Deckfast® Fascia System

Dec fascia boards are a great way to finish off a debt but when they're installed with traditional composite decks crews have a tendency to bow and warp off of the rim joists the deck fascia system provides solutions to this problem the deck passivation system is designed to work with both 1/2 inch and 3/4 dings facial boards there's two components to the system the tool and then the screws the fasteners are available in both carbon steel and stainless steel and our color match with all the leading deck boards here's how it works the deck fast fascia tool using the smart bit technology is designed to pre-drill encounter sink a hole it's actually bigger than the shank of the screw it allows the fascia board to freely expand and contract essentially what you're doing is you're floating the fascia board on the rim joist the tool uses the stop collar which controls the depth of the hole as a rubber bumper for added protection so you'll never Mar the surface that you're dealing with so when the collar stops you know you deep enough and it'll be perfect every time to allow the fascia board to freely float when inserting the screw just bring it so it's flush to the surface without over-tightening by using the deck fast fascia system you end up with a great finish without any of the worries and problems of the traditional method the only callbacks you get re pearls you

Channel: Starborn Industries

Views: 36,879

Rating: 4.8048782 out of 5

Keywords: deck fascia, deck screws, trex decking, trex fascia, trex fascia screws

Id: 6kZPHqRt0To

Length: 1min 31sec (91 seconds)

Published: Thu Jun 04 2015