Day-06 | How to Configure Port Forwarding DNAT in Fortigate Firewall

Hello friends welcome to my YouTube channel technique guide friends in this video I am going to tell you how to configure port forwarding destination net in photogate farewell and this is my van Zone and this is DMZ now friends what we will do when I will insert traffic to 887 it should be redirect to Valentine and when I will hit on this Port it should be redirect to villain 20 okay so let's see here how to do that okay it it we will take single IPR now we can delete that like uh this one okay now go to Virtual IP so we can delete this let me delete we will so I will show you from scratch okay we have to go to Virtual IPR just create new virtual IP okay now when do DMZ well in 10 okay now now interface will be when okay static net external IP will be 4.2.2.1 okay map IP 16.10.10 okay port forwarding so in for forwarding you can see external Port my external Port will be eight eight seven okay a map Port should be 21 okay don't you tell net okay now okay now we will create for edited create new virtual IP when when to DMZ villain 20 okay interface when static net external IP will be 4.2.2.1 same app will be here okay now prints we have to provide here map IP map IP will be 172 16 20.10 okay it will conflict but we have to enable here for forwarding so you will see 888 now it should be mapped to 21 okay now click on OK now friends we will create rule from here okay create parallel policy like when to d m z 20 10 when Port 2 outgoing interface will be our DMZ 10 okay source is all service all except source and disable okay now click on OK now again click on Virtual IP now we have to create network now we have to create policy for here right click and create viral policy so when to DMZ villain 20 okay damage between 20 outgoing interface should we went to and it Source interface will be source traffic all destinations donate here okay now select accept disabled layers Source net now click on OK now we have to select service all now click on OK now friends we have created here you can see went to DMZ 10 when traffic came to this one port number 887 it should be redirect to this one okay and when traffic come to edit it it should be redirect to 20 to 10 okay so let's initiate traffic here so let's try to tell it from here friends now friends you can see we have started debug here debug iptcp debug IP TCP packet okay so now let's initiate traffic for like uh telnet 4.2.2.1 now source so now destination Port 887 it should be redirect to 10.110 let's see well in 10 just ping enter so you can see we have received traffic from here thin so friends you can see we are receiving traffic from photo 2 to 10 port number eight at seven here okay now now friends let's insert traffic for 8. now let's initiator before 888 port so it should be redirect to you can see so friends in this video we have seen how to configure destination net in 40 gate firewall so thanks for watching this video have a nice day

Channel: TechNet Guide

Views: 3,213

Keywords: how to, technet guide, port forwarding in fortigate firewall, configure port forwarding on fortigate, fortigate firewall tutorial, fortiagate firewall for beginners, fortigate firewall full course, port forwarding destination nat, fortigate virtual ip port forwarding, fortigate port forwarding not working, destination nat, Fortigate port forwarding

Id: 3GQXNKoupt0

Length: 5min 48sec (348 seconds)

Published: Mon Jan 02 2023