Friends, everyone, a huge hello, I got my hands on this piece of ash, it’s glued together, but now we sawed it off. We also need a piece of stainless steel today. This is from an old hatchet. I recently made a release, I made this knife, and I still have this leftover, I didn’t throw it away. I’ll also need it today. It was a step, now according to the thickness of the step, let’s take away [music] a piece now approximately in the center. Well, because here is a semicircle, approximately. I took it in the center. I wanted to ask you to subscribe to my Telegram channel, I’ll leave a link in the description under video, but this is not just for the sake of it, it would be interesting, I decided to give away these cordless garden shears from the Green brand. The company has proven itself excellent, so I want to give it away on my site, I’ll make a post there, all the information will be there, so Subscribe and I think we will We regularly hold various competitions with prizes with you, I think it will be cool. So Subscribe, the link will be in the description and in the pinned comment. I'm waiting for you to visit. Well, when there is no wood lathe, there is a metal lathe. I installed a cone on one side that does not rotate. Rotate the kon now, I’ll tighten it a little bit, there will be a little brassiness. But we’ll do everything neatly and evenly. Beauty, I didn’t remove these sides on purpose because they will be useful to me now, now for the circular Pele set it so that somewhere in the middle I get it and now it will be necessary to the utmost [applause ] neatly [music] I'm tired of turning off the light guys and now I'm putting it on the handle [music] so friends, what do you and I have? I made this template for the blade, of course it didn't work out the first time. I adjusted it several times, that is, so that us in this way then it all worked Now we will transfer all this to stainless steel I of course wanted to use this escapement completely but unfortunately I won’t be able to do it I will have to I need this thick part was here here the butt if I start doing it here it will be Well, it’s not entirely correct, it’s not entirely convenient Well, at least I’ll use part like this and then we’ll catch up with the descent That is, as you understand, yes, it turns out that I have a descent here, but then we ’ll still make it fit into one whole, we’ll already make the descents arm themselves [music] ushm now let’s move on to the grinder and adjust it further; it turns out it’s not that easy. Well, now let’s try scrapping on ceramics. It always practically hands over [applause] [music] with the help of an orbital. I remove all the burrs that there were deep depressions on the lid . in general, this is the blade we have a little bit, of course I turned it, I didn’t want to make it matte at all. Well, it turned out like this, now we insert it into its original place and now it’s lying [music] Well, how to cover it with wax Well, heat the hairdryer a little so that the wax is well absorbed and wipe it dry immediately Ash color gives a beautiful color of course the wood is durable In the end we got a knife like this I didn’t even expect that it would turn out something similar so I decided to try it But in the end it turned out pretty good Now you can always go and buy mushrooms . Well, I corrected it a little on the pebble because I get almost a lens. Well, that is, I don’t need razor sharpness to cut the piece of paper , but this is how the knife turned out, friends. Of course, if you liked this issue, be sure to give a thumbs up Write what is your opinion, what should you do, what should you change in my opinion? It turned out pretty good now, so far it’s all a tough day to rivet it and it will be tight. Of course, maybe we need to come up with some kind of mechanism in the next one. Well, that’s in the next project, so write your opinion I wish you all good health Until we meet again, bye bye
