the bottom plate slide one side of the Fastener into the slot and then slide the other side of the Fastener to hear it click sound indicating that the installation is complete empty the dirty water tank place it back to the station and press it down to ensure it is correctly installed use a dry cloth to wipe the station and charging electrodes open the Clean water tank cover take out the filter open the filter cover take out the filter cotton clean it with clean water and reinstall it [Music]

Channel: ECOVACS Europe

Views: 8,132

Keywords:

Id: CDJAwpgLG_U

Length: 2min 48sec (168 seconds)

Published: Thu Jun 22 2023