Hello! Welcome to my channel How are you today? Today's video, I will continue to share with you the methods that the talented plumber near my house solves common plumbing problems. In the first situation, this plumber discovered that his washing machine was having a problem with the water supply system, the water inflow was too small, making the washing process take longer and consume more electricity. so let's see how he will use this big PVC pipe to solve this problem Using a tape measure to mark and cut the tube in half was his first step next step, he proceeded to mark with a small external threaded connector and drilled on 2 large PVC caps this job will be extremely simple if you have a drill with a round drill as big as his then insert the 2 small external threaded connectors into the 1 holes he just drilled Please use a little strength to pinch it tightly Next to him, add a couple of short PVC pipes the goal of which is to attach a metal water lock. Can you guess what he's doing? In the other PVC cap he attached 2 similar small threaded pipes to the hole he drilled back to the PVC pipe he used his special broom to smear one end of the plastic tube with super glue. After that, it's not hard for us to guess that he will attach the PVC cap just now to one end of the pipe, right? At the other end of the plastic tube, he did the same and applied a layer of super glue and attach a plastic cap with a metal water lock attached to OK, now can you gues, what is this? It's a simple booster for any water supply system. Now this talented craftsman will install it in his washing machine. Let's wait and see how effective this device is First, he hammered 2 expansion nails into the wall, and used a piece of plastic pipe to attach the device he just created to the wall. Creating one above and one below will make the device more secure on the wall Have you ever tried using this method to attach objects to the wall? What do you think of his approach to this? Leave your comments below to let us know what you think! after mounting the device on the wall he connected the washing machine's water supply hose to it Using a screwdriver to tighten the screws of the internal termite was his way of making sure the water wouldn't leak. For electrical equipment, the leakage of water in a certain position can cause great danger, if it is light, it will short out a part or the whole electrical equipment, and if it is heavy, it can damage the whole electrical system and water in the house, so he needs to do things very carefully The next step, this talented plumber will connect the water source to the booster unit Then, his work is done Unlock the faucet and see how the water enters the washing machine this time wow, the water is already 2 3 times bigger than before, it's amazing! In the current state of increasingly rare water sources, rain water is considered one of the precious water sources, but the drainage system from this guy's new house seems so good, so good that it can even be discharged trash and leaves on the roof down. However, this water source cannot be used for washing hands or watering plants because it is too much garbage But it looks like this plumber got another idea from his water tank What will he do? If it were you, what would you do to get rid of all the trash and leaves in the case just now If you have any ideas please leave it below in the comments, we will be more than happy to help you make them happen. And if you don't have any ideas, then let's learn the way of this plumber Drilling a big round hole in the bottom of the bottle then removing all the outer packaging was his first step. Next he will make two marks with a PVC pipe on the body of the bottle Use a suitable drill to drill it into 2 holes Continue to use a marker to make a line to cut the neck of the bottle Although I can't imagine what he is designing, I have to admire his creativity. How did he come up with these ideas? Do you aspire to be a plumber or simply a professional DIY lover? Are you sure it's true? Because everyone wants to become an expert in a certain field, you and I are no exception. And this man will help us achieve that so why not hit the subscribe button to receive the latest videos from him the next step he will work with a perforated corrugated board like this a giant scissors he used to cut out a larger sized circle with the mouth of the bottle then cut the border of the circle like this Use your hands to bend the rest of the cut up so that it is perpendicular to the inner circle Continuing to use a compass to create a circle at the center, it seems he will continue to punch the center of this circle following this mark. Exactly, he's using a saw to cut a circle in the middle But it looks like he will shape this cut rather than gouge it out like I thought Um, he cut it into triangles then he proceeds to bend the triangles up like he did with the outline then use a small pair of scissors to cut off the tops of the triangles. Because this sheet of corrugated iron is quite thin, it won't be too difficult when you use a small pair of scissors like this to cut them put a big PVC pipe in the middle, and now I understand the intention of his actions just now. Doing so will make it easier for him to bond the corrugated board to the PVC pipe part To make them stick together more tightly, you need to use more candle glue around it on both the outside and the inside Previously I just thought that the job of plumbers would be to install plumbing, maintain and repair residential plumbing systems and commercial water supply systems. However, this plumber gave me a whole new perspective on them creative, responsive, hardworking and extremely intelligent. Next, he places a pen on top of a paint can, utilizing the height of the can. He marks a circle around the water bottle that has been drilled. Retrieving the tool he just crafted, he threads it inside the water bottle, aligning its cap with the position he marked on the can using the pen. The nail-firing tool will be his helpful assistant in this case, securing them back together. Now, he brings over the pre-shaped PVC pipes and inserts them into the holes on the can's surface, ensuring a firm reconnection. He uses candle wax and the nail-firing tool to accomplish this. For the skillful hands of passionate craftsmen, tasks demanding such meticulousness pose no challenge. We can see that he always pays attention to each small detail in his model - truly commendable, don't you think? Next, he removes the house's drainage pipe. After measuring the size, he trims a portion of the pipe and connects couplings with reducer fittings. Now, he positions the newly crafted model and marks the spot to drill holes on the inner wall. He adds two long threaded rods there. Can you guess their purpose? They will support the water container - quite ingenious, right? Adding another coupling, he proceeds to show us a video demonstrating how this structure operates. Wow! As the water is drained, the model captures debris and leaves, a very effective water filtration trick for us. If you're intrigued, give it a try and let us know the results! Heavy rain fills his drainage trough with leaves, a nagging issue that needs an immediate solution. Let's see what creative solution this man will come up with! A Coca-Cola bottle, huh? What will he create with it? Oh, peel off the outer shell. He attaches an external PVC threaded connector and outlines its dimensions on the bottle. After cutting the marked area into a circular shape, he screws the connector in and secures them together with candle wax. He adds pipes and connectors, and not just that, he also attaches pipes to the bottle neck. Can you guess what he is currently crafting? I believe that if we haven't seen how it operates, we won't know its purpose. At this moment, the skillful guy has taken the model he just crafted up onto the roof. After drilling holes in the drainage trough, he installs pipes and uses glue to secure them together. Isn't that fantastic? A simple trick that can prevent our roof gutter from ever clogging. I think this is a very useful trick every household should have. So, don't hesitate. After watching our video, go ahead and create one for your family, and don't forget to share the results in the comments section below! In the next tip, this man will share how he makes these corners of his carpet look neater. Using a thin piece of cardboard, he employs double-sided tape to attach the cardboard to his carpet. Continuing with a card, he edges the carpet to align perfectly with the wall corner. Now all he needs to do is flip the carpet over and cut the carpet along the edge of the thin cardboard. That's the trick done. Isn't that great? He has treated the corners of the carpet perfectly! Oh, this guy wants to use his saw to cut off a fixed screw from the wall. But no matter what he does, even after removing the saw blade from its fixed frame, he can't cut the screw. What should he do now? His solution starts with a piece of wood. He places the saw blade onto it and secures both ends of the blade to the wood with screws, curving the saw blade into an arch like this. This trick is really straightforward, right? If you feel the same way, give it a try and let us know the results! And now, I sincerely thank you for paying attention. Don't forget to like and subscribe to our channel to watch the latest and most interesting videos from us! See you in the next videos!
